grooved rubber coating motorized roller with v pulley
The DG60-AS-3PH380V-265L-10M-J-V is a grooved rubber coated motorized roller with V pulley, 60 mm diameter, 1.5 mm tube thickness, 265 mm tube face, rated at 10 meters per minute, powered by a 30W three-phase 380V motor. It is designed for use in conveyor systems requiring consistent drive force and controlled product movement. The roller features a rubber coating for grip and a V pulley for belt-driven power transfer. It is available in galvanized, chrome plated, or rubber-coated tube materials. The unit is suitable for standard, short, accumulation or high torque configurations depending on the model suffix.
Product Overview
The DG60-AS-3PH380V-265L-10M-J-V is a grooved rubber coated motorized roller with V pulley, 60 mm diameter, 1.5 mm tube thickness, 265 mm tube face, rated at 10 meters per minute, powered by a 30W three-phase 380V motor. It is designed for use in conveyor systems requiring consistent drive force and controlled product movement. The roller features a rubber coating for grip and a V pulley for belt-driven power transfer. It is available in galvanized, chrome plated, or rubber-coated tube materials. The unit is suitable for standard, short, accumulation or high torque configurations depending on the model suffix.
Part of the Motor Roller range, used in Warehouse and Distribution Centres.
Key Benefits
- Grooved rubber coating provides consistent grip and prevents slippage on packaged goods
- V pulley enables belt-driven power transfer with stable speed and torque
- 30W three-phase 380V motor delivers reliable drive force for continuous operation
- 265 mm tube face allows for extended product contact and stable load handling
- 60 mm diameter with 1.5 mm tube thickness offers robust mechanical strength
- Available in multiple tube materials to suit different environmental conditions
Application Scenarios
- Conveyor lines in packaging facilities where product must move without slipping on curved or inclined sections
- Assembly lines requiring precise, controlled movement of components with consistent speed
- Material handling systems where a belt-driven motor roller is needed to drive a chain or belt
- Accumulation zones where products are held and released in sequence using a controlled drive
- Industrial lines where a high torque version is needed for heavier or sticky loads
Who It Is For
- Conveyor system integrators building motorized roller conveyors with belt-driven power transfer
- Material handling equipment builders requiring consistent drive force and grip
- Warehouse automation contractors installing conveyors with controlled product flow
- Production line builders needing a reliable motor roller for accumulation or standard drive
- Industrial distributors stocking motorized rollers by drive voltage and load capacity
Problems It Solves
- Product slippage on rollers due to smooth or low-friction surfaces
- Inconsistent drive speed or torque in belt-driven conveyor sections
- Need for a motor roller that matches a specific tube diameter and drive voltage
- Lack of a single-source solution for motor rollers with rubber coating and V pulley
- Difficulty in integrating a motor roller into a system that uses belt-driven power transfer
Technical Features
- 60 mm diameter with 1.5 mm tube thickness for structural rigidity and consistent mounting
- 265 mm tube face provides extended contact length for stable product handling
- 30W three-phase 380V motor rated for continuous operation at 10 meters per minute
- Grooved rubber coating improves grip on packaged goods and reduces slippage
- V pulley enables belt-driven power transfer with stable speed and torque
- Model suffixes allow selection between standard, short, accumulation, and high torque types
Materials
- Galvanized tube for general industrial environments with moderate corrosion resistance
- Chrome plated tube for improved wear resistance and surface hardness
- NR (Natural Rubber) coating for grip and impact absorption on standard loads
- PU (Polyurethane) coating for higher wear resistance and longer service life
- SUS304 and SUS201 stainless steel tubes for wet, washdown or corrosive environments
Quality Control
- Motor output checked against 30W rating under load
- Pulley alignment verified to ensure belt tracking and no slippage
- Coating thickness and groove pattern inspected for consistency
- Electrical insulation tested to prevent short circuits
- Motor rotation checked for free movement and correct direction
Customization Options
- Tube material selected between galvanized, chrome plated, rubber coated, PU coated, SUS304, or SUS201
- Coating type selected between grooved rubber, PU, or other options based on application
- Pulley type selected between V pulley, poly V pulley, sprocket, timing pulley, O groove, or brake
- Length available from 200 mm to 1500 mm, with custom sizes possible
- Other diameters available including 50, 57, 76 mm, and larger sizes on request
Use Guide
- Ensure the conveyor frame supports the roller's 60 mm diameter and 1.5 mm tube thickness
- Verify that the 380V three-phase power supply is available at the installation point
- Use the grooved rubber coating for products that require grip and to prevent slippage
- Match the V pulley to the belt type and tension requirements of the system
- Select the appropriate tube material based on environmental conditions such as moisture or abrasion
Specifications
| Model No | DG60-AS-3PH380V-265L-10M-J-V |
|---|---|
| Diameter | 60 mm |
| Tube Thickness | 1.5 mm |
| Tube Face | 265 mm |
| Rated Speed | 10 M/Min |
| Power Supply | Three Phase 380V |
| Motor Power | 30W |
| Coating | Grooved Rubber |
| Pulley Type | V Pulley |
| Type | Standard Type (AS) |
Manufacturing Process
Step 1
Tube forming and welding to specified diameter and thickness
Step 2
Coating application with grooved rubber on the outer surface
Step 3
Motor and pulley assembly with alignment to the tube axis
Step 4
Electrical wiring and terminal connection for three-phase 380V input
Step 5
Final inspection for coating integrity, pulley alignment, and motor function
Compared With Other Options
| Plain roller with external motor | This motor roller integrates the motor and drive into the roller body, reducing space and simplifying installation |
|---|---|
| Single phase motor roller | Three-phase 380V provides more consistent torque and better performance under load compared to single phase |
| Smooth coated motor roller | Grooved rubber coating improves grip and prevents slippage on packaged goods |
| Timing pulley version | V pulley is better suited for belt-driven systems with higher speed and lower tension requirements |
| Standard motor roller without pulley | This model includes a V pulley for direct belt drive, eliminating the need for additional drive components |
grooved rubber coating motorized roller with v pulley Questions
What is the rated speed of this motor roller?
The rated speed is 10 meters per minute.
What power supply does it require?
It requires a three-phase 380V power supply.
Can I get a different tube material?
Yes, tube materials include galvanized, chrome plated, NR coating, PU coating, SUS304, and SUS201.
Is the rubber coating grooved?
Yes, the coating is grooved to improve grip and prevent slippage on packaged goods.
Can I get a different pulley type?
Yes, options include V pulley, poly V pulley, sprocket, timing pulley, O groove, or brake.
What is the tube face length?
The tube face is 265 mm.
Can I order a custom length?
Yes, lengths from 200 mm to 1500 mm are available, with larger sizes possible on request.
Get a Price for grooved rubber coating motorized roller with v pulley
Send the quantity and any material or surface option you need, and a quotation comes back against this model number.