Double Sprocket Plastic Taper Sleeve Roller
The Double Sprocket Plastic Taper Sleeve Roller Model No. 06L2R5615/D2-12 is a precision bearing roller with a nylon and PP bearing house, designed for use with a steel tube. It has a 50 mm outer diameter, 1.5 mm sleeve thickness, and a 12 mm shaft diameter. The taper degree is 3.6, with a small end diameter of 56 mm and a big end diameter of D2. The roller features an 8*12 pitch 08B14T sprocket and is suitable for conveyor lines requiring precise alignment and low friction.
Product Overview
The Double Sprocket Plastic Taper Sleeve Roller Model No. 06L2R5615/D2-12 is a precision bearing roller with a nylon and PP bearing house, designed for use with a steel tube. It has a 50 mm outer diameter, 1.5 mm sleeve thickness, and a 12 mm shaft diameter. The taper degree is 3.6, with a small end diameter of 56 mm and a big end diameter of D2. The roller features an 8*12 pitch 08B14T sprocket and is suitable for conveyor lines requiring precise alignment and low friction.
Part of the Roller range, used in Warehouse and Distribution Centres.
Key Benefits
- Precision bearing with nylon and PP housing reduces friction and wear
- Taper sleeve design allows for secure fit on a 12 mm shaft
- Steel tube material ensures strength and durability under load
- 8*12 pitch 08B14T sprocket matches standard chain drive systems
- Taper degree of 3.6 ensures even load distribution across the roller surface
Application Scenarios
- Conveyor lines where chain-driven sprockets require precise alignment with the roller
- Assembly lines using chain drives for product transfer between stations
- Material handling systems with high-speed chain drives needing low-friction rollers
- Light to medium load applications where a tapered sleeve roller maintains alignment
- Systems requiring a roller that fits directly onto a 12 mm shaft with a taper fit
Who It Is For
- Conveyor system integrators building chain-driven roller conveyors
- Material handling equipment builders needing precision sprocket rollers
- Industrial distributors stocking chain drive components by sprocket type
- Production line builders integrating sprocket-driven transfer points
Problems It Solves
- Misalignment between chain and roller due to loose or non-tapered fit
- Excessive wear on sprockets and rollers from poor bearing support
- Need for a roller that fits a 12 mm shaft with a secure taper connection
- Lack of standard sprocket compatibility in plastic sleeve rollers
- Inconsistent performance when using non-precision bearing rollers in chain drives
Technical Features
- Precision bearing with nylon and PP housing for low friction and wear resistance
- Taper sleeve design with 3.6 degree taper for secure fit on 12 mm shaft
- Steel tube material provides structural strength and load support
- 8*12 pitch 08B14T sprocket ensures compatibility with standard chain drives
- Small end diameter of 56 mm and big end diameter D2 for consistent roller profile
Materials
- Nylon and PP bearing house for low friction and wear resistance
- Steel tube for structural strength and load capacity
- Precision bearing with nylon and PP housing for consistent performance
Quality Control
- Taper fit verified against 3.6 degree specification
- Sprocket pitch checked against 8*12 standard
- Shaft diameter confirmed as 12 mm
- Outer diameter measured at 50 mm
- Sleeve thickness verified at 1.5 mm
Customization Options
- Sprocket type available in 08B14T for standard chain drive compatibility
- Taper degree fixed at 3.6, not adjustable
- Outer diameter and length based on model 06L2R5615/D2-12
- Tube material fixed as steel
- Bearing house material fixed as nylon and PP
Use Guide
- Ensure the 12 mm shaft matches the taper sleeve for secure fit
- Verify the 8*12 pitch sprocket aligns with the chain used in the system
- Check that the small end diameter of 56 mm and big end diameter D2 match the conveyor deck profile
- Use only on steel tubes as specified to maintain structural integrity
- Avoid overloading beyond the roller's intended load capacity
Specifications
| Model No | 06L2R5615/D2-12 |
|---|---|
| Outer Diameter | ø50 mm |
| Sleeve Thickness | 1.5 mm |
| Shaft Diameter | ø12 mm |
| Taper Degree | 3.6 |
| Small End Diameter | 56 mm |
| Big End Diameter | D2 |
| Length | L |
| Sprocket Type | 08B14T |
| Sprocket Pitch | 8*12 |
| Tube Material | Steel |
Manufacturing Process
Step 1
Machining of the steel tube to specified outer diameter and length
Step 2
Molding of the nylon and PP bearing house with taper sleeve
Step 3
Assembly of the precision bearing into the sleeve
Step 4
Installation of the 08B14T sprocket with 8*12 pitch
Step 5
Final inspection of taper fit and sprocket alignment
Compared With Other Options
| Standard plastic sleeve roller | This model has a precision bearing and taper sleeve for better shaft fit and alignment |
|---|---|
| Non-tapered roller | The taper sleeve ensures a secure fit on the 12 mm shaft, reducing slippage |
| Metal bearing house roller | Nylon and PP housing reduces friction and wear compared to metal |
Double Sprocket Plastic Taper Sleeve Roller Questions
What is the shaft diameter for this roller?
The shaft diameter is 12 mm.
What sprocket type is used on this roller?
The sprocket type is 08B14T with a pitch of 8*12.
What material is the tube made of?
The tube is made of steel.
Is the bearing house made of plastic?
Yes, the bearing house is made of nylon and PP.
What is the taper degree of the sleeve?
The taper degree is 3.6.
Can this roller be used on a non-steel shaft?
It is designed for use with a steel tube and shaft; other materials are not specified.
Get a Price for Double Sprocket Plastic Taper Sleeve Roller
Send the quantity and any material or surface option you need, and a quotation comes back against this model number.