
Retention and Drainage Aid
Every point of first-pass retention lost is filler and fines paid for and thrown away.
Keeping fines, fillers and dye in the sheet, and keeping the water loop clean enough that they stay there.
First-pass retention sets how much of your filler, fines and dye you are paying for twice.
PolyDADMAC and Polyamine are high charge density cationic polymers that bind anionic fines, fillers and dyes to fibre.
Retention and Drainage Aid formulations target both, but drainage rate is what sets machine speed.
Defoamer types - silicone, polyether and fatty alcohol based - suit different pulp systems, and work through stock prep, white water and coating colour.
PolyDADMAC also does duty in wastewater treatment, removing suspended solids and colour. DADMAC 65% is available for mills polymerising their own aids.

Every point of first-pass retention lost is filler and fines paid for and thrown away.

Anionic trash in a closed loop drags down retention and drainage at the same time.

Retention, drainage and wet strength are usually three products and three dosing points.

Foam in stock prep and white water becomes sheet defects and slower drainage.

Mills and formulators polymerising cationic aids in-house need monomer with consistent concentration and low impurity.
Keeping fines, fillers and dye in the sheet, and keeping the water loop clean enough that they stay there.
Retention and Drainage Aid, PolyDADMAC, Polyamine, Defoamer, DADMAC 65%.
Send the grade, furnish and target and we will give a dosage starting point and the sequence to run. Technical questions go to the same WhatsApp thread.
Send the grade and the target and we will walk the sequence with you.