Boring
TPX611 Horizontal CNC milling boring machine
Resin sand molding high-quality castings, and two stress relief treatments.
The published data for this model lists x axis of mm 1400 1800 2000 2500 and y axis of mm 900 1200 1700 1900.
- Model code TPX611
- Supplied by Shaanxi Jiade Group Co., Ltd, Xi'an, China
- Trade terms FOB, CFR, CIF, payment TT 30% with order and 70% before shipment
- Manual, packing list and shipping documents included
Product Overview
What the TPX611 Horizontal CNC milling boring machine Does
Resin sand molding high-quality castings, and two stress relief treatments.
X, Y, Z all use servo motors to drive the ball screws to rotate via synchronous pulleys, with simple and reliable structure.
W axis is directly connected.
The boring shaft is equipped with a cutter cylinder, which makes loading and unloading tools convenient and fast.
Key Benefits
Why Workshops Buy This Machine
Keeps the Work In House
Operations that would otherwise be sent out stay on your floor, which is what removes worn bores that have to be restored instead of replaced.
Parameters You Can Plan Around
The published data for this model lists x axis of mm 1400 1800 2000 2500 and y axis of mm 900 1200 1700 1900.
Documented and Supported
The machine ships with an operation manual and a named contact who answers on WhatsApp, so commissioning questions do not go unanswered.
Matched Tooling Available
Chucks, arbors, vises and measuring equipment from the same supplier, quoted with the machine instead of chased separately.
Application Scenarios
Where the TPX611 Horizontal CNC milling boring machine Earns Its Place
- Restoring worn bores in housings and blocks
- Boring bearing seats to size after welding
- Fine boring cylinder liners and bushings
- Large ring and flange boring on a vertical table
Scenarios are typical for boring of this type. If your part is outside them, send the drawing and we will say plainly whether this model suits it.
Who It Is For
The Buyers This Machine Was Specified For
Problems It Solves
Three Situations This Machine Fixes
Subcontracting Delay
Sending this operation out adds days to every job. Running it in house on the TPX611 Horizontal CNC milling boring machine removes the queue you do not control.
Parts No Longer Available
When an original part cannot be bought, the only route left is to make or restore it, which needs the capacity this machine provides.
Unpredictable Quality
Work done on improvised equipment varies between operators. A purpose built machine with published parameters makes the result repeatable.
Technical Features
Features Listed by the Manufacturer
- It also has the rectangular coordinate system and pole of CNC machine tools.
- Coordinate system and process function of contour processing.
- Resin sand molding high-quality castings, and two stress relief treatments.
- X, Y, Z all use servo motors to drive the ball screws to rotate via synchronous pulleys, with simple and reliable structure.
- The boring shaft is equipped with a cutter cylinder, which makes loading and unloading tools convenient and fast.
- The main shaft and the swinging plate are controlled by AC servo motors.Horizontal boring machine XYZ axis is controlled by the CNC system, which can realize three-axis linkage.
Specifications
Published Parameter Table
| X axis | mm 1400 1800 2000 2500 |
|---|---|
| Y axis | mm 900 1200 1700 1900 |
| Z axis | mm 700 700 900 1100 |
| Axis | mm 600 600 800 800 |
| Worktable size | mm 900*1200 900*1300 1400*1600 1600*2000 |
Materials Manufacturing and Quality Control
How the Machine Is Built and Checked
Casting and Machining
Beds, columns and housings are machined in the group's production workshop on conventional and CNC equipment.
Assembly
Assembly is done in a dedicated workshop rather than on the production floor, which keeps swarf away from fitted surfaces.
Inspection
The inspection department checks components and assemblies before the machine goes to paint. Test records per machine are TBC on request.
Paint and Packing
Painting is done in house, then the machine is rust protected, crated and prepared for the container.
Certification scope for this model is marked TBC. We attach the certificates that actually apply to the machine and destination instead of publishing a blanket claim.
Customization Options
What Can Be Changed Before Production
- Motor voltage and frequency to match your supply, stated with the order
- Tooling and workholding packages selected for your first jobs
- Model variant chosen against your maximum workpiece size
- Documentation and marking requirements for your destination, TBC per country
Send a drawing of the part you need to produce. We select the model against that drawing rather than pushing the largest machine in the range.
Comparison With Other Models
Other Boring Models Worth Comparing
Use Guide
Before and After the Machine Arrives
Check the Foundation
Confirm floor loading, levelling points and the space needed around the machine before the container arrives.
Power and Air
Match supply voltage and frequency to the machine data plate and provide the isolator and any compressed air the model needs.
Level and Run In
Level the machine, check the oil levels, then run the spindle or drive up through its speed range before cutting.
First Article and Service
Machine a test piece, measure it, and keep a service schedule from day one. Send us the measurement if something looks wrong.
Related Products
More From the Boring Range
Related Guides and Solutions
Read Before You Order
Buying Guide
How to Choose a Metal Lathe for Your Shop
Swing, centre distance, spindle bore and drive type decide whether a lathe fits your work. Here is how to read those four figures before you compare prices.
ComparisonBench Upright and Radial Drilling Machines Compared
Bench, upright, gear head and radial drilling machines differ by how the work gets under the spindle. That single question usually settles the choice.
SolutionComplete Engine Rebuilding Workshop
A machine list that covers a cylinder head and block from strip-down to final assembly.
Answers
TPX611 Horizontal CNC milling boring machine Questions
What is the x axis of the TPX611 Horizontal CNC milling boring machine?
The manufacturer data for this model gives x axis mm 1400 1800 2000 2500. The full parameter list for every variant is in the specification table on this page and is confirmed in writing with the quotation.
Can you help me select the right variant of the TPX611 Horizontal CNC milling boring machine?
Yes. Send the part drawing, the workpiece size and the output you need and our engineers propose the model that fits. If you already know the model code, quote it and we confirm availability.
What are the trade and payment terms?
We work on FOB, CFR, CIF terms. Payment is TT 30% with order and 70% before shipment, or irrevocable L/C at sight. Orders placed through our Alibaba account carry trade assurance cover up to USD 300,000.
How is the TPX611 Horizontal CNC milling boring machine packed for export?
The machine is cleaned, rust protected and fixed to a pallet or into a wooden case sized for that machine, then stuffed into a container or shipped break bulk when it is over height. Packing is confirmed before production starts.
What is the delivery time?
Delivery depends on the model and on stock at the time of order, so we confirm a firm date on the proforma invoice instead of quoting one standard figure for the whole catalogue.
Do you supply tooling and spare parts for the TPX611 Horizontal CNC milling boring machine?
Yes. Chucks, arbors, vises and consumables are listed in our accessories range, and wear parts for this machine can be quoted with the machine or shipped later.
Get a Price for the TPX611 Horizontal CNC milling boring machine
Tell us the destination port and the variant you need. You get a specification, packing dimensions and a price.