cutting bearing metal wheel Conveyor W-2050BS
The W-2050BS is a cutting bearing metal wheel conveyor with a 20 mm diameter wheel, 50 mm width, and M6 shaft, rated for 50 kg per piece load capacity. It is constructed from carbon steel with a galvanized finish standard and chrome plating available on request. The unit features a frame size of 55.2 mm width, 25 mm height, and 1.6 mm thickness, with a roller track height of 27 mm and lengths of 1000 mm, 1500 mm, or 2000 mm. Roller pitch options are 25 mm, 30 mm, or 35 mm.
Product Overview
The W-2050BS is a cutting bearing metal wheel conveyor with a 20 mm diameter wheel, 50 mm width, and M6 shaft, rated for 50 kg per piece load capacity. It is constructed from carbon steel with a galvanized finish standard and chrome plating available on request. The unit features a frame size of 55.2 mm width, 25 mm height, and 1.6 mm thickness, with a roller track height of 27 mm and lengths of 1000 mm, 1500 mm, or 2000 mm. Roller pitch options are 25 mm, 30 mm, or 35 mm.
Part of the Metal Roller Track range, used in Warehouse and Distribution Centres.
Key Benefits
- Rated for 50 kg per piece load capacity in standard service
- Cutting bearing design ensures smooth operation and low noise compared to pressed bearing rollers
- Carbon steel construction with galvanized finish for durability in industrial environments
- Chrome plating available for enhanced wear resistance and appearance
- Standard roller pitch options of 25 mm, 30 mm, or 35 mm for flexible system integration
Application Scenarios
- Medium to high load conveyor lines in warehouse and distribution centers
- Assembly lines requiring reliable, low-maintenance roller support for heavy components
- Material handling systems where smooth, quiet operation is needed for product integrity
- Conveyor sections with frequent start-stop cycles and high-duty cycles
- Systems where roller track length and pitch must match existing line design
Who It Is For
- Conveyor system integrators building medium to high load conveyors
- Industrial equipment builders requiring durable roller tracks for production lines
- Warehouse automation contractors installing material handling systems
- Manufacturers of industrial conveyors sourcing consistent roller track components
- Industrial distributors stocking metal roller tracks by load and size
Problems It Solves
- Rollers that wear out quickly under repeated load and friction
- Noisy operation in conveyor lines due to poor bearing or pressed roller construction
- Inconsistent roller spacing or track length causing misalignment in product flow
- Lack of standardization across multiple suppliers for roller track components
- Difficulty in matching shaft size, diameter, and load rating across a single conveyor system
Technical Features
- Cutting bearing design from steel and pipe for improved durability and smooth operation
- M6 shaft with self-locking nut for secure attachment to conveyor frame
- Frame size of 55.2 mm width, 25 mm height, and 1.6 mm thickness for structural rigidity
- Roller track height of 27 mm to match standard conveyor deck levels
- Available in 1000 mm, 1500 mm, and 2000 mm lengths to suit different line configurations
Materials
- Carbon steel for the wheel and frame, providing strength and load support
- Galvanized finish for corrosion resistance in dry or mildly humid environments
- Chrome plating available for improved wear resistance and surface hardness
Quality Control
- Load capacity verified against the 50 kg per piece rating
- Shaft and self-locking nut checked for proper fit and retention
- Roller track pitch measured to ensure consistency across the length
- Surface finish inspected for uniformity and absence of defects
- Frame dimensions verified against the 55.2 mm × 25 mm × 1.6 mm specification
Customization Options
- Chrome plating available as an alternative to standard galvanized finish
- Roller track length available in 1000 mm, 1500 mm, or 2000 mm
- Roller pitch available in 25 mm, 30 mm, or 35 mm
- Other models in the W Series available for different load and size requirements
- Shaft length and diameter can be adjusted based on frame and mounting needs
Use Guide
- Ensure the shaft size M6 matches the mounting holes in your conveyor frame
- Verify the roller pitch matches the spacing of adjacent rollers in your system
- Use the 50 kg per piece load rating as the maximum for each individual roller
- Select chrome plating if the environment requires higher wear resistance
- Confirm the roller track length fits the required conveyor section without gaps
Specifications
| Model No | W-2050BS |
|---|---|
| Wheel Diameter | 20 mm |
| Wheel Width | 50 mm |
| Shaft Size | M6 × 65 mm |
| Shaft Type | With self locking nut |
| Frame Size | 55.2 mm × 25 mm × 1.6 mm |
| Roller Track Height | 27 mm |
| Roller Track Length | 1000 mm, 1500 mm, 2000 mm |
| Roller Pitch | 25 mm, 30 mm, 35 mm |
| Load Capacity | 50 kg per piece |
| Material | Carbon steel |
| Standard Finish | Galvanized |
| Custom Finish | Chrome plating available |
Manufacturing Process
Step 1
Cutting and shaping of steel pipe and plate for the roller track and frame
Step 2
Assembly of the cutting bearing into the wheel and shaft
Step 3
Welding or fastening of the frame to the roller track
Step 4
Finishing operations including galvanizing or chrome plating as ordered
Step 5
Final inspection and packing for shipment
Compared With Other Options
| Pressed bearing metal roller tracks | Cutting bearing design offers longer life and smoother operation than pressed rollers, which are more prone to deformation |
|---|---|
| Lower load rated W Series models | The W-2050BS suits 50 kg per piece, so lighter loads are better served by smaller models with lower pitch and reduced frame size |
| Plastic roller tracks | Metal construction provides higher load capacity and wear resistance compared to plastic, which may deform under heavy or repeated loads |
cutting bearing metal wheel Conveyor W-2050BS Questions
What is the load capacity of the W-2050BS metal wheel conveyor?
The load capacity is 50 kg per piece, rated for standard service conditions.
What shaft size does the W-2050BS use?
It uses an M6 shaft with a length of 65 mm and includes a self-locking nut.
Is chrome plating available for this model?
Yes, chrome plating is available as a custom finish, in addition to the standard galvanized finish.
What roller track lengths are available?
The W-2050BS is available in 1000 mm, 1500 mm, and 2000 mm lengths.
What roller pitch options are offered?
The roller pitch is available in 25 mm, 30 mm, and 35 mm to match different conveyor designs.
Can I get other models in the same series?
Yes, other models in the W Series are available with different wheel sizes, widths, and load ratings.
Get a Price for cutting bearing metal wheel Conveyor W-2050BS
Send the quantity and any material or surface option you need, and a quotation comes back against this model number.