Led Bulbs A60 10W/9W/7W/5W
A60 LED bulb is a pear-shaped lighting device with a 60mm diameter, serving as an energy-efficient, long-lasting alternative to traditional incandescent bulbs for residential and commercial use.
Product Overview
A standard A60 LED bulb with a 60mm diameter and pear-shaped design, built to replace incandescent bulbs in residential and commercial settings. The bulb uses original branded LED chips for consistent output and long life, with a plastic surface and aluminum inner housing for heat dissipation and structural stability. Available in 5W, 7W, 9W and 10W power options, each delivering 450 to 1050 lumens with a wide beam angle of 220 degrees. Offers dimmable control from 5% to 100% with flicker-free performance, instant-on capability, and a colour temperature range from 2200K to 6500K. Certified to CE, RoHS, FCC, SAA and PSE standards, and available in single colour or dual colour versions. Designed for direct replacement in standard E27 or E26 lamp holders.
Key Benefits
- Pear-shaped A60 design fits standard lamp holders and matches traditional bulb aesthetics
- Original branded LED chips ensure consistent light output and long operational life
- Flicker-free operation with dimming range from 5% to 100% for smooth brightness control
- Instant-on performance with no warm-up delay, suitable for frequent switching
- Wide beam angle of 220 degrees provides broad, even illumination in rooms
- Available in 5W, 7W, 9W and 10W models with lumens from 450 to 1050 for different brightness needs
- Dual colour version available for flexible lighting scenarios
- Certified to CE, RoHS, FCC, SAA and PSE, meeting international electrical safety standards
Problems It Solves
- Traditional incandescent bulbs consume high power and have short lifespans
- Low-quality LED bulbs often flicker or have poor dimming performance
- Non-dimmable bulbs cannot be used in systems requiring brightness control
- Bulbs with narrow beam angles create uneven or directional lighting
- Lack of certification prevents market entry in regulated regions like Europe and North America
- Mismatched base types (E27/E26) prevent direct replacement in existing fixtures
- Poor heat dissipation in plastic-only housings reduces LED lifespan
Application Scenarios
- Residential living rooms, bedrooms and hallways needing a direct replacement for incandescent bulbs
- Commercial offices and retail spaces where consistent, flicker-free lighting is required
- Recessed ceiling fixtures and pendant lights using E27 or E26 bases
- Dimmable lighting systems in homes and hotels where smooth brightness adjustment is needed
- Areas requiring instant light without delay, such as stairwells and hallways
- Spaces where energy efficiency and long life reduce maintenance frequency
- Dual colour bulbs used in ambient lighting where warm and cool light are switched based on time of day
Who It Is For
- Overseas lighting distributors stocking standard A60 bulbs for residential and commercial markets
- Electrical wholesalers supplying replacement bulbs for home and office use
- OEM/ODM brands integrating A60 bulbs into smart lighting systems or fixtures
- Project contractors specifying energy-efficient, long-life bulbs for new builds or retrofits
Engineering Detail
Technical Features
- Pear-shaped A60 body with 60mm diameter and 112–118mm length depending on power
- Original branded LED chips for stable light output and long life
- Flicker-free operation with dimming range from 5% to 100%
- Instant-on capability with no warm-up delay
- Beam angle of 220 degrees for wide, even light distribution
- Input voltage range AC85–265V / AC220V / AC110V for global compatibility
- Colour temperature range 2200K to 6500K for warm to cool white light
- CRI Ra 80 or 90 for accurate colour rendering
- Dual colour version available for mixed lighting needs
Materials
- Plastic outer surface for lightweight, shatter-resistant body
- Aluminum inner housing for heat dissipation and structural support
- Original branded LED chips for consistent light output and longevity
- High-transparency PC cover for maximum light transmission
Specifications
Technical Data
Values taken from our product datasheet. Anything not listed here is confirmed per order.
