Tapping
Tapping
Tapping Machine SWJ-10B, SWJ-6, SWJ-12, SWJ-16 & SWJ-24
simple structure and easy operation.
The published data for this model lists spindle travel of mm 40 and distance spindle axis to column generating line of mm 127 140 127 183 198 Max..
- Model code SWJ-10B SWJ-6 SWJ-12 SWJ-16 SWJ-24
- Supplied by Shaanxi Jiade Group Co., Ltd, Xi'an, China
- Trade terms FOB, CFR, CIF, payment TT 30% with order and 70% before shipment
- Manual, packing list and shipping documents included
Product Overview
What the Tapping Machine SWJ-10B, SWJ-6, SWJ-12, SWJ-16 & SWJ-24 Does
simple structure and easy operation.
It uses machine friction clutch make which prolong the life of motor working stable and low noise and also has the over loading protection function.
Key Benefits
Why Workshops Buy This Machine
Keeps the Work In House
Operations that would otherwise be sent out stay on your floor, which is what removes threads cut by hand and stripped on production parts.
Parameters You Can Plan Around
The published data for this model lists spindle travel of mm 40 and distance spindle axis to column generating line of mm 127 140 127 183 198 Max..
Documented and Supported
The machine ships with an operation manual and a named contact who answers on WhatsApp, so commissioning questions do not go unanswered.
Matched Tooling Available
Chucks, arbors, vises and measuring equipment from the same supplier, quoted with the machine instead of chased separately.
Application Scenarios
Where the Tapping Machine SWJ-10B, SWJ-6, SWJ-12, SWJ-16 & SWJ-24 Earns Its Place
- Repeat threaded holes in production batches
- Tapping after drilling on flanges and covers
- Thread work on thin sheet and brackets
- Assembly line thread preparation
Scenarios are typical for tapping of this type. If your part is outside them, send the drawing and we will say plainly whether this model suits it.
Who It Is For
The Buyers This Machine Was Specified For
Problems It Solves
Three Situations This Machine Fixes
Subcontracting Delay
Sending this operation out adds days to every job. Running it in house on the Tapping Machine SWJ-10B, SWJ-6, SWJ-12, SWJ-16 & SWJ-24 removes the queue you do not control.
Parts No Longer Available
When an original part cannot be bought, the only route left is to make or restore it, which needs the capacity this machine provides.
Unpredictable Quality
Work done on improvised equipment varies between operators. A purpose built machine with published parameters makes the result repeatable.
Specifications
Published Parameter Table
| Spindle travel | mm 40 |
|---|---|
| Distance spindle axis to column generating line | mm 127 140 127 183 198 Max. |
| Max. distance spindle nose to worktable | mm 245 310 240 485 545 Max. |
| Max. distance spindle nose to base | mm 375 / 370 660 760 |
| Worktable size | mm 196 x 196 200 x 200 |
| Dimension of base | mm 385 x 215 365 x 254 |
| Overall height | mm 800 767 810 1220 1075 |
| Gross / Net Wight | kg 63 / 43 74 / |
Materials Manufacturing and Quality Control
How the Machine Is Built and Checked
Casting and Machining
Beds, columns and housings are machined in the group's production workshop on conventional and CNC equipment.
Assembly
Assembly is done in a dedicated workshop rather than on the production floor, which keeps swarf away from fitted surfaces.
Inspection
The inspection department checks components and assemblies before the machine goes to paint. Test records per machine are TBC on request.
Paint and Packing
Painting is done in house, then the machine is rust protected, crated and prepared for the container.
Certification scope for this model is marked TBC. We attach the certificates that actually apply to the machine and destination instead of publishing a blanket claim.
Customization Options
What Can Be Changed Before Production
- Motor voltage and frequency to match your supply, stated with the order
- Tooling and workholding packages selected for your first jobs
- Model variant chosen against your maximum workpiece size
- Documentation and marking requirements for your destination, TBC per country
Send a drawing of the part you need to produce. We select the model against that drawing rather than pushing the largest machine in the range.
