Plastic Double Sprocket End Cap for Sprocket type:08B14T-Shaft:15
The Plastic Double Sprocket End Cap for Sprocket type 08B14T and Shaft ⌀15 is a precision-machined plastic end cap designed to fit over a double sprocket roller with a 08B14T sprocket and a 15 mm shaft. It is made from Nylon66 and is available in multiple thickness variants including 1.2 mm, 1.5 mm, and 2.0 mm, with corresponding outer and inner diameters to match standard tube sizes. The end cap integrates two 6804*2 bearings and is used to secure the sprocket assembly on a roller shaft, ensuring smooth rotation and alignment in gravity and powered roller conveyors.
Product Overview
The Plastic Double Sprocket End Cap for Sprocket type 08B14T and Shaft ⌀15 is a precision-machined plastic end cap designed to fit over a double sprocket roller with a 08B14T sprocket and a 15 mm shaft. It is made from Nylon66 and is available in multiple thickness variants including 1.2 mm, 1.5 mm, and 2.0 mm, with corresponding outer and inner diameters to match standard tube sizes. The end cap integrates two 6804*2 bearings and is used to secure the sprocket assembly on a roller shaft, ensuring smooth rotation and alignment in gravity and powered roller conveyors.
Part of the Double Sprocket Roller Bearings range, used in Warehouse and Distribution Centres.
Key Benefits
- Nylon66 material resists wear and provides quiet operation in conveyor systems
- Precision fit to 08B14T sprocket and ⌀15 shaft ensures correct alignment
- Available in multiple thicknesses to match different tube wall thicknesses
- Housing designed for steel, stainless, or PVC tubes used in material handling
- Integrated 6804*2 bearings allow free rotation with low friction
Application Scenarios
- Gravity roller conveyors in packaging lines where sprockets drive product movement
- Assembly line transfer sections using double sprocket rollers for synchronized motion
- Washdown environments in food or pharmaceutical manufacturing where metal parts are avoided
- Light-duty powered roller conveyors using sprocket-driven roller tracks
- Conveyor systems requiring non-marking, low-noise components in clean or sensitive areas
Who It Is For
- Conveyor system integrators building gravity or powered roller lines
- Material handling equipment builders using double sprocket rollers
- Industrial distributors stocking sprocket end caps by shaft and sprocket type
- Manufacturers of roller tracks and roller wheels needing consistent end caps
- Production line builders requiring components that match existing tube and shaft dimensions
Problems It Solves
- Mismatched end caps that cause misalignment or binding in sprocket roller assemblies
- Noise and vibration from loose or poorly fitting end caps on rotating rollers
- Corrosion or contamination risks from metal end caps in washdown or food-grade environments
- Inconsistent roller performance due to poor bearing retention or housing deformation
- Need for multiple suppliers to source end caps, shafts, and bearings separately
Technical Features
- Double sprocket end cap with integrated 6804*2 bearings for smooth rotation
- Nylon66 housing resists wear and operates quietly under load
- Available in multiple thicknesses: 1.2 mm, 1.5 mm, and 2.0 mm for different tube wall thicknesses
- Designed to fit 08B14T sprocket and ⌀15 shaft with precise bore and outer diameter
- Housing matches standard tube sizes including ⌀50, ⌀50.6, and ⌀50.8
Materials
- Nylon66 housing for wear resistance and quiet operation
- Steel shaft and sprocket assembly with plastic end cap for corrosion resistance
- Compatible with steel, stainless steel, and PVC tubes in industrial and washdown environments
Quality Control
- Bearing rotation checked by hand for free movement and no binding
- Outer and inner diameters verified against specified tube and shaft sizes
- Material grade confirmed as Nylon66 for each batch
- End cap thickness measured to match the ordered variant
- Final inspection ensures no cracks or warping in the plastic housing
Customization Options
- Special bore sizes available upon request for large volume orders
- Different thicknesses available to match specific tube wall thicknesses
- Alternative materials may be considered for high-load or high-temperature applications
- Custom labeling or packaging available for bulk orders
- End caps can be supplied with or without pre-assembled sprockets
Use Guide
- Verify that the shaft diameter is ⌀15 mm and the sprocket is 08B14T before ordering
- Select the correct thickness (1.2 mm, 1.5 mm, or 2.0 mm) based on the tube wall thickness
- Ensure the tube outer diameter (⌀50, ⌀50.6, or ⌀50.8 mm) matches the end cap specification
- Install the end cap with the bearings facing the correct direction for sprocket alignment
- Use in environments where temperatures remain within the operating range of Nylon66
Specifications
| Model No | Plastic Double Sprocket End Cap for Sprocket type 08B14T-Shaft:15 |
|---|---|
| Sprocket Type | 08B14T |
| Shaft Diameter | ⌀15 mm |
| Material | Nylon66 |
| Housing Thickness | 1.2 mm, 1.5 mm, 2.0 mm |
| Outer Diameter | ⌀50, ⌀50.6, ⌀50.8 mm |
| Inner Diameter | ⌀46 to ⌀48.4 mm |
| Bearing Type | 6804*2 |
| Tube Size Compatibility | Steel, stainless, PVC tubes |
| Application | Gravity and powered roller conveyors |
Product Images
Manufacturing Process
Step 1
Machining of Nylon66 housing to precise outer and inner diameters
Step 2
Insertion of 6804*2 precision bearings into the housing
Step 3
Assembly of the end cap onto the sprocket and shaft
Step 4
Final inspection for bearing rotation and housing fit
Step 5
Packing for shipment based on order quantity
Compared With Other Options
| Metal end caps | Nylon66 end caps reduce noise and prevent marking on sensitive surfaces, while metal caps are stronger but noisier and prone to corrosion |
|---|---|
| Single sprocket end caps | Double sprocket end caps allow for symmetrical mounting and better load distribution on dual sprocket rollers |
| Pressed-in plastic end caps | This design uses a precision-machined housing with integrated bearings, offering better alignment and longer life than pressed-in types |
Plastic Double Sprocket End Cap for Sprocket type:08B14T-Shaft:15 Questions
What is the shaft size for this end cap?
The shaft size is ⌀15 mm, designed to fit a 15 mm shaft with an 08B14T sprocket.
What material is used in the end cap?
The end cap is made from Nylon66, which provides wear resistance and quiet operation.
Are there different thickness options?
Yes, the end cap is available in 1.2 mm, 1.5 mm, and 2.0 mm thicknesses to match different tube wall thicknesses.
Can it be used on PVC tubes?
Yes, the end cap is compatible with steel, stainless steel, and PVC tubes.
Is the bearing included?
Yes, the end cap integrates two 6804*2 precision bearings.
Can custom bore sizes be made?
Yes, special bore sizes are available for large volume orders upon request.
Get a Price for Plastic Double Sprocket End Cap for Sprocket type:08B14T-Shaft:15
Send the quantity and any material or surface option you need, and a quotation comes back against this model number.