Plastic O-Belt End Cap Shaft:12
The Plastic O-Belt End Cap Shaft:12 is a plastic end cap designed for O-belt rollers with tube diameters of 50 mm or 60 mm and a shaft diameter of 12 mm. It features a precision bearing housed in a nylon66 body, engineered for smooth, quiet operation on steel, stainless steel, or PVC tubes. The unit is built for gravity roller applications where consistent rotation and low friction are required under medium to heavy loads.
Product Overview
The Plastic O-Belt End Cap Shaft:12 is a plastic end cap designed for O-belt rollers with tube diameters of 50 mm or 60 mm and a shaft diameter of 12 mm. It features a precision bearing housed in a nylon66 body, engineered for smooth, quiet operation on steel, stainless steel, or PVC tubes. The unit is built for gravity roller applications where consistent rotation and low friction are required under medium to heavy loads.
Part of the O Belt Roller Bearings range, used in Warehouse and Distribution Centres.
Key Benefits
- Designed for 50 mm or 60 mm tube diameters with 12 mm shaft size
- Nylon66 housing resists wear and operates quietly under load
- Precision 6002*2 bearings ensure free rotation and long service life
- Suitable for washdown and clean environments due to plastic construction
- Integrated bearing reduces maintenance and supports consistent roller performance
Application Scenarios
- Gravity roller conveyors in light to medium weight manufacturing lines
- Assembly lines where smooth, quiet product transfer is required
- Warehouse loading and unloading stations with frequent handling
- Mould and electrical parts manufacturing where vibration and noise must be minimized
- PVC or stainless steel tube systems in food or pharmaceutical handling
Who It Is For
- Conveyor system integrators building gravity roller lines
- Material handling equipment builders using O-belt rollers
- Industrial distributors sourcing plastic roller end caps in volume
- Production line engineers replacing worn or noisy end caps
- Warehouse automation contractors specifying low-maintenance components
Problems It Solves
- End caps that bind or seize on steel or PVC tubes due to poor fit or material mismatch
- Noise and vibration from loose or poorly supported roller bearings
- Frequent replacement of end caps due to material degradation in washdown areas
- Inconsistent roller rotation caused by misaligned or low-quality bearings
- Difficulty sourcing end caps that match both tube diameter and shaft size
Technical Features
- Housing made from nylon66 for durability and low friction
- Precision 6002*2 bearings integrated into the end cap for smooth rotation
- Available for 50 mm or 60 mm tube diameters with 12 mm shaft
- Pre-drilled bore for direct mounting on standard roller shafts
- Designed for gravity roller applications with consistent load transfer
Materials
- Nylon66 housing for resistance to wear, moisture and moderate loads
- Steel shaft for compatibility with standard roller shafts
- Precision 6002*2 ball bearings for low friction and long life
Quality Control
- Bearing rotation tested by hand for free movement
- Housing bore checked against 12 mm shaft tolerance
- Material grade verified against nylon66 specification
- Tube diameter compatibility confirmed for 50 mm and 60 mm
Customization Options
- Special bore sizes available for high volume orders
- Alternative materials can be discussed based on application requirements
- Custom packaging options available for bulk shipments
Use Guide
- Confirm tube diameter is 50 mm or 60 mm before ordering
- Ensure shaft diameter is 12 mm to match the end cap bore
- Install with the bearing aligned to the shaft to avoid binding
- Use in gravity roller applications where consistent rotation is needed
- Inspect for wear or misalignment during routine maintenance
Specifications
| Model No | Plastic O-Belt End Cap Shaft:12 |
|---|---|
| Tube Diameter | 50 mm or 60 mm |
| Shaft Diameter | 12 mm |
| Bearing Type | 6002*2 |
| Housing Material | Nylon66 |
| Mounting Type | Integrated with roller shaft |
| Application | Gravity roller, O-belt roller |
Product Images
Manufacturing Process
Step 1
Injection molding of nylon66 housing with precision bore
Step 2
Insertion and alignment of 6002*2 bearings
Step 3
Shaft fitting and final inspection of rotation
Step 4
Packaging for shipment and storage
Compared With Other Options
| Metal end caps | Plastic end caps reduce noise and protect tube surfaces, but may have lower load capacity than metal |
|---|---|
| Standard plastic end caps without precision bearings | This unit includes a 6002*2 bearing for consistent rotation, unlike basic plastic caps |
| Pressed-in plastic caps | This unit is designed with a precision bore and integrated bearing, ensuring better alignment and longer life |
Related Products
Plastic O-Belt End Cap Shaft:12 Questions
What tube diameters does this end cap fit?
It is designed for 50 mm or 60 mm tube diameters.
What is the shaft size for this end cap?
The shaft diameter is 12 mm.
What type of bearing is used?
It uses a 6002*2 precision ball bearing.
Is the housing made of plastic?
Yes, the housing is made from nylon66 plastic.
Can I get custom bore sizes?
Yes, special bore sizes are available for high volume orders.
Is this suitable for washdown environments?
Yes, the nylon66 housing and sealed bearing make it suitable for washdown and clean areas.
Get a Price for Plastic O-Belt End Cap Shaft:12
Send the quantity and any material or surface option you need, and a quotation comes back against this model number.