Single Sprocket Plastic Taper Sleeve Roller
The 06L1R5615/D2-12 is a single sprocket plastic taper sleeve roller with a precision bearing housed in a nylon and PP composite case. It has an outer diameter of 50 mm, a shaft diameter of 12 mm, and a taper degree of 3.6. The roller is designed to fit a steel tube and features an 8*12 pitch, 14 tooth sprocket type. It is suitable for use in conveyor systems requiring a precise fit and consistent drive engagement.
Product Overview
The 06L1R5615/D2-12 is a single sprocket plastic taper sleeve roller with a precision bearing housed in a nylon and PP composite case. It has an outer diameter of 50 mm, a shaft diameter of 12 mm, and a taper degree of 3.6. The roller is designed to fit a steel tube and features an 8*12 pitch, 14 tooth sprocket type. It is suitable for use in conveyor systems requiring a precise fit and consistent drive engagement.
Part of the Roller range, used in Warehouse and Distribution Centres.
Key Benefits
- Precision bearing ensures smooth rotation under load
- Nylon and PP composite case reduces weight and resists wear
- Taper sleeve design allows secure fit on a 12 mm shaft
- Sprocket type 8*12 with 14 teeth provides reliable drive engagement
- Steel tube material ensures strength and durability in industrial use
Application Scenarios
- Conveyor lines requiring a single sprocket drive with a precise shaft fit
- Assembly lines where consistent sprocket alignment is needed
- Material handling systems using steel tubes as roller supports
- Low maintenance conveyor sections where plastic sleeves reduce friction
- Systems where a taper sleeve roller must be mounted on a 12 mm shaft
Who It Is For
- Conveyor system integrators building drive-equipped roller conveyors
- Industrial equipment builders using steel tubes for roller support
- Material handling contractors installing sprocket-driven roller sections
- Production line builders needing consistent sprocket alignment
- Industrial distributors stocking taper sleeve rollers by shaft and sprocket type
Problems It Solves
- Mismatched sprocket and shaft sizes causing drive slippage or misalignment
- Rollers that loosen or rotate poorly on a shaft due to poor fit
- Need for a single component that combines sprocket and bearing in a tapered sleeve
- Lack of consistent sprocket drive engagement in low-cost conveyor builds
- Inconsistent roller performance when assembled from multiple suppliers
Technical Features
- Precision bearing inside a nylon and PP composite housing
- Taper sleeve design with 3.6 taper degree for secure shaft fit
- Outer diameter of 50 mm and shaft diameter of 12 mm
- Sprocket type 8*12 with 14 teeth for consistent drive engagement
- Steel tube material provides structural strength and wear resistance
Materials
- Nylon and PP composite housing for lightweight and wear-resistant performance
- Steel tube for structural strength and long-term durability
- Precision bearing for consistent rotation under load
Quality Control
- Bearing rotation checked for smooth operation before packing
- Sprocket alignment verified against the 8*12 pitch and 14 tooth specification
- Taper sleeve dimensions checked to ensure 12 mm shaft fit
- Housing material confirmed as nylon and PP as per order
- Shaft diameter verified at 12 mm with no tolerance claims
Customization Options
- Sprocket type selected between 8*12 and other available types
- Shaft diameter available in other sizes where 12 mm is not required
- Housing material available in other combinations where nylon and PP is not suitable
- Tube material available in other types where steel is not required
Use Guide
- Ensure the shaft diameter is 12 mm before mounting the roller
- Check that the taper sleeve fits snugly on the shaft without wobble
- Verify sprocket alignment with the drive chain or gear before operation
- Use only on steel tubes as specified in the model details
- Inspect the bearing rotation regularly to ensure smooth operation
Specifications
| Model No | 06L1R5615/D2-12 |
|---|---|
| Outer Diameter | 50 mm |
| Shaft Diameter | 12 mm |
| Taper Degree | 3.6 |
| Sprocket Type | 8*12 |
| Number of Teeth | 14 |
| Tube Material | Steel |
| Bearing Type | Precision Bearing |
| Housing Material | Nylon & PP |
Manufacturing Process
Step 1
Machining of the taper sleeve and housing
Step 2
Assembly of the precision bearing into the nylon and PP case
Step 3
Installation of the sprocket onto the roller body
Step 4
Final inspection of sprocket alignment and bearing rotation
Step 5
Packaging for shipment
Compared With Other Options
| Standard plastic roller with press fit sleeve | The taper sleeve provides a more secure fit on the shaft and reduces the risk of loosening during operation |
|---|---|
| Metal sprocket roller with plain bearing | The precision bearing in this model reduces friction and wear compared to a plain bearing |
| Roller with separate sprocket and bearing | The integrated design reduces assembly time and ensures consistent sprocket alignment |
Single Sprocket Plastic Taper Sleeve Roller Questions
What is the shaft diameter for this roller?
The shaft diameter is 12 mm.
What sprocket type is used on this roller?
The sprocket type is 8*12 with 14 teeth.
Is the housing made of nylon and PP?
Yes, the bearing housing is made of nylon and PP composite material.
What tube material is used?
The tube material is steel.
Can this roller be used on a non-steel tube?
The model is specified for steel tubes; use of other materials is not confirmed.
What is the taper degree?
The taper degree is 3.6.
Get a Price for Single Sprocket Plastic Taper Sleeve Roller
Send the quantity and any material or surface option you need, and a quotation comes back against this model number.