| Model number | WK-BL-P07-10W / WK-BL-P07-9W / WK-BL-P07-7W / WK-BL-P07-5W |
|---|---|
| Size | ￠60*118 mm (10W), ￠60*112 mm (7W/5W) |
| Power | 5W, 7W, 9W, 10W |
| Lumens | 450 lm (5W), 630 lm (7W), 810 lm (9W), 1050 lm (10W) |
| Input voltage | AC85-265V / AC220V / AC110V |
| Beam angle | 220° |
| CCT | 2200-6500K |
| CRI (Ra) | 80 / 90 |
| Base | E27 / E26 |
| Housing material | Plastic surface + aluminum inside |
| Dimming | 5% to 100%, flicker-free |
| Certifications | CE, RoHS, FCC, SAA, PSE |
Manufacturing Process
- LED chips mounted on driver board with appropriate thermal management
- Plastic and aluminum housing assembled around the driver and LED array
- PC cover installed for light diffusion and protection
- Electrical and performance testing for dimming, voltage range, and light output
- Final inspection and packaging before shipment
Quality Control
- Products are 100% tested before delivery
- Branded LED chips and high quality raw materials used in production
- Colour temperature and CRI verified against ordered specification
- Dimming range tested from 5% to 100% with no flicker observed
- Certifications verified and documented for each batch
Customization Options
- LED quantity and power output selected from available 5W, 7W, 9W and 10W models
- Colour temperature from 2200K to 6500K available in single colour or dual colour versions
- CRI Ra 80 or 90 based on project requirements
- Base type E27 or E26 selected based on fixture compatibility
- Order quantity adjusted to meet small order needs
Honest Comparison
How It Compares With the Alternatives
| Standard incandescent bulb | A60 LED uses less power, lasts longer, and produces less heat |
|---|---|
| Low-cost generic LED bulb | Original branded chips and proper thermal design improve reliability and lifespan |
| Bulb with no dimming | This model supports 5% to 100% dimming with flicker-free output |
Use Guide
Getting the Best Out of It On Site
- Use only in fixtures with E27 or E26 base compatibility
- Ensure input voltage matches the local supply (AC85–265V supports global use)
- Do not use in fully enclosed fixtures unless rated for enclosed use
- For dimming, use a compatible dimmer switch that supports 5% to 100% control
- Dual colour bulbs should be wired to a switch that allows colour change
- Avoid touching the bulb with bare hands during installation to prevent oil residue on the lens
Related Products
Others in This Range
Led Candle Light Bulb C38
LED candle light is a kind of light bulb. It is named because its shape is similar to the shape of the candle flame....
View specifications →
Led Candle Light Bulb C37
LED candle light is a kind of light bulb. It is named because its shape is similar to the shape of the candle flame....
View specifications →
Led Bulbs A80 13W/12W/11W
A80 LED bulb is a large-format lighting solution with a 80mm diameter, this bulb is perfectly suited for high-ceiling...
View specifications →
Led Bulbs G40 Bulb 5W/4W
This serial of bulb is small and global type. It is a popular lighting product known for its energy efficiency and...
View specifications →Where This Product Is Used
Technical Guides
Understanding CRI Ra 80 90 and 95 in LED Lighting
What CRI Ra measures, where Ra>90 and Ra>95 are worth specifying, and how CRI trades against efficacy above 90 lm/W on L
Read guide →LED Dimming Compared Triac DALI 0-10V and PWM
Which dimming protocols are supported on your LED downlights, spot lights, and silicone flexible strips. Triac, DALI, 0-
Read guide →Buyer Questions
Questions About Led Bulbs A60 10W/9W/7W/5W
What is the minimum order quantity?
Small order quantities are accepted. Contact sales with your required model and quantity for confirmation.
Can the colour temperature be customised?
Yes. Available in 2200K to 6500K single colour or dual colour versions.
Is this bulb dimmable?
Yes. It supports dimming from 5% to 100% with flicker-free operation.
What certifications does it have?
It is certified to CE, RoHS, FCC, SAA and PSE standards.
What base types are available?
E27 and E26 bases are standard. Confirm the base type needed for your fixture.
Can I use this in enclosed fixtures?
Check the fixture rating. The bulb is not rated for fully enclosed fixtures unless specified.
What payment methods do you accept?
Different payment methods are accepted. Confirm the terms with the sales team when placing an order.
Request a Quote for Led Bulbs A60 10W/9W/7W/5W
Send the quantity, colour temperature and any customisation you need. Our sales team will confirm the configuration, lead time and price.