MS-776 16 inch Welding Gloves Heat/Fire Resistant
The MS-776 is a 16 inch blue and yellow split cowhide MIG welding glove, fully lined with Kevlar stitching. The 16 inch cuff is the reason to choose it: forearm cover for overhead and vertical MIG work without moving to a specialist high-heat glove.
- 16 inch length covers the forearm for overhead and vertical welding
- Full lining keeps heat off the hand during sustained MIG runs
- Kevlar stitching holds the seams where spatter concentrates
- Two-colour split cowhide makes the pair easy to identify in a shared shop
Manufactured by Guangxi Dahua Mingshun Protective Products Co., Ltd in Dahua County, Guangxi, China. OEM and ODM available.
Who It Is For
- MIG welders working out of position
- Shops standardising on a long welding glove
- Distributors stocking 16 inch welding gloves
Problems It Solves
- Shorter gloves leave a gap at the forearm during overhead welds
- Unlined gloves get too hot for sustained MIG work
- Cotton thread burns out at the seams before the leather wears
Technical Data
| Model | MS-776 |
|---|---|
| Category | Welding GLoves |
| Length | 16 inch in length |
| Material | Premium blue/yellow split cowhide |
| Lining | Full lining |
| Stitching | Kevlar stitch |
| Standards | CE |
| Customisation | OEM and ODM, custom colours, labels and packaging |
Technical Features
- Premium blue/yellow split cowhide
- Full lining
- Kevlar stitch
Applications And Industries
- Welding
Where This Model Is Used
Overhead MIG welding
Vertical-up welding
Production welding cells
Repair and maintenance welding
How This Product Is Made And Checked
Raw Material Inspection
Leather and FR fabric are checked for thickness, grain, colour consistency and defects before cutting.
Cutting Control
Panels are cut to the pattern set for each model, with waste and orientation checked so the leather grain runs correctly.
In-Line Sewing Check
Kevlar thread, stitch density and reinforcement points are checked on the line while the garment is still being built.
Finished Product Inspection
Sizing, closures, snaps, straps and labelling are verified against the model specification.
Packing Inspection
Quantities, size splits, inner packing and carton marks are checked against the order before shipment.
Standards referenced on this model: CE. Test reports are supplied with export orders on request.
Use Guide
- Wear the gauntlet over the jacket sleeve for overhead work
- Keep gloves dry and rotate pairs between shifts
- Replace when the palm is worn through or the lining is compressed
Customisation Options
- Custom colours and leather combinations
- Own-brand labels, hang tags and cuff branding
- Custom size charts and mixed size splits
- Polybag printing, inner packing and carton marks
How It Compares With Other Models
| MS-702 14 inch glove | The MS-776 adds two inches of forearm cover and a full lining |
|---|---|
| MS-717 16 inch glove | Both are 16 inch and fully lined; the MS-776 is the MIG-focused colour combination |
Questions About The MS-776
What is the glove length?
What leather is used?
Is it fully lined?
Does it carry CE compliance?
Can it be branded for our range?
Other Models In This Category
Where This Model Is Specified
Guides That Cover This Product
Request A Quotation For The MS-776
Send the quantity, size split and any branding requirement. We will reply with pricing, lead time and sample options.