2KW Solar Power System Off Grid Kit for Home Use With Lithium/Lead Acid Battery Charging by Solar Panels



A 2KW off-grid kit for a small home with no reliable grid connection. It ships as a matched set: 6 pieces of 350W poly or mono solar modules, a 24V 80A MPPT or PWM charge controller, a 2KW 24Vdc off-grid inverter, and a 4-piece 12V 200Ah or 250Ah GEL or AGM battery bank, with the combiner box, mounting structure, cable, connectors and tool bag already included. The battery voltage, controller and inverter are chosen to work together, so the installer commissions the system instead of proving compatibility on site.
Values below are taken from the product documentation. Anything not listed is confirmed against your order.
| System Power | 2KW |
|---|---|
| Battery Voltage | 24Vdc |
| Solar Modules | 6 pieces 350W poly or mono |
| Charge Controller | 24V 80A MPPT or PWM |
| Battery Bank | 4 pieces 12V 200Ah or 250Ah GEL or AGM, adjustable |
| Combiner Box | 4 inputs 1 output with switches, breaker and SPD |
| PV Cable | 200 meters single-core 4mm2 and 6mm2 |
| Connectors | 5 pairs MC4, 30A 1000V compatible |
| Cable Rating | 600VDC UL or 1000VDC TUV, 55A and 70A |
| Module Warranty | 25 years at 80% power output |
| Mounting | Aluminium or galvanised steel, pitched roof, flat roof or ground |
| Tools | 1 bag with MC4 spanner, crimping pliers and wire stripper |
The packing list follows this table item by item.
| Item | Model | Description | Quantity |
|---|---|---|---|
| 1 | Solar Panels | Poly/Mono modules 350W Optional | 6 pieces |
| 2 | Combiner Box | 4-inputs 1-output(Switches, Breaker, SPD) | 1 piece |
| 3 | Charge controller | 24V 80A MPPT/PWM type | 1 piece |
| 4 | Battery | 12V 200Ah/250Ah GEL/AGM type(Adjustable) | 4 pieces |
| 5 | Off-grid Inverter | 2KW 24Vdc | 1 piece |
| 6 | Mounting Support | Aluminum/Galvanized steel; Customized; Pitched / flat roof, ground | 1 set |
| 7 | Cable | Single-core 4mm2 and 6mm2 PV cable | 200 meters |
| 8 | Connector | MC4 connector | 5 pairs |
| 9 | Tools Bag | 5 kinds of PV installation tools-MC4 spanner, Crimping pliers, wire stripper | 1 bag |
| Grid-tie solar system | Works with no grid present, but needs a battery bank that a grid-tie system does not |
|---|---|
| Solar hybrid energy system | Simpler and cheaper, but cannot fall back to the grid when the battery is low |
| Buying panels, inverter and battery separately | Fixed configuration and less freedom on brands, in exchange for a bus voltage that already matches |
| Diesel generator | No fuel logistics and no running noise, but the battery bank is replaced after around 15 years |
Size the daily load first, then confirm the 2KW inverter covers the largest starting load
Mount the array so all 6 modules share the same orientation and shading condition
Land the array on the combiner box before the controller, keeping the SPD earth bonded
Bring the battery bank to a matched state of charge before first commissioning
Keep the battery room ventilated and check bank voltage on a regular schedule

5kWh Solar Energy Storage System Off Grid Type for Home Use All-in-One Inverter + Hybrid Inverter Power by Sol
View product →
Grid-tie Type Warranty: 5-year/10-year PV Inverter Powered by Solar Panel, 25-year Warranty 10KW/20KW Complete
View product →
Off Grid/Stand-alone Type 3KW Complete Solar Power System One-Stop Power Supply Solution With Lithium/Lead Aci
View product →
10KW Complete Solar Energy System Off Grid Type With Lithium Battery / Lead Acid Battery Powered by Solar/Batt
View product →Yes. The standard configuration is 4 pieces of 12V 200Ah or 250Ah GEL or AGM battery, and the capacity is adjustable when you order.
A 4-input combiner box, 200 meters of 4mm2 and 6mm2 PV cable, 5 pairs of MC4 connectors, the mounting structure and a tool bag with MC4 spanner, crimping pliers and wire stripper.
Yes, the system supports both lithium LiFePO4 and lead-acid GEL/AGM batteries. Battery type must be specified to adjust controller and inverter settings accordingly.
The kit offers optional poly or mono blue/black panels with high efficiency and PERC technology, including PID-resistant panels with high salt and ammonia resistance.
Yes, the 2KW off-grid inverter supports both single-phase and three-phase output with input voltage ranging from 12V to 1000V.
The PV combiner box is rated for 1000VDC and 70A, with 4 inputs and 1 output, including switches, breaker, and SPD for surge protection.
Send your load list or drawing on WhatsApp or by email and an engineer will reply with pricing, the configuration and the packing details.