Plastic O-Belt End Cap Shaft:15
The Plastic O-Belt End Cap Shaft:15 is a plastic housing unit with a precision bearing, designed for use on steel, stainless steel, or PVC tubes with diameters of 50 mm or 60 mm. It features a 15 mm shaft diameter and is made from Nylon66. The unit is integrated with a 6804*2 bearing and is intended for gravity roller applications requiring quiet, free-running operation in light to medium load environments.
Product Overview
The Plastic O-Belt End Cap Shaft:15 is a plastic housing unit with a precision bearing, designed for use on steel, stainless steel, or PVC tubes with diameters of 50 mm or 60 mm. It features a 15 mm shaft diameter and is made from Nylon66. The unit is integrated with a 6804*2 bearing and is intended for gravity roller applications requiring quiet, free-running operation in light to medium load environments.
Part of the O Belt Roller Bearings range, used in Warehouse and Distribution Centres.
Key Benefits
- Designed for 50 mm or 60 mm tube diameters with a 15 mm shaft for consistent fit
- Nylon66 housing provides corrosion resistance and quiet operation
- Integrated 6804*2 precision bearing ensures smooth, free-running performance
- Suitable for washdown and clean environments due to plastic construction
- Reduces friction and wear on tube surfaces during rotation
Application Scenarios
- Gravity roller systems in light to medium weight conveying lines
- Assembly lines where quiet operation is required near workstations
- Mould manufacturing and electrical parts handling with sensitive components
- Warehouse loading and unloading points using plastic roller bearings
- Conveyor sections requiring low maintenance and resistance to moisture
Who It Is For
- Conveyor system integrators building gravity roller lines
- Material handling equipment builders using plastic roller bearings
- Industrial distributors stocking end caps by tube and shaft size
- Manufacturers of light to medium weight conveyors in clean or wet areas
- Production line builders needing consistent roller end cap fit
Problems It Solves
- Mismatched end caps that do not fit standard tube diameters of 50 mm or 60 mm
- Noisy or binding rollers due to poor bearing alignment or housing material
- Corrosion or wear on metal housings in washdown or humid environments
- Inconsistent shaft fit that causes roller misalignment or premature bearing failure
- Need for a single supplier for end caps that match tube size, shaft size and bearing type
Technical Features
- Plastic housing made from Nylon66 for durability and low friction
- Integrated 6804*2 precision bearing for smooth rotation
- Shaft diameter of 15 mm to match standard roller shafts
- Available for 50 mm or 60 mm tube diameters with matching bore sizes
- Designed for free-running operation with minimal effort under load
Materials
- Nylon66 housing for resistance to moisture, chemicals and wear
- 6804*2 precision bearing for smooth, low-friction rotation
- Plastic construction suitable for washdown and clean environments
- No metal-to-metal contact between housing and shaft to reduce noise
Quality Control
- Bore size verified against 50 mm or 60 mm tube requirements
- Shaft fit checked for smooth rotation without binding
- Bearing alignment confirmed to prevent wobble or noise
- Material grade of Nylon66 confirmed against specification
Customization Options
- Special bore sizes available upon request for large volume orders
- Alternative bearing types may be considered for high load or high speed applications
- Custom shaft diameter options possible with sufficient order volume
Use Guide
- Verify tube diameter is 50 mm or 60 mm before selecting this end cap
- Ensure shaft diameter is 15 mm to match the bore size
- Check that the bearing rotates freely before mounting on the roller
- Use in environments where moisture or washdown is present to benefit from plastic housing
- Avoid overloading beyond the design load of the roller system
Specifications
| Model No | Plastic O-Belt End House Shaft:15 |
|---|---|
| Tube Diameter | 50 mm or 60 mm |
| Shaft Diameter | 15 mm |
| Bearing Type | 6804*2 |
| Housing Material | Nylon66 |
| Bore Size | ⌀47 mm (for 50 mm tube) or ⌀60 mm (for 60 mm tube) |
| Mounting Type | End cap with shaft fit |
Product Images
Manufacturing Process
Step 1
Molding of Nylon66 housing to precise bore and flange dimensions
Step 2
Insertion and alignment of 6804*2 bearing into the housing
Step 3
Shaft fitting and inspection for smooth rotation
Step 4
Final assembly and visual inspection before packing
Compared With Other Options
| Metal end caps | Plastic housing reduces noise and protects tube surfaces, but may have lower load capacity than metal |
|---|---|
| Standard plastic roller bearings | This unit is specifically designed for O-belt rollers with 15 mm shafts and 50/60 mm tubes, not interchangeable with general roller bearings |
| Pressed-in end caps | This unit is a separate end cap with a shaft fit, allowing easier replacement than pressed-in types |
Related Products
Plastic O-Belt End Cap Shaft:15 Questions
What tube diameters does this end cap fit?
It fits 50 mm or 60 mm tubes with matching bore sizes of ⌀47 mm or ⌀60 mm respectively.
What is the shaft diameter?
The shaft diameter is 15 mm, designed to fit standard roller shafts.
What material is the housing made from?
The housing is made from Nylon66, which provides durability and resistance to moisture and wear.
Is the bearing replaceable?
The 6804*2 bearing is integrated into the housing and not designed for field replacement.
Can I get a different bore size?
Yes, special bore sizes are available for large volume orders upon request.
Is this suitable for washdown applications?
Yes, the Nylon66 housing and plastic construction make it suitable for clean or wet environments.
Get a Price for Plastic O-Belt End Cap Shaft:15
Send the quantity and any material or surface option you need, and a quotation comes back against this model number.