Black ESU Clamp for Patient Return Plate Cable PJ201-F01

Product Overview

It is supplied under part number TM-PJ201-F01. Standard housing colour is black. Warranty is 6 months.

This is the ESU clamp for patient return plate cable.

Problems It Solves

The return path of an electrosurgical unit is a safety item. A worn clamp that no longer grips the grounding pad is a burn risk, and it is a cheap part to replace before it becomes one.

For this item specifically: it keeps equipment already in service working rather than forcing a replacement of the whole device.

Who It Is For

This part suits distributors holding stock against a mixed monitor fleet.

• Operating theatre maintenance
• Biomedical engineering spares
• Distributor theatre kits

Specifications

Every figure below is taken from the product documentation for this item. Where a value is not published we mark it TBC rather than estimating it.

Model Numbers in This Series

Every variant below is a separate part number within the same series. Quote the code that matches the patient size and probe style you need.

Monitor Compatibility

This part is built for the monitors listed below, taken from our product documentation. A matching plug shape alone does not guarantee a matching signal, so confirm your exact model here before ordering.

Quality Control

This part is produced under our ISO 13485 quality management system with compliance to CE Mark and FDA regulations. It passes three inspection stages: IQC on the incoming connectors, wires, cables and terminals; IPQC through cutting, stripping, crimping, injection and assembly; and OQC on packing, labels, marks, appearance, dimensions and electrical performance before it is released.

Customisation Options

Connector, cable length and packaging can be quoted to your specification. Under our OEM and ODM service the product features, branding, packaging and labelling are customised, and we handle the regulatory documentation for your target market.

Comparison With the Alternatives

Compared with replacing the complete assembly, this part restores the equipment at a fraction of the cost and without a new qualification exercise.

Use Guide

1. Confirm the monitor manufacturer and model against the compatibility table above.
2. Check the connector on the monitor matches the connector stated in the specification table.
3. Choose the patient size and probe style from the model table, then quote that part number.
4. Apply the sensor to a clean, well-perfused site and keep the emitter and detector aligned opposite each other.
5. Rotate the measurement site regularly on long recordings to protect skin integrity.
6. Between patients, clean and disinfect reusable items under your own protocol; discard single-patient-use items.