Slim LED Wall Washer W36
This serial products has slim structure, one by one is connected for the decoration of big building.
Product Overview
A slim-profile LED wall washer designed for continuous linear illumination on large architectural surfaces, with a modular connection system allowing multiple units to be linked end-to-end. The aluminum housing with tempered glass lens provides a rigid, weather-resistant enclosure suitable for indoor and outdoor installations. Available in 12W, 14W, 18W and 24W models, each with a 1000mm length and a 36mm width, the fixture delivers high brightness with uniform light distribution and vivid color rendering. The Osram branded LED chips ensure consistent performance across the run. Dimmable options include 0/1-10V, Triac and DALI, with color-changing functions available in RGB and RGBW. The fixture operates on DC24V and has an effective projection distance of 5 to 10 meters, making it suitable for façades, landscapes and public spaces where consistent, directional light is needed.
Key Benefits
- Slim 36mm width profile allows for discreet installation on building surfaces without dominating the architectural line
- Modular connection system enables multiple units to be linked end-to-end for long continuous runs
- High brightness with uniform light distribution and CRI ≥80 or ≥90 for accurate color representation
- IP65/IP67 rating with corrosion-resistant aluminum housing allows use in outdoor and wet environments
- Adjustable brackets simplify wall and building mounting without requiring additional hardware
- Effective projection distance of 5 to 10 meters ensures consistent illumination across large surfaces
- Dimmable via 0/1-10V, Triac or DALI for integration with building management and smart lighting systems
- No UV/IR radiation and mercury-free operation supports green lighting compliance and safety
Problems It Solves
- Thick or bulky wall washers disrupt the clean line of architectural façades and are visually intrusive
- Non-modular fixtures require individual mounting and wiring, increasing installation time and cost
- Low CRI lighting distorts colors in materials like stone, metal and paint on building surfaces
- Non-dimmable or incompatible control systems prevent integration with existing building automation
- Non-weatherproof fixtures fail prematurely in outdoor or wet environments
- Poor beam control causes uneven light spill or loss of directionality over distance
Application Scenarios
- Architectural façades of commercial buildings, hotels and office towers requiring consistent linear lighting
- Landscaping features such as retaining walls, steps and garden edges with outdoor exposure
- Commercial venues like shopping malls, retail stores and exhibition halls needing accent lighting
- Public spaces including plazas, parks and pedestrian walkways with outdoor installation needs
- Events and entertainment venues using RGB/RGBW models for dynamic color effects and stage lighting
- Industrial and municipal areas such as warehouses, bridges and public infrastructure with durable lighting requirements
Who It Is For
- Architectural lighting contractors specifying linear wash lighting for building exteriors
- Public works departments sourcing durable, weatherproof wall washers for municipal projects
- Event production teams needing RGB/RGBW wall washers for stage and venue effects
- Commercial property developers requiring consistent, low-maintenance lighting for façades
- Landscape architects integrating linear lighting into outdoor hardscape and path features
Engineering Detail
Technical Features
- Modular connection system allows multiple units to be linked end-to-end
- Aluminum housing with tempered glass lens provides structural rigidity and weather resistance
- Osram branded LED chips ensure consistent color and lumen output across units
- CRI ≥80 or ≥90 for accurate color rendering in architectural and commercial applications
- Beam angles of 5°, 10°, 24°, 30°, 45° or 60° allow selection based on coverage and focus needs
- Effective projection distance of 5 to 10 meters for consistent illumination over large surfaces
- Dimmable via 0/1-10V, Triac or DALI for integration with smart and building control systems
- Operating temperature range from -20°C to +50°C supports use in cold and hot climates
Materials
- Corrosion-resistant aluminum housing for structural strength and outdoor durability
- Tempered glass lens providing impact resistance and optical clarity
- Osram branded LED chips for consistent color and long-term performance
- Internal heat sink structure to manage thermal load and extend lifespan
Specifications
Technical Data
Values taken from our product datasheet. Anything not listed here is confirmed per order.
