Plastic Poly-V End Cap Shaft:12
The Plastic Poly-V End Cap Shaft:12 is a plastic end cap unit with a 12 mm shaft diameter, designed for use with 50 mm or 60 mm tube diameters. It features a precision 6002*2 bearing and is made from Nylon66. The unit is used to secure and support gravity rollers, sprocket rollers, and poly-V rollers in material handling systems. It is built for free running, quiet operation, and durability in washdown and industrial environments.
Product Overview
The Plastic Poly-V End Cap Shaft:12 is a plastic end cap unit with a 12 mm shaft diameter, designed for use with 50 mm or 60 mm tube diameters. It features a precision 6002*2 bearing and is made from Nylon66. The unit is used to secure and support gravity rollers, sprocket rollers, and poly-V rollers in material handling systems. It is built for free running, quiet operation, and durability in washdown and industrial environments.
Part of the Poly V Roller Bearings range, used in Warehouse and Distribution Centres.
Key Benefits
- Designed for 50 mm or 60 mm tube diameters with 12 mm shaft size
- Uses 6002*2 precision bearings for smooth, free running operation
- Nylon66 housing provides lightweight, corrosion-resistant performance
- Ideal for washdown and clean environments due to material choice
- Reduces noise and vibration in conveyor systems with quiet operation
Application Scenarios
- Gravity roller systems in warehouse loading and unloading zones
- Assembly lines using poly-V rollers for medium to heavy weight conveying
- Mould manufacturing lines where clean, quiet operation is required
- Electrical parts manufacturing where plastic components prevent electrical interference
- Lightweight and medium weight conveying systems in industrial production
Who It Is For
- Conveyor system integrators building gravity roller lines
- Material handling equipment builders using poly-V and sprocket rollers
- Industrial distributors stocking end caps by shaft and tube size
- Manufacturers of roller conveyors requiring consistent end cap fit
- Production line builders needing washdown-compatible components
Problems It Solves
- Mismatched end caps that do not fit standard tube diameters or shaft sizes
- Noisy or binding roller ends due to poor bearing fit or material wear
- Corrosion or degradation in washdown environments from metal or low-grade plastic
- Inconsistent roller performance when end caps are not precision-engineered
- Difficulty sourcing a single supplier for end caps that match tube and shaft dimensions
Technical Features
- Precision 6002*2 bearing integrated into the end cap for smooth rotation
- Shaft diameter of 12 mm compatible with standard roller shafts
- Available for 50 mm or 60 mm tube diameters with matching bore sizes
- Nylon66 housing resists wear and moisture in industrial environments
- End cap designed to be pressed or secured into the roller tube end
Materials
- Nylon66 housing for wear resistance and low noise
- 6002*2 precision bearing for smooth, long-life rotation
- Compatible with steel, stainless, and PVC tubes
Quality Control
- Bearing rotation checked by hand for free movement
- Shaft diameter verified against 12 mm specification
- Tube diameter compatibility tested with 50 mm and 60 mm tubes
- Material grade confirmed as Nylon66 before packing
Customization Options
- Special bore sizes available upon request for large volume orders
- Alternative materials may be considered for high-load or high-temperature applications
- End cap design can be adjusted to match specific roller tube profiles
Use Guide
- Ensure the tube diameter matches either 50 mm or 60 mm before installation
- Verify the shaft diameter is 12 mm to match the end cap bore
- Press the end cap firmly into the roller tube end until seated
- Check rotation by hand to confirm smooth, free movement
- Use in washdown environments where moisture resistance is required
Specifications
| Model No | Plastic Poly-V End Cap Shaft:12 |
|---|---|
| Tube Diameter | 50 mm or 60 mm |
| Shaft Diameter | 12 mm |
| Bearing Type | 6002*2 |
| Material | Nylon66 |
| Mounting | Press fit into tube end |
| Application | Gravity roller, sprocket roller, poly-V roller |
Product Images
Manufacturing Process
Step 1
Molding of the Nylon66 end cap housing
Step 2
Insertion and alignment of the 6002*2 bearing
Step 3
Press fitting of the end cap into the roller tube
Step 4
Final inspection of shaft alignment and rotation
Compared With Other Options
| Metal end caps | Nylon66 end caps reduce noise and prevent marking on painted or polished surfaces |
|---|---|
| Standard plastic end caps | This unit uses a precision 6002*2 bearing for longer life and smoother operation |
| Press fit units without bearings | Integrated bearing ensures consistent rotation and reduces wear on the shaft |
Plastic Poly-V End Cap Shaft:12 Questions
What tube diameters is this end cap compatible with?
It is designed for 50 mm or 60 mm tube diameters.
What is the shaft diameter of this end cap?
The shaft diameter is 12 mm.
What bearing is used in this end cap?
It uses a 6002*2 precision bearing.
Is the housing made of plastic or metal?
The housing is made of Nylon66 plastic.
Can this end cap be used in washdown environments?
Yes, the Nylon66 material and bearing design make it suitable for washdown and clean environments.
Are special bore sizes available?
Yes, special bore sizes can be customized for large volume orders.
Get a Price for Plastic Poly-V End Cap Shaft:12
Send the quantity and any material or surface option you need, and a quotation comes back against this model number.