Injection moulding machines at the DANQ plant

The Factory Behind The Range

Moulding, grid assembly, electrical testing and export packing, all in one building in Beiyuan Industrial Park, Yiwu. These are the actual photographs and the actual documents, with the numbers on them.

Ask For The Certificate Pack See All Products

Inside The Plant

Every Stage In One Building

Each photograph below comes from the DANQ plant, with a note on what the stage does and why it matters to a buyer.

DANQ assembly line with workers building mosquito swatter heads — Swatter assembly runs on lines staffed by the same operators who handle mesh alignment and grid fitting, so a fault is traced to a station rather than to a subcontractor.

Injection moulding machines at the DANQ plant in Yiwu — Handles frames and plastic swatter heads are moulded in-house, which is what makes an engraved logo or a colour change a tooling job rather than a supply chain negotiation.

DANQ technician inspecting mosquito swatter circuit boards — High voltage boards are inspected before they go into the handle. Grid output is checked against the published 3000-4000 V rating.

Mosquito swatter heads stacked in cartons on the DANQ line — Finished rackets are counted into cartons at the line. Carton size and piece count follow the figures published on each model page.

The DANQ sales and export office in Yiwu — Quotations, artwork proofs and certificate copies come from this office. One team handles the order from enquiry through to shipping marks.

The DANQ team at the Yiwu plant — The company has manufactured electric mosquito swatters and household products in Yiwu since 2007.

Quality Control

What Gets Checked And When

Incoming Material

Mesh, mouldings and electrical components checked against the model specification before they reach the line

Grid Assembly

Mesh layers aligned and fitted, guard layers added on three layer models

Electrical Test

High voltage output checked against the published rating for the model

Charge Test

Rechargeable models charged and discharged on each supported cord and cable type

Weight And Dimension

Finished weight checked against the published tolerance, typically plus or minus 5 g

Packing Check

Carton count, carton dimensions and shipping marks verified before container loading

Certificates And Test Reports

Named Numbered And Dated

A certificate is only evidence if it names the model and the standard. Here is exactly what DANQ holds, with the issuing body and the report number on each one.

LCIE Bureau Veritas China

CE EMC Attestation

Number 2166AB03ASEZ38670. Product Mosquito Racket, references BS01 BS02 JC-11 FLY01 FL01NGSP, DC 3V. Standards EN 55014-1:2017+A11:2020 and EN 55014-2:2015 under EMC Directive 2014/30/EU. Report ASEZ-ESH-P21030217B dated 19 March 2021.

DEKRA Testing and Certification (Shanghai) Ltd

CE LVD Attestation

Attestation of conformity issued for the DANQ mosquito swatter range under the Low Voltage Directive.

Third-party laboratory certificate

RoHS Certificate Of Conformity

Certificate of conformity held for the mosquito racket range. PFS01 and PFS11 in the plastic family are also listed with RoHS.

DEKRA Testing and Certification (Shanghai) Ltd

PAHs Test Report

Report 3177321.50QS covering polycyclic aromatic hydrocarbon content against AfPS GS 2014:01.

DEKRA Testing and Certification China Ltd

REACH Phthalates Report

Phthalate content test letter issued for DANQ mosquito swatter samples.

The five certificates and test reports held by Yiwu DANQ Household Products — The certificate set as displayed by DANQ: CE-EMC, CE-LVD, RoHS, PAHs and REACH. Full copies are emailed on request so you can check the model references against your packing list.

Export Record

Where The Output Goes

More than 99% of what DANQ produces is exported, to Europe, America, Oceania and Asia. The company has manufactured from Yiwu since 2007.

2007Manufacturing Since

25Export Models

1000 pcsMOQ On Electric Models

4 RegionsEurope America Oceania Asia

Buyer Questions

Questions About The Factory

Can we visit the factory?

Yes. The plant is at 3F No. 5 Building, No. 621 Airport Road, Beiyuan Industrial Park, Yiwu, Zhejiang. Email [email protected] to arrange a date.

Which certificate names which model?

The CE EMC attestation from LCIE Bureau Veritas China names BS01, BS02, JC-11, FLY01 and FL01NGSP. Individual model pages state the certificates recorded for that model. Ask us and we send the documents so you can check the references yourself.

Do you have customer references we can contact?

We do not publish customer names or reviews. Buyers of this category usually prefer their supplier relationships stay private, and we hold ourselves to the same rule.

What is inspected before a container is loaded?

Grid output against the model rating, charging on rechargeable models, finished weight against the published tolerance, then carton count, carton dimensions and shipping marks.

How long has the company been manufacturing?

Yiwu DANQ Household Products Co., Ltd. was founded in 2007 and has made electric mosquito swatters and household products since then.

Come And See It Or Ask For The Documents

Visitors are welcome at the Yiwu plant, and the full certificate pack goes out by email the same working day where we can.

Request A Quote Contact The Team