Tractor Trucks
6*4 Wheel 420 HP New Sino 6x4 Prime Mover Right Hand Drive Sinotruk Howo Used
- ConditionNew
- CabC7H-P/G,C7H-F/U
- CertificationsISO9001/14001CE
Tractor Trucks
Chinese Best Brand Tractor Truck Made in China
The unit features a MAN H3000-style cab with a single sleeper, air conditioning, and a 400L fuel tank.
- Condition New
- Cab onesleeperwithac,twose
- Size 6800*2496*2958
- Horsepower 351-450hp
- Truck Model SX4255HT324
Stock number held for this listing: 10141
Key Benefits
What This Unit Does Well
- WP10.380E22 engine is a widely used powerplant in Sinotruk fleets, so filters, injectors and oil are readily available in export markets
- 12JSD200T-B gearbox offers 12 forward speeds with a robust design suitable for long-haul and heavy-load operations
- 3175+1350 mm wheelbase balances stability on highways and manoeuvrability in tight yards and ports
- 400L fuel tank supports extended runs between refuelling points in remote or underdeveloped regions
- MAN 7.5T front and 13T STR3.866 rear axles provide strong load capacity for heavy cargo on mixed terrain
- Single sleeper cab with air conditioning is suitable for two-driver shifts on multi-day hauls
Application Scenarios
Where It Is Used
- Long-haul transport of household appliances and consumer goods across Central Asia on gravel and asphalt roads
- Wood and fruit logistics where consistent temperature control is needed and fuel stops are infrequent
- Container transport between inland depots and coastal ports with mixed road conditions and limited maintenance access
- General freight haulage in African and Middle Eastern markets where Euro II compliance is accepted and AdBlue is unavailable
Fit
Who It Is For
- Fleet owners replacing older prime movers and seeking a reliable, spec-matched tractor head
- Contractors who need a tractor head that shares parts with existing Sinotruk dump trucks or trailers
- Machinery dealers stocking used but serviceable tractor heads for resale in emerging markets
- Logistics operators running mixed cargo routes with limited access to spare parts and repair facilities
Buyer Pain
Problems It Solves
- Downtime caused by engine or transmission parts that are not stocked locally in markets without European or OEM supply chains
- Uncertainty over exact axle ratios and chassis codes when applying for import permits or customs clearance
- Tractor heads that are underpowered for loaded gradients or lack sufficient fuel capacity for long stretches
- High operating costs from mismatched engines and transmissions that do not match the route profile
Engineering
Technical Features
- Direct injection fuel system with EURO II emission standard
- 12JSD200T-B manual transmission with 12 forward gears and 2 reverse gears
- 850X270 (8+4) ladder frame chassis with welded steel construction
- MAN 7.5T front axle and 13T STR3.866 rear axle in 6x4 drive layout
- Single sleeper cab with air conditioning, sunroof, and four-point air suspension
- Air brake system with ABS optional, 165Ah battery, and 400L fuel tank
Specification
Specification Table for This Listing
Taken from the supplier specification we hold. Anything not listed here is confirmed in writing before order rather than assumed.
| Condition | New |
|---|---|
| Cab | onesleeperwithac,twoseats |
| Size | 6800*2496*2958 |
| Horsepower | 351-450hp |
| Truck Model | SX4255HT324 |
| Drive Wheel | 6x4 |
| Dimensions L x W x H unloaded | 6860 x 2490 x 3710 mm |
| Wheelbase | 3175+1350 mm |
| Engine Model | WP10.380E22 |
| Emission | EURO II |
| Fuel Type | Diesel |
| Fuel Tank Capacity | 400 L |
| Transmission | 12JSD200T-B, 12 forward / 2 reverse |
| Steering System | ZF8198 |
| Front Axle | MAN 7.5T |
| Rear Axle | 13T STR3.866 |
| Tyre | 12.00R20 |
| Gross Vehicle Weight | 25000 kg |
| Max Speed | 110 km/h |
| Max Gradient Ability | 20% |
| Approach Angle | 22° |
| Departure Angle | 66° |
| Transmission Type | Manual |
| Emission Standard | Euro 2 |
| Engine Capacity | > 8L |
| Brand Name | tractor truck |
Materials
Materials and Build
- Welded steel ladder frame chassis in the SX4255 series
- Steel cab shell with factory paint finish, red by default
- Cast steel front and rear axle housings with heat-treated components
- Zinc-coated steel fuel tank with 400L capacity and fuel gauge
Process
How an Order Is Handled
- You send the route profile, payload and trailer type you will pull
- We confirm the chassis code, axle ratio and engine type against the ten units in stock
- You review the final specification sheet, including colour, cab and tyre before deposit
