DGDD67-H Hall Brushless Outer Rotor Permanent Magnetic Motor Roller
The DGDD67-H is a Hall brushless outer rotor permanent magnetic motor roller designed for dynamic weighing applications in sorting machines with loads between 0 and 30 kg. It operates on AC 220V, delivers 600W of power, and runs at speeds from 300 to 750 RPM. The motor uses a 485 CAN control system and is suited for intermittent operation in belt conveyor systems. It does not require DC power and reduces current surging during frequent starts.
Product Overview
The DGDD67-H is a Hall brushless outer rotor permanent magnetic motor roller designed for dynamic weighing applications in sorting machines with loads between 0 and 30 kg. It operates on AC 220V, delivers 600W of power, and runs at speeds from 300 to 750 RPM. The motor uses a 485 CAN control system and is suited for intermittent operation in belt conveyor systems. It does not require DC power and reduces current surging during frequent starts.
Part of the DGDD Motor Roller range, used in Warehouse and Distribution Centres.
Key Benefits
- Operates on AC 220V without needing DC conversion
- 600W power output suitable for dynamic weighing in sorting systems
- Speed range of 300 to 750 RPM for controlled material handling
- 485 CAN control enables integration with industrial automation systems
- S2 intermittent duty cycle supports frequent start-stop operation
- Low current surge during startup reduces electrical load on the system
Application Scenarios
- Dynamic weighing stations in automated sorting lines for packages up to 30 kg
- Belt conveyors in warehouses that require frequent start-stop cycles
- Integration into sorting machines where consistent speed and control are needed
- Conveyor systems in production lines with intermittent operation patterns
- Applications where AC power is available and DC conversion is not desired
Who It Is For
- Conveyor system integrators building sorting and weighing lines
- Material handling equipment builders designing automated sorting systems
- Warehouse and logistics automation contractors installing dynamic weighing stations
- Industrial distributors sourcing motor rollers for AC-powered conveyor applications
- Production line builders needing reliable motors for intermittent belt operation
Problems It Solves
- Need for DC power in motor rollers that increases system cost and complexity
- High current surge during frequent starts in conveyor systems with short duty cycles
- Lack of reliable motor rollers for dynamic weighing in sorting machines
- Inconsistent speed control in intermittent conveyor operations
- Difficulty integrating motor rollers into AC-powered systems without additional converters
Technical Features
- Outer rotor permanent magnetic design for high torque at low speed
- Hall sensor feedback for precise brushless motor control
- AC 220V operation eliminates need for DC power supplies
- 485 CAN communication for integration with PLCs and control systems
- S2 intermittent working mode suitable for repeated start-stop cycles
- Speed range of 300 to 750 RPM for adjustable material handling rates
Materials
- Outer rotor permanent magnet construction for efficient power delivery
- Brushless design with Hall sensors for reliable commutation
- AC-compatible electronics for direct connection to 220V mains
Quality Control
- Speed range verified across 300 to 750 RPM under load
- 485 CAN communication tested for signal stability
- AC 220V operation confirmed without DC conversion
- Intermittent duty cycle tested to ensure reliability during frequent starts
- Motor roller checked for smooth rotation and consistent output
Customization Options
- Available in the specified AC 220V, 600W, 300~750 RPM configuration
- Other DGDD series models available for different power, speed or voltage needs
- Control interface can be adapted to other protocols if required
Use Guide
- Ensure the conveyor belt load is within 0 to 30 kg for accurate dynamic weighing
- Connect the motor roller to AC 220V power without requiring DC conversion
- Use the 485 CAN interface to integrate with PLCs or control systems
- Verify that the system operates in intermittent mode (S2 duty cycle)
- Set the speed to 300 to 750 RPM based on material handling requirements
Specifications
| Model No | DGDD67-H |
|---|---|
| Voltage | AC 220V |
| Power | 600W |
| Speed Range | 300~750 RPM |
| Control Way | 485 CAN |
| Working Way | S2 |
| Application | Dynamic weighing in sorting machines (0~30 kg) |
Manufacturing Process
Step 1
Assembly of outer rotor permanent magnet motor with Hall sensors
Step 2
Integration of 485 CAN control circuitry
Step 3
Testing of speed range and control response
Step 4
Verification of AC 220V operation and intermittent duty cycle
Step 5
Final inspection and packaging for export
Compared With Other Options
| DC brushless motor rollers | The DGDD67-H runs directly on AC 220V, eliminating the need for a DC power supply and reducing system cost |
|---|---|
| Standard AC induction motor rollers | The brushless outer rotor design offers smoother start-up and lower current surge during frequent starts |
| Motor rollers with no control interface | The 485 CAN control allows integration into automated systems, enabling remote monitoring and speed adjustment |
DGDD67-H Hall Brushless Outer Rotor Permanent Magnetic Motor Roller Questions
What voltage does the DGDD67-H use?
It operates on AC 220V and does not require DC power.
Can this motor roller be used for dynamic weighing?
Yes, it is designed for dynamic weighing in sorting machines with loads from 0 to 30 kg.
What is the speed range of the motor roller?
It runs between 300 and 750 RPM.
Does it require a DC power supply?
No, it runs directly on AC 220V, which reduces system complexity and cost.
What control system does it use?
It uses a 485 CAN interface for communication with control systems.
Is it suitable for frequent start-stop cycles?
Yes, it is rated for S2 intermittent duty and handles frequent starts with low current surge.
Get a Price for DGDD67-H Hall Brushless Outer Rotor Permanent Magnetic Motor Roller
Send the quantity and any material or surface option you need, and a quotation comes back against this model number.