Guillotine Shears
QC11K Series CNC hydraulic gulloting shear
All steel welded structure, vibrating treatment of ageing for removal of internal stress, with good rigidity and stability.
Detailed parameters for this model are confirmed in writing with the quotation, so the figures you plan around are the figures on the order.
- Model code QC11K
- Supplied by Shaanxi Jiade Group Co., Ltd, Xi'an, China
- Trade terms FOB, CFR, CIF, payment TT 30% with order and 70% before shipment
- Manual, packing list and shipping documents included
Product Overview
What the QC11K Series CNC hydraulic gulloting shear Does
All steel welded structure, vibrating treatment of ageing for removal of internal stress, with good rigidity and stability.
Integrated hydraulic transmission system, with good reliability.
Triple support rolling guide raikl to eliminate gaps of support and enhnce shearing quality.
Mechanical rear stopper with manual fine tuninfg, and digital indication Clearance in between shearing blades adjusted by hand wheel to be quyick,accurate and convenient.
Key Benefits
Why Workshops Buy This Machine
Keeps the Work In House
Operations that would otherwise be sent out stay on your floor, which is what removes plate cuts that are out of square before forming starts.
Parameters You Can Plan Around
Detailed parameters for this model are confirmed in writing with the quotation, so the figures you plan around are the figures on the order.
Documented and Supported
The machine ships with an operation manual and a named contact who answers on WhatsApp, so commissioning questions do not go unanswered.
Matched Tooling Available
Chucks, arbors, vises and measuring equipment from the same supplier, quoted with the machine instead of chased separately.
Application Scenarios
Where the QC11K Series CNC hydraulic gulloting shear Earns Its Place
- Squaring plate before bending
- Cutting blanks for fabrication
- Trimming welded assemblies
- Strip cutting for brackets
Scenarios are typical for guillotine shears of this type. If your part is outside them, send the drawing and we will say plainly whether this model suits it.
Who It Is For
The Buyers This Machine Was Specified For
Problems It Solves
Three Situations This Machine Fixes
Subcontracting Delay
Sending this operation out adds days to every job. Running it in house on the QC11K Series CNC hydraulic gulloting shear removes the queue you do not control.
Parts No Longer Available
When an original part cannot be bought, the only route left is to make or restore it, which needs the capacity this machine provides.
Unpredictable Quality
Work done on improvised equipment varies between operators. A purpose built machine with published parameters makes the result repeatable.
Technical Features
Features Listed by the Manufacturer
- Shear angle: built-in shear angle adjustable function.
- Blade gap: encoder feedback, show the blade gap timely, simple easy to use.
- One key backup and recovery, recovery parameters at any time.
- All buttons on the panel are sensitive switch, have passed EMC, High-Low temperature, vibration, etc.
- strict testing to ensure the stability and service life.
- It has been certified by CE, meet the demand of overseas market.
Specifications
Published Parameter Table
The original manufacturer data sheet for this model is supplied with the quotation. Capacity, motor rating and machine weight are confirmed in writing before an order is placed rather than estimated here. TBC.
Materials Manufacturing and Quality Control
How the Machine Is Built and Checked
Casting and Machining
Beds, columns and housings are machined in the group's production workshop on conventional and CNC equipment.
Assembly
Assembly is done in a dedicated workshop rather than on the production floor, which keeps swarf away from fitted surfaces.
Inspection
The inspection department checks components and assemblies before the machine goes to paint. Test records per machine are TBC on request.
Paint and Packing
Painting is done in house, then the machine is rust protected, crated and prepared for the container.
Certification scope for this model is marked TBC. We attach the certificates that actually apply to the machine and destination instead of publishing a blanket claim.
Customization Options
What Can Be Changed Before Production
- Motor voltage and frequency to match your supply, stated with the order
- Tooling and workholding packages selected for your first jobs
- Model variant chosen against your maximum workpiece size
- Documentation and marking requirements for your destination, TBC per country
Send a drawing of the part you need to produce. We select the model against that drawing rather than pushing the largest machine in the range.
Comparison With Other Models
Other Guillotine Shears Models Worth Comparing
| QC11K Series CNC hydraulic gulloting shear | Parameters supplied with quotation · this page |
|---|---|
| Hand Guillotine Shear Machine GS-1000 | Max.shearing thickness( mm ) 1 1 1 1 1.6 · compare |
| Foot Power Shearer Q11 | Parameters supplied with quotation · compare |
| QC12Y large hydraulic swing beam shear | Max Cutting Thickness mm 6 3 Max · compare |
| Shearing Machine Hydraulic Q35y-20 | Max. Hole punching thickness ( mm ) 16 20 25 30 Max. · compare |
Use Guide
Before and After the Machine Arrives
Check the Foundation
Confirm floor loading, levelling points and the space needed around the machine before the container arrives.
Power and Air
Match supply voltage and frequency to the machine data plate and provide the isolator and any compressed air the model needs.
Level and Run In
Level the machine, check the oil levels, then run the spindle or drive up through its speed range before cutting.
First Article and Service
Machine a test piece, measure it, and keep a service schedule from day one. Send us the measurement if something looks wrong.
Related Products
More From the Guillotine Shears Range
Related Guides and Solutions
Read Before You Order
Buying Guide
How to Choose a Metal Lathe for Your Shop
Swing, centre distance, spindle bore and drive type decide whether a lathe fits your work. Here is how to read those four figures before you compare prices.
ComparisonBench Upright and Radial Drilling Machines Compared
Bench, upright, gear head and radial drilling machines differ by how the work gets under the spindle. That single question usually settles the choice.
SolutionSheet Metal Fabrication Line
Cutting, bending and rolling equipment sized to the plate thickness you actually run.
Answers
QC11K Series CNC hydraulic gulloting shear Questions
Can you help me select the right variant of the QC11K Series CNC hydraulic gulloting shear?
Yes. Send the part drawing, the workpiece size and the output you need and our engineers propose the model that fits. If you already know the model code, quote it and we confirm availability.
What are the trade and payment terms?
We work on FOB, CFR, CIF terms. Payment is TT 30% with order and 70% before shipment, or irrevocable L/C at sight. Orders placed through our Alibaba account carry trade assurance cover up to USD 300,000.
How is the QC11K Series CNC hydraulic gulloting shear packed for export?
The machine is cleaned, rust protected and fixed to a pallet or into a wooden case sized for that machine, then stuffed into a container or shipped break bulk when it is over height. Packing is confirmed before production starts.
What is the delivery time?
Delivery depends on the model and on stock at the time of order, so we confirm a firm date on the proforma invoice instead of quoting one standard figure for the whole catalogue.
Do you supply tooling and spare parts for the QC11K Series CNC hydraulic gulloting shear?
Yes. Chucks, arbors, vises and consumables are listed in our accessories range, and wear parts for this machine can be quoted with the machine or shipped later.
Which documents come with the machine?
Operation manual, packing list, commercial invoice and the shipping documents your destination requires. Tell us at order stage if you need specific test reports or certificates so they can be prepared.
Get a Price for the QC11K Series CNC hydraulic gulloting shear
Tell us the destination port and the variant you need. You get a specification, packing dimensions and a price.