Yiwu DANQ Household Products Co., Ltd. · Yiwu Zhejiang China · Manufacturing since 2007 [email protected] +86 13777918968
DANQ assembly line in Yiwu with workers assembling yellow mosquito swatter heads

Mosquito Swatters And Insect Killer Lamps Built For Container Buyers

25 export models with published voltage, carton size and container loading. Moulded, assembled and tested in one plant in Yiwu since 2007.

2007Manufacturing Since
25Export Models
1000 pcsMOQ On Electric Models
4 RegionsEurope America Oceania Asia
Injection moulding machines in the DANQ plant used for swatter handles and frames

Handles Frames And Mesh Heads Made Under One Roof

Injection moulding, grid assembly, electrical testing and export packing run in the same building, so a tooling change on your model does not travel between suppliers.

DANQ technician inspecting the high voltage circuit board of a mosquito swatter

Tested To The EU Directives Before It Reaches Your Carton

CE EMC and LVD attestations, RoHS certificate and PAHs and REACH test reports cover the DANQ mosquito racket range. Copies go out by email with your quotation.

What Problem We Solve

Where Pest Control Sourcing Goes Wrong

Low-cost pest-control hardware is easy to buy badly. Grids that were never EMC tested get stopped at the border, thin mesh heads arrive bent, and cartons nobody measured waste a third of the container. DANQ publishes the voltage, the carton size and the container loading for every model, and ships rackets already tested to the EU directives.

Untested Grids Stopped At The Border

An electric racket is a low-voltage product with a high-voltage grid inside. DANQ holds a CE EMC attestation from LCIE Bureau Veritas China and a CE LVD attestation from DEKRA, plus RoHS, PAHs and REACH reports, and sends copies with the quotation.

Landed Cost That Cannot Be Modelled

This is a light, bulky category where freight decides profitability. Carton size and 20 ft GP and 40 ft HQ loading are published per model, from 24300 pcs on BS04 down to 1700 pcs on IK0240T.

Four Suppliers For One Aisle

Battery rackets, single layer price leaders, rechargeable hero models, moulded plastic swatters and plug-in lamps all come out of one plant in Yiwu, on one packing list, with one set of documents.

Own-Brand That Rubs Off In Transit

On plastic models the logo is engraved into the tool rather than printed. On electric models it is printed on the handle and on packaging proofed with you before the run.

Why Choose DANQ

One Factory One Packing List One Set Of Documents

One factory since 2007, 25 models across five product families, CE EMC and LVD attestations plus RoHS, PAHs and REACH test reports on file, and OEM packing accepted from 1000 pcs on electric models.

2007Manufacturing Since
25Export Models
1000 pcsMOQ On Electric Models
4 RegionsEurope America Oceania Asia
Inside The Plant

Moulding Assembly And Testing Under One Roof

Real photographs from the DANQ plant in Beiyuan Industrial Park, Yiwu. Every stage from the moulding shop to the packing bench sits in the same building.

DANQ assembly line with workers building mosquito swatter heads
Swatter assembly runs on lines staffed by the same operators who handle mesh alignment and grid fitting, so a fault is traced to a station rather than to a subcontractor.
Injection moulding machines at the DANQ plant in Yiwu
Handles frames and plastic swatter heads are moulded in-house, which is what makes an engraved logo or a colour change a tooling job rather than a supply chain negotiation.
DANQ technician inspecting mosquito swatter circuit boards
High voltage boards are inspected before they go into the handle. Grid output is checked against the published 3000-4000 V rating.

Visit The Factory Page

Solutions

From Enquiry To Container

Three things buyers ask us to solve: producing under their own brand, satisfying the EU documentation, and making the freight arithmetic work.

Documents On File

Certificates And Test Reports

  • CE EMC Attestation — LCIE Bureau Veritas China
  • CE LVD Attestation — DEKRA Testing and Certification (Shanghai) Ltd
  • RoHS Certificate Of Conformity — Third-party laboratory certificate
  • PAHs Test Report — DEKRA Testing and Certification (Shanghai) Ltd
  • REACH Phthalates Report — DEKRA Testing and Certification China Ltd

Ask For The Certificate Pack

Buyer Questions

Questions Importers Ask First

What does DANQ actually manufacture?
Electric mosquito swatters, plastic fly swatters and UV or LED insect killer lamps. Twenty-five export models across five families, moulded, assembled and tested in one plant in Yiwu.
What is the minimum order quantity?
1000 pcs per model for normal packing on electric swatters, and 10000 pcs on plastic fly swatters. BS45 is listed at 3000 pcs. The lamp range has no MOQ in the DANQ record, so we confirm it per order.
Which certificates does DANQ hold?
A CE EMC attestation from LCIE Bureau Veritas China under Directive 2014/30/EU, a CE LVD attestation from DEKRA, a RoHS certificate of conformity, a PAHs report against AfPS GS 2014:01 and a REACH phthalates report. Copies are emailed with the quotation.
Can you produce under our own brand?
Yes. OEM logo on the handle, customised bag or box artwork and customised carton shipping marks are accepted from the normal MOQ. On plastic models the logo can be engraved into the tool.
How do we work out the shipping cost per unit?
Each model page publishes the carton size and the pieces that load into a 20 ft GP and a 40 ft HQ where the DANQ record covers it, from 24300 pcs on BS04 down to 1700 pcs on IK0240T.
Where do DANQ products ship to?
More than 99% of output is exported, to Europe, America, Oceania and Asia.

Send Us A Model Code And A Quantity

Tell us the models and the quantity you have in mind and we come back with pricing, packing options and the container figures. Certificate copies go out with the quotation.