Press Machine
Power Press Machine J23
J23 series Open Eccentric Presses is a general-purpose presses, suitable for forming, blanking, punching, bending and other cold stamping process.
The published data for this model lists nominal force of mm 3 and slide stroke of mm 35 60 55 70 80 100.
- Model code J23
- Supplied by Shaanxi Jiade Group Co., Ltd, Xi'an, China
- Trade terms FOB, CFR, CIF, payment TT 30% with order and 70% before shipment
- Manual, packing list and shipping documents included
Product Overview
What the Power Press Machine J23 Does
J23 series Open Eccentric Presses is a general-purpose presses, suitable for forming, blanking, punching, bending and other cold stamping process.
C-frame Casting fuselage,maximum rigidity and minimum deflection for accurate parts and long tool life.
body can be tilted, , high rigidity and less deformation Compact.
Thick plates and large columns provide you with the stable platform you need for your demanding application.
Key Benefits
Why Workshops Buy This Machine
Keeps the Work In House
Operations that would otherwise be sent out stay on your floor, which is what removes forming and straightening work done with improvised tooling.
Parameters You Can Plan Around
The published data for this model lists nominal force of mm 3 and slide stroke of mm 35 60 55 70 80 100.
Documented and Supported
The machine ships with an operation manual and a named contact who answers on WhatsApp, so commissioning questions do not go unanswered.
Matched Tooling Available
Chucks, arbors, vises and measuring equipment from the same supplier, quoted with the machine instead of chased separately.
Application Scenarios
Where the Power Press Machine J23 Earns Its Place
- Blanking and piercing sheet parts
- Straightening shafts and plates
- Pressing bearings and bushings in assembly
- Forming brackets and small housings
Scenarios are typical for press machine of this type. If your part is outside them, send the drawing and we will say plainly whether this model suits it.
Who It Is For
The Buyers This Machine Was Specified For
Problems It Solves
Three Situations This Machine Fixes
Subcontracting Delay
Sending this operation out adds days to every job. Running it in house on the Power Press Machine J23 removes the queue you do not control.
Parts No Longer Available
When an original part cannot be bought, the only route left is to make or restore it, which needs the capacity this machine provides.
Unpredictable Quality
Work done on improvised equipment varies between operators. A purpose built machine with published parameters makes the result repeatable.
Specifications
Published Parameter Table
| Nominal Force | mm 3 |
|---|---|
| Slide Stroke | mm 35 60 55 70 80 100 |
| Max. Die Height | mm 110 130 160 170 180 180 |
| Die Height Adjustment | mm 30 |
| Between Slide Center & Frame | mm 110 130 160 170 210 200 |
| Bolster (FB × LR) | mm 200×310 240×360 300×450 320×480 400×600 380×610 |
| Hole Dia. × Dpth × Low Hole Dia.) | mm Φ60 Φ120×20 ×Φ100 Φ100 Φ100 Φ120 |
| Bolster Thickness | mm 40 |
| Bolster Opening (Dia. × FB × LR) | mm Φ140×110×160 Φ130×90 ×180 Φ210×160 ×240 Φ210×160 |
| Slide Area (FB × LR) | mm 120×140 150×170 180×200 180×200 210×250 210×250 |
| Shank Hole (Dia. × Dpth) | mm Φ30×55 Φ30×55 Φ40×60 Φ40×60 Φ40×70 Φ40×60 |
| Between Columns | mm 150 180 220 220 260 300 |
| Motor Power | kW 0.75 1.1 1.5 1.5 2.2 |
| Outline Size (FB × LR × H) | mm 780×610 ×1505 915×700 ×1690 1150×900 ×1910 |
| Net Weight | kg 360 600 1080 1080 1900 2440 |
Materials Manufacturing and Quality Control
How the Machine Is Built and Checked
Casting and Machining
Beds, columns and housings are machined in the group's production workshop on conventional and CNC equipment.
Assembly
Assembly is done in a dedicated workshop rather than on the production floor, which keeps swarf away from fitted surfaces.
Inspection
The inspection department checks components and assemblies before the machine goes to paint. Test records per machine are TBC on request.
Paint and Packing
Painting is done in house, then the machine is rust protected, crated and prepared for the container.
Certification scope for this model is marked TBC. We attach the certificates that actually apply to the machine and destination instead of publishing a blanket claim.
Customization Options
What Can Be Changed Before Production
- Motor voltage and frequency to match your supply, stated with the order
- Tooling and workholding packages selected for your first jobs
- Model variant chosen against your maximum workpiece size
- Documentation and marking requirements for your destination, TBC per country
Send a drawing of the part you need to produce. We select the model against that drawing rather than pushing the largest machine in the range.
Comparison With Other Models
Other Press Machine Models Worth Comparing
| Power Press Machine J23 | Nominal Force mm 3 · this page |
|---|---|
| J01series manual mini press | Parameters supplied with quotation · compare |
| JB04 Series Table small Press Machine | Stork of slide mm 40 · compare |
| J21 Series Open Type Press Punching Machine | Parameters supplied with quotation · compare |
| Operated Hydraulic Press MDY100 | ) Mass( kg ) MDY100/35 1000 30 350 7.6 · compare |
Use Guide
Before and After the Machine Arrives
Check the Foundation
Confirm floor loading, levelling points and the space needed around the machine before the container arrives.
Power and Air
Match supply voltage and frequency to the machine data plate and provide the isolator and any compressed air the model needs.
Level and Run In
Level the machine, check the oil levels, then run the spindle or drive up through its speed range before cutting.
First Article and Service
Machine a test piece, measure it, and keep a service schedule from day one. Send us the measurement if something looks wrong.
Related Products
More From the Press Machine Range
Related Guides and Solutions
Read Before You Order
Buying Guide
How to Choose a Metal Lathe for Your Shop
Swing, centre distance, spindle bore and drive type decide whether a lathe fits your work. Here is how to read those four figures before you compare prices.
ComparisonBench Upright and Radial Drilling Machines Compared
Bench, upright, gear head and radial drilling machines differ by how the work gets under the spindle. That single question usually settles the choice.
SolutionComplete Engine Rebuilding Workshop
A machine list that covers a cylinder head and block from strip-down to final assembly.
Answers
Power Press Machine J23 Questions
What is the nominal force of the Power Press Machine J23?
The manufacturer data for this model gives nominal force mm 3. The full parameter list for every variant is in the specification table on this page and is confirmed in writing with the quotation.
Can you help me select the right variant of the Power Press Machine J23?
Yes. Send the part drawing, the workpiece size and the output you need and our engineers propose the model that fits. If you already know the model code, quote it and we confirm availability.
What are the trade and payment terms?
We work on FOB, CFR, CIF terms. Payment is TT 30% with order and 70% before shipment, or irrevocable L/C at sight. Orders placed through our Alibaba account carry trade assurance cover up to USD 300,000.
How is the Power Press Machine J23 packed for export?
The machine is cleaned, rust protected and fixed to a pallet or into a wooden case sized for that machine, then stuffed into a container or shipped break bulk when it is over height. Packing is confirmed before production starts.
What is the delivery time?
Delivery depends on the model and on stock at the time of order, so we confirm a firm date on the proforma invoice instead of quoting one standard figure for the whole catalogue.
Do you supply tooling and spare parts for the Power Press Machine J23?
Yes. Chucks, arbors, vises and consumables are listed in our accessories range, and wear parts for this machine can be quoted with the machine or shipped later.
Get a Price for the Power Press Machine J23
Tell us the destination port and the variant you need. You get a specification, packing dimensions and a price.