Comparison With Other Models
Other Tapping Models Worth Comparing
| Tapping Machine SWJ-10B, SWJ-6, SWJ-12, SWJ-16 & SWJ-24 | Spindle travel mm 40 · this page |
|---|---|
| Pneumatic/ Electric threading machine SRAM12, SRM-M16W, SRM-M24, SRM-M42W | ) Work direction Net Wight ( kg ) SRAM12 M3-M12 · compare |
| Gear type teeth distance tapping machine SB6516, SB6532 & SB6532A | Distance spindle axis to column generating line mm 257.5 252.5 / Max. · compare |
| Gear type teeth distance tapping machine SB408G, SB4516G & SB4516A | Diameter of column mm 56 56 / · compare |
| Lead-screw automatic tapping machine SB8030 | MODEL UNIT OD-35 Max. drilling diameter mm Φ35 · compare |
Use Guide
Before and After the Machine Arrives
Check the Foundation
Confirm floor loading, levelling points and the space needed around the machine before the container arrives.
Power and Air
Match supply voltage and frequency to the machine data plate and provide the isolator and any compressed air the model needs.
Level and Run In
Level the machine, check the oil levels, then run the spindle or drive up through its speed range before cutting.
First Article and Service
Machine a test piece, measure it, and keep a service schedule from day one. Send us the measurement if something looks wrong.
Related Products
More From the Tapping Range
Related Guides and Solutions
Read Before You Order
Buying Guide
How to Choose a Metal Lathe for Your Shop
Swing, centre distance, spindle bore and drive type decide whether a lathe fits your work. Here is how to read those four figures before you compare prices.
ComparisonBench Upright and Radial Drilling Machines Compared
Bench, upright, gear head and radial drilling machines differ by how the work gets under the spindle. That single question usually settles the choice.
SolutionComplete Engine Rebuilding Workshop
A machine list that covers a cylinder head and block from strip-down to final assembly.
Answers
Tapping Machine SWJ-10B, SWJ-6, SWJ-12, SWJ-16 & SWJ-24 Questions
What is the spindle travel of the Tapping Machine SWJ-10B, SWJ-6, SWJ-12, SWJ-16 & SWJ-24?
The manufacturer data for this model gives spindle travel mm 40. The full parameter list for every variant is in the specification table on this page and is confirmed in writing with the quotation.
Can you help me select the right variant of the Tapping Machine SWJ-10B, SWJ-6, SWJ-12, SWJ-16 & SWJ-24?
Yes. Send the part drawing, the workpiece size and the output you need and our engineers propose the model that fits. If you already know the model code, quote it and we confirm availability.
What are the trade and payment terms?
We work on FOB, CFR, CIF terms. Payment is TT 30% with order and 70% before shipment, or irrevocable L/C at sight. Orders placed through our Alibaba account carry trade assurance cover up to USD 300,000.
How is the Tapping Machine SWJ-10B, SWJ-6, SWJ-12, SWJ-16 & SWJ-24 packed for export?
The machine is cleaned, rust protected and fixed to a pallet or into a wooden case sized for that machine, then stuffed into a container or shipped break bulk when it is over height. Packing is confirmed before production starts.
What is the delivery time?
Delivery depends on the model and on stock at the time of order, so we confirm a firm date on the proforma invoice instead of quoting one standard figure for the whole catalogue.
Do you supply tooling and spare parts for the Tapping Machine SWJ-10B, SWJ-6, SWJ-12, SWJ-16 & SWJ-24?
Yes. Chucks, arbors, vises and consumables are listed in our accessories range, and wear parts for this machine can be quoted with the machine or shipped later.
Get a Price for the Tapping Machine SWJ-10B, SWJ-6, SWJ-12, SWJ-16 & SWJ-24
Tell us the destination port and the variant you need. You get a specification, packing dimensions and a price.