Double Sprocket Plastic End Cap for Sprocket type:08B14T-Shaft:12
The Double Sprocket Plastic End Cap for Sprocket Type 08B14T with Shaft Ø12 is a precision-machined plastic housing designed to fit over the ends of a double sprocket roller. It supports a 6804*2 bearing and is made from Nylon66. The cap fits tubes with diameters ranging from Ø46 to Ø50.8 mm and is available in multiple thicknesses: 1.2 mm, 1.5 mm, and 2.0 mm. It is intended for use in gravity, sprocket, and O-belt roller systems where quiet operation and resistance to washdown conditions are required.
Product Overview
The Double Sprocket Plastic End Cap for Sprocket Type 08B14T with Shaft Ø12 is a precision-machined plastic housing designed to fit over the ends of a double sprocket roller. It supports a 6804*2 bearing and is made from Nylon66. The cap fits tubes with diameters ranging from Ø46 to Ø50.8 mm and is available in multiple thicknesses: 1.2 mm, 1.5 mm, and 2.0 mm. It is intended for use in gravity, sprocket, and O-belt roller systems where quiet operation and resistance to washdown conditions are required.
Part of the Double Sprocket Roller Bearings range, used in Warehouse and Distribution Centres.
Key Benefits
- Fits sprocket type 08B14T with shaft Ø12 for consistent roller end alignment
- Made from Nylon66 for wear resistance and low noise in continuous operation
- Available in multiple thicknesses to match different tube wall thicknesses
- Housing designed to accept 6804*2 precision bearings for smooth rotation
- Suitable for use with steel, stainless steel, and PVC tubes in industrial handling lines
Application Scenarios
- Gravity roller conveyors in packaging lines where quiet operation is required
- Sprocket roller systems in assembly lines with frequent start-stop cycles
- O-belt roller conveyors in cleanroom or washdown environments
- Conveyor sections where plastic end caps prevent tube damage from bearing contact
- Roller systems integrated into material handling equipment requiring low maintenance
Who It Is For
- Conveyor system integrators building gravity and sprocket roller lines
- Material handling equipment builders using plastic roller bearings in standard configurations
- Industrial distributors stocking end caps for common sprocket roller types
- Production line builders needing consistent roller end caps for high-volume assembly
Problems It Solves
- Inconsistent end cap fit on double sprocket rollers leading to bearing misalignment
- Metal end caps causing noise and wear on PVC or stainless steel tubes
- Lack of washdown-resistant end caps in food or pharmaceutical handling systems
- Difficulty sourcing a single supplier for matched end caps and bearing assemblies
- Roller ends that degrade or crack under repeated loading and impact
Technical Features
- Precision-machined plastic housing with consistent internal diameter
- Housing thickness options: 1.2 mm, 1.5 mm, and 2.0 mm to match tube wall thickness
- Internal bore designed to fit 6804*2 bearings with no clearance or play
- Outer diameter matches standard tube sizes from Ø46 to Ø50.8 mm
- Nylon66 material provides resistance to moisture, chemicals, and impact
Materials
- Nylon66 housing for resistance to moisture, abrasion, and impact
- Compatible with steel, stainless steel, and PVC tubes
- Non-marking surface that protects tube finishes during handling
Quality Control
- Internal bore checked for dimensional consistency across production batches
- Fit test performed with 6804*2 bearing to ensure free rotation
- Visual inspection for flash, cracks, or warping in the plastic housing
- Material grade verified against Nylon66 specification
Customization Options
- Special bore sizes available upon request for large volume orders
- Different thicknesses available to match specific tube wall thicknesses
- Alternative materials can be considered for high-temperature or chemical exposure
Use Guide
- Verify tube diameter matches the range Ø46 - Ø50.8 mm before installation
- Ensure the 6804*2 bearing is fully seated in the cap before mounting
- Press the cap onto the roller end until it is flush with the sprocket face
- Use only the thickness option that matches your tube wall thickness
- Avoid over-tightening during installation to prevent housing deformation
Specifications
| Model No | Double Sprocket Plastic End Cap for Sprocket Type 08B14T-Shaft 12 |
|---|---|
| Sprocket Type | 08B14T |
| Shaft Diameter | Ø12 |
| Tube Diameter Range | Ø46 - Ø50.8 mm |
| Housing Thickness | 1.2 mm, 1.5 mm, 2.0 mm |
| Bearing Type | 6804*2 |
| Material | Nylon66 |
| Mounting | Press fit over roller end |
Product Images
Manufacturing Process
Step 1
Molding of Nylon66 end cap with precise internal and external dimensions
Step 2
Machining of internal bore to match 6804*2 bearing tolerance
Step 3
Inspection of fit against specified tube diameter and shaft size
Step 4
Final assembly with bearing and packaging for shipment
Compared With Other Options
| Metal end caps | Plastic end caps reduce noise and protect tube surfaces from marking or wear |
|---|---|
| Standard plastic end caps without bearing support | This unit integrates a 6804*2 bearing for consistent rotation and load support |
| Single sprocket end caps | Designed for double sprocket rollers, ensuring both ends are matched and aligned |
Double Sprocket Plastic End Cap for Sprocket type:08B14T-Shaft:12 Questions
What sprocket type does this end cap fit?
It is designed for sprocket type 08B14T with a shaft diameter of Ø12.
What tube diameters are compatible?
The cap fits tubes with outer diameters from Ø46 mm to Ø50.8 mm.
What bearing is used inside the end cap?
It is designed to hold a 6804*2 precision bearing.
Is the material resistant to washdown?
Yes, the Nylon66 material is suitable for washdown and wet environments.
Are different thicknesses available?
Yes, the cap is available in 1.2 mm, 1.5 mm, and 2.0 mm thicknesses.
Can I get custom bore sizes?
Yes, special bore sizes are available for large volume orders.
Get a Price for Double Sprocket Plastic End Cap for Sprocket type:08B14T-Shaft:12
Send the quantity and any material or surface option you need, and a quotation comes back against this model number.