- Unit is prepared, photographed and video recorded before loading
- We book RoRo or container shipment and issue the export documents your customs needs
Quality Control
Checks Before Loading
- Chassis, engine and gearbox numbers are photographed and matched to the specification sheet you approved
- Engine start, gear engagement and air system are recorded on video before loading
- Paint, glass and cab trim are checked for transport damage at the loading port
- Loading and lashing photos are sent before the vessel departs
Customisation
What Can Be Changed
- Cab colour other than the default red
- Sleeper layout, single or double bunk
- Left hand or right hand drive as your registration requires
- Tyre brand and spare wheel count
- Additional fuel tank, tool box or fifth wheel height change
Honest Comparison
How It Compares With the Alternatives
| 4x2 tractor head | The 6x4 carries more on the drive axles for loaded gradients but costs more fuel when running empty on good roads |
|---|---|
| EURO III emission tractor units | EURO II avoids AdBlue supply and sensor faults in markets without reliable urea, but cannot be registered where EURO III is mandatory |
Use Guide
Using It Well
- Replace fuel and oil filters on the interval set for WP10 engines, not on a generic schedule
- Keep the air dryer cartridge stocked, humid coastal routes shorten its life
- Order the clutch plate and injector set with the truck so the first service does not wait on shipping
Photographs
More Views of This Unit
Photographs held for this listing. Current yard photographs of the specific unit you shortlist are taken fresh before any balance is paid.
Source Specification
Manufacturer Text We Hold for This Listing
chinese best brand tractor truck made in China Now we have 10 units 6x4 tractor truck ready for shipment, which were produced in 2015, price is very good. Product Description WE WILL PROVIDE THE GREAT SERVICE AND DO OUR BEST TO SATISFY YOUR DEMAND. Quick Details Main specifications of Tractor Truck 6X4 Transport type Commodity transportation logistics (Standard transport) Logistics type Food, fruit, wood, household appliances and other department stores Drive 6X4 6X4 6X4 Max Weight(t) ≤70 ≤55 ≤90 Max Speed 110 95 95 Loaded speed(km/h) 50~70 50~75 40~60 Vehicle model SX4255HT324 SX4255HT324C SX4255HU324 Engine WP10.380E22 ISM385 WP12.400E201 Emission standard Euro II Euro III Euro II Displacement 9.726L 10.8L 11.596L Rated Output 280KW 283KW 294KW Max. torque 1460N.m 1835N.m 1920N.m Transmission 12JSD200T-B 12JSD200T-B 12JSD200T-B Clutch 430 430 430 Frame 850X270 (8+4) 850X270 (8+4) 850X3
Reproduced from the supplier specification. Figures are confirmed in writing on the proforma invoice before any deposit.
Related Listings
Other Tractor Trucks Buyers Compare With This
Tractor Trucks
Dongfeng Chenglong H7 Euro 5 10 Wheels 480 Hp 6x4 Used Truck Tractor Units
- ConditionNew
- Size6800x2490x3668
- ColorOptional
Tractor Trucks
390 Hp 6x4 Rhd Light Weight Tractor Truck for Towing Tank Semi Trailer for Zim
- ConditionNew
- Size6800x2490x3668
- ColorOptional
Tractor Trucks
371HP 6x4 Long Head Tractor Head Truck with Cheap Tractor Truck
- ConditionNew
- Dimensions(L*W*H)6800x2496x3125/3730
- Size6800x2496x3125/3730
Tractor Trucks
2023 Year New Heavy Duty 10 Wheeler Trailer Head 6x4 420hp Tractor Truck
- ConditionNew
- Dimensions(L*W*H)6985*2550*3600
- Size6985*2550*3600
Tractor Trucks
6x4 Tractor Truck Low Price Sale
- ConditionNew
- Dimensions(L*W*H)6985*2550*3600
- Size6985*2550*3600
Buyer Questions
Questions About This Unit
Is this unit new or used
The unit is used, produced in 2015, and one of ten available for immediate shipment. We provide photos, hours and chassis numbers before you commit.
What is the lead time
Units in stock can be prepared and loaded within 7 to 10 days after deposit. No build time required.
Can you supply spare parts for this truck later
Yes. WP10 filters, injectors, clutch parts and axle components are available and can be consolidated with the truck order.
Do you ship by container or RoRo
Tractor heads normally go RoRo. Container shipment is possible with the cab lowered on some routes. We quote both so you can compare landed cost.
What documents do I get for customs
Commercial invoice, packing list, bill of lading and certificate of origin as standard, plus any pre-shipment inspection certificate your country requires.
Price This Unit Against Your Port
Send the destination and quantity. A written specification, landed cost and shipping option comes back.