| Model number | WK-T1XQ-12W / WK-T1XQ-14W / WK-T1XQ-18W / WK-T1XQ-24W |
|---|---|
| Power | 12W / 14W / 18W / 24W |
| Input voltage | DC24V |
| Size | W36 × H24 × L1000mm |
| Beam angle | 5° / 10° / 24° / 30° / 45° / 60° |
| CCT | 2700K - 7000K / R/G/B / RGB / RGBW |
| CRI | ≥80 / ≥90 |
| Light efficacy | 120 lm/W / 130-150 lm/W (optional) |
| IP grade | IP65 / IP67 |
| Operating temperature | -20°C ~ +50°C |
| Lifespan | >50,000H (L90, Tc=55°C) |
| Warranty | 3 / 5 years |
| LED type | Osram chip |
| Function | Dimmable (0/1-10V, Triac, DALI) / Color-changing (RGB/RGBW) |
Manufacturing Process
- LED array assembled on the internal substrate using Osram chips at the specified density
- Housing and tempered glass lens assembled to form the sealed enclosure
- Modular connectors installed for end-to-end linking of multiple units
- Electrical and optical testing performed on each unit before packaging
- Final inspection for IP65/IP67 sealing, beam angle, color consistency and dimming function
Quality Control
- Products are 100% tested before delivery
- Branded LED chips (Osram) and high quality raw materials used in production
- CRI, CCT and beam angle verified against the ordered specification
- IP65/IP67 sealing tested under controlled conditions to ensure weather resistance
Customization Options
- LED quantity and beam angle selected based on the required projection distance and coverage
- Color temperature from 2700K to 7000K, or RGB/RGBW, to match the project’s lighting design
- Dimming method chosen from 0/1-10V, Triac or DALI depending on the control system in use
- Power output selected from 12W, 14W, 18W or 24W to match the brightness target
- Connector type and mounting bracket configuration specified to match the installation drawing
Honest Comparison
How It Compares With the Alternatives
| Plastic housing wall washers | Aluminum housing offers better heat dissipation and durability in outdoor and high-temperature environments |
|---|---|
| Fixed beam angle models | Multiple beam angles allow selection based on projection distance and coverage needs |
| Non-dimmable fixtures | Dimmable options with 0/1-10V, Triac and DALI enable integration with smart and building control systems |
Use Guide
Getting the Best Out of It On Site
- Use the 5° to 10° beam angles for focused, long-distance projection (5–10m)
- Select 24° to 60° beam angles for wider, more diffuse wash effects on large surfaces
- Install with adjustable brackets to align the beam angle to the target surface
- Ensure end-to-end connections are made with the correct modular connectors for electrical continuity
- Use DC24V power supply with sufficient current capacity for the total number of units in the run
- Avoid direct immersion in water; IP65/IP67 is rated for rain and splash exposure, not sustained submersion
Related Products
Others in This Range
Slim LED Wall Washer W38
This serial products has slim structure, one by one is connected for the decoration of big...
View specifications →
LED Wall Washer Projection Lamp W186
This serial product actually we can call led linear projection lamps, which have the bigger power for the decoration of...
View specifications →
Adjustable and Retrofit Led Downlight WK-RE-C-XW
Light output is focused through small round holes, delivering strong directivity, ideal for accent lighting on walls,...
View specifications →
Adjustable and Retrofit Led Wall Wash Downlight
Perfect for creating a beautiful and even illumination on walls, highlighting architectural features or artwork in a...
View specifications →Where This Product Is Used
Technical Guides
How to Choose LED Beam Angle 15 24 36 and 50 Degrees
How to select the right beam angle for LED spot lights, downlights, and wall washers based on ceiling height and target
Read guide →IP20 IP65 IP67 and IP68 Explained for LED Strip and Fixtures
What each IP rating means for LED strips and fixtures. Which products have IP68, IP67, IP65, or IP20. Practical guidance
Read guide →Buyer Questions
Questions About Slim LED Wall Washer W36
What is the minimum order quantity?
Small order quantities are accepted. Send the model, power, beam angle and quantity you need and we will confirm the minimum for that configuration.
Can the beam angle and dimming method be customized?
Yes. Beam angle can be selected from 5°, 10°, 24°, 30°, 45° or 60°. Dimming method can be 0/1-10V, Triac or DALI as specified.
Is this wall washer suitable for outdoor use?
Yes. It is rated IP65/IP67 with corrosion-resistant aluminum housing, suitable for outdoor and wet environments.
What is the effective projection distance?
The effective projection distance is 5 to 10 meters, depending on beam angle and ambient conditions.
Can the color temperature be changed to 2700K or 7000K?
Yes. Color temperature ranges from 2700K to 7000K, and RGB/RGBW options are available for color-changing applications.
What warranty is provided?
A 3-year or 5-year warranty is provided depending on the model and order terms. Confirm with the sales team when quoting.
What payment methods do you accept?
Different payment methods are accepted. Confirm the terms with our sales team when the order is quoted.
Request a Quote for Slim LED Wall Washer W36
Send the quantity, colour temperature and any customisation you need. Our sales team will confirm the configuration, lead time and price.