cutting bearing metal skate wheel track W-50BS
The W-50BS is a cutting bearing metal skate wheel track made from carbon steel, designed for medium to high load conveying systems. It features a roller wheel with a diameter of 50 mm and width of 14.5 mm, mounted on an M8x40 shaft with a self locking nut. The track frame measures 70 mm in width, 55 mm in height, and 3.2 mm in thickness, with a roller track height of 60 mm and available lengths of 1000 mm, 2000 mm, and 3000 mm. Roller pitch options include 75 mm, 100 mm, and 150 mm. Each roller unit is rated for 80 kg per piece load capacity.
Product Overview
The W-50BS is a cutting bearing metal skate wheel track made from carbon steel, designed for medium to high load conveying systems. It features a roller wheel with a diameter of 50 mm and width of 14.5 mm, mounted on an M8x40 shaft with a self locking nut. The track frame measures 70 mm in width, 55 mm in height, and 3.2 mm in thickness, with a roller track height of 60 mm and available lengths of 1000 mm, 2000 mm, and 3000 mm. Roller pitch options include 75 mm, 100 mm, and 150 mm. Each roller unit is rated for 80 kg per piece load capacity.
Part of the Metal Roller Track range, used in Warehouse and Distribution Centres.
Key Benefits
- Manufactured from cutting circle steel and pipe for smooth, low noise operation
- Higher load capacity and longer wear life compared to pressed bearing roller tracks
- Standard galvanized finish for corrosion resistance, optional chrome plating for customization
- M8x40 shaft with self locking nut ensures secure wheel retention
- Available in multiple lengths and pitch options to match conveyor line spacing
Application Scenarios
- Medium to high load conveyor lines in warehouse automation systems
- Assembly line transfer points where smooth, consistent roller motion is required
- Material handling equipment requiring durable roller tracks with consistent height
- Conveyor systems where noise reduction and long service life are critical
- Custom-built conveyors where track length and pitch must match existing line design
Who It Is For
- Conveyor system integrators building medium to high load conveyors
- Material handling equipment builders needing durable roller tracks
- Industrial distributors sourcing metal roller tracks in volume
- Warehouse automation contractors installing conveyors with consistent roller spacing
- Production line builders requiring tracks with specific length and pitch
Problems It Solves
- Roller tracks that wear out quickly under medium to high load conditions
- Noisy operation from pressed or stamped roller track components
- Inconsistent roller height due to poor manufacturing tolerances
- Lack of standardization in track length and pitch across different suppliers
- Difficulty in matching shaft size and mounting method to existing conveyor frame
Technical Features
- Constructed from cutting circle steel and pipe for improved durability
- Roller wheel diameter of 50 mm and width of 14.5 mm for consistent load distribution
- M8x40 shaft with self locking nut for secure wheel attachment
- Frame thickness of 3.2 mm for rigidity and long-term stability
- Roller track height of 60 mm to match standard conveyor deck levels
- Available in 1000 mm, 2000 mm, and 3000 mm lengths to suit different line sizes
- Multiple roller pitch options: 75 mm, 100 mm, and 150 mm for alignment with product spacing
Materials
- Carbon steel used for the roller wheel and frame for high strength and wear resistance
- Galvanized finish standard for corrosion protection in dry or indoor environments
- Chrome plating available as a custom option for improved surface hardness and appearance
Quality Control
- Load capacity verified against the 80 kg per piece rating
- Roller rotation checked for smoothness and consistent motion
- Shaft and nut assembly tested for secure fit and resistance to loosening
- Frame dimensions checked for flatness and alignment across the track
- Surface finish inspected for even coverage and absence of defects
Customization Options
- Option to replace galvanized finish with chrome plating
- Roller track length available in 1000 mm, 2000 mm, and 3000 mm
- Roller pitch selectable from 75 mm, 100 mm, and 150 mm
- Other W Series models available with different wheel sizes and load ratings
Use Guide
- Ensure the roller pitch matches the spacing of the product or load being conveyed
- Verify that the 80 kg per piece load capacity is not exceeded by the total load on each roller
- Use the M8x40 shaft with self locking nut to prevent wheel loosening during operation
- Choose chrome plating for environments requiring higher surface hardness or appearance
- Match the track length to the conveyor line section to avoid cutting or joining
Specifications
| Model No | W-50BS |
|---|---|
| Roller Wheel Size | Φ50 