Grinding
M618 surface grinding machine
The castings are made of mikhanna high strength cast iron, which is annealed and seasoned.
The published data for this model lists working table movement max grinding length of mm 500 Max. and max. grinding width of mm 190.
- Model code M618
- Supplied by Shaanxi Jiade Group Co., Ltd, Xi'an, China
- Trade terms FOB, CFR, CIF, payment TT 30% with order and 70% before shipment
- Manual, packing list and shipping documents included
Product Overview
What the M618 surface grinding machine Does
The castings are made of mikhanna high strength cast iron, which is annealed and seasoned.
High precision and good rigidity 2.
Worktable is made of steel, with high precision steel ball, wear resistance, light movement and high efficiency.
The manual worktable is driven by synchronous belt with high stability.
Key Benefits
Why Workshops Buy This Machine
Keeps the Work In House
Operations that would otherwise be sent out stay on your floor, which is what removes parts sent out for finish grinding after every heat treatment batch.
Parameters You Can Plan Around
The published data for this model lists working table movement max grinding length of mm 500 Max. and max. grinding width of mm 190.
Documented and Supported
The machine ships with an operation manual and a named contact who answers on WhatsApp, so commissioning questions do not go unanswered.
Matched Tooling Available
Chucks, arbors, vises and measuring equipment from the same supplier, quoted with the machine instead of chased separately.
Application Scenarios
Where the M618 surface grinding machine Earns Its Place
- Finishing shafts after heat treatment
- Surface grinding of dies, plates and fixtures
- Centreless grinding of pins and rollers in batch
- Resharpening cutting tools in the tool room
Scenarios are typical for grinding of this type. If your part is outside them, send the drawing and we will say plainly whether this model suits it.
Who It Is For
The Buyers This Machine Was Specified For
Problems It Solves
Three Situations This Machine Fixes
Subcontracting Delay
Sending this operation out adds days to every job. Running it in house on the M618 surface grinding machine removes the queue you do not control.
Parts No Longer Available
When an original part cannot be bought, the only route left is to make or restore it, which needs the capacity this machine provides.
Unpredictable Quality
Work done on improvised equipment varies between operators. A purpose built machine with published parameters makes the result repeatable.
Specifications
Published Parameter Table
| Working table movement Max Grinding Length | mm 500 Max. |
|---|---|
| Max. Grinding width | mm 190 |
| Distance From Table Surface To Spindle Center | mm 335 |
| Type rall with steel-ball Maximum work load | kg 200 |
| Table size | mm 460*180 |
| Number of T -Slot | mm *n 14*1 |
| Table speed m/ | min 3-23 |
| Front and rear wheel feed | mm 0 02/Graduation 2.5/revolution |
| On the hand wheel feed | mm 0.01/Graduation 1.25/revolution |
| Wheel Size (diaXwidth X bore) | mm 180*13*31.75 |
| Packing Size (LxWxH) | mm 1240*1080*1800 |
Materials Manufacturing and Quality Control
How the Machine Is Built and Checked
Casting and Machining
Beds, columns and housings are machined in the group's production workshop on conventional and CNC equipment.
Assembly
Assembly is done in a dedicated workshop rather than on the production floor, which keeps swarf away from fitted surfaces.
Inspection
The inspection department checks components and assemblies before the machine goes to paint. Test records per machine are TBC on request.
Paint and Packing
Painting is done in house, then the machine is rust protected, crated and prepared for the container.
Certification scope for this model is marked TBC. We attach the certificates that actually apply to the machine and destination instead of publishing a blanket claim.
Customization Options
What Can Be Changed Before Production
- Motor voltage and frequency to match your supply, stated with the order
- Tooling and workholding packages selected for your first jobs
- Model variant chosen against your maximum workpiece size
- Documentation and marking requirements for your destination, TBC per country
Send a drawing of the part you need to produce. We select the model against that drawing rather than pushing the largest machine in the range.
Comparison With Other Models
Other Grinding Models Worth Comparing
| M618 surface grinding machine | Working table movement Max Grinding Length mm 500 Max. · this page |
|---|---|
| External Cylindrical Grinder M1320/M1332/M1350 | Center height mm 135 180 270 · compare |
| Conventional Universal Cylindrical Grinding Machine M1420/M1432/1450/M1463 | Center height mm 125 180 270 370 · compare |
| Surface Grinding Machine M7150/M7163/M7170/M7180 | Parameters supplied with quotation · compare |
| Surface Grinding Machine M7120/M7130/M7140 | Max.grinding size(LxWxH) mm 1000*200*400 100*320* 400 1000*400*400 1000*500*500 · compare |
Use Guide
Before and After the Machine Arrives
Check the Foundation
Confirm floor loading, levelling points and the space needed around the machine before the container arrives.
Power and Air
Match supply voltage and frequency to the machine data plate and provide the isolator and any compressed air the model needs.
Level and Run In
Level the machine, check the oil levels, then run the spindle or drive up through its speed range before cutting.
First Article and Service
Machine a test piece, measure it, and keep a service schedule from day one. Send us the measurement if something looks wrong.
Related Products
More From the Grinding Range
Grinding
Conventional Universal Cylindrical Grinding Machine M1420/M1432/1450/M1463
View specifications →
Related Guides and Solutions
Read Before You Order
Buying Guide
How to Choose a Metal Lathe for Your Shop
Swing, centre distance, spindle bore and drive type decide whether a lathe fits your work. Here is how to read those four figures before you compare prices.
ComparisonBench Upright and Radial Drilling Machines Compared
Bench, upright, gear head and radial drilling machines differ by how the work gets under the spindle. That single question usually settles the choice.
SolutionMachine Shop Start Up Package
The four processes a general job shop needs before it can quote most local work.
Answers
M618 surface grinding machine Questions
What is the working table movement max grinding length of the M618 surface grinding machine?
The manufacturer data for this model gives working table movement max grinding length mm 500 Max.. The full parameter list for every variant is in the specification table on this page and is confirmed in writing with the quotation.
Can you help me select the right variant of the M618 surface grinding machine?
Yes. Send the part drawing, the workpiece size and the output you need and our engineers propose the model that fits. If you already know the model code, quote it and we confirm availability.
What are the trade and payment terms?
We work on FOB, CFR, CIF terms. Payment is TT 30% with order and 70% before shipment, or irrevocable L/C at sight. Orders placed through our Alibaba account carry trade assurance cover up to USD 300,000.
How is the M618 surface grinding machine packed for export?
The machine is cleaned, rust protected and fixed to a pallet or into a wooden case sized for that machine, then stuffed into a container or shipped break bulk when it is over height. Packing is confirmed before production starts.
What is the delivery time?
Delivery depends on the model and on stock at the time of order, so we confirm a firm date on the proforma invoice instead of quoting one standard figure for the whole catalogue.
Do you supply tooling and spare parts for the M618 surface grinding machine?
Yes. Chucks, arbors, vises and consumables are listed in our accessories range, and wear parts for this machine can be quoted with the machine or shipped later.
Get a Price for the M618 surface grinding machine
Tell us the destination port and the variant you need. You get a specification, packing dimensions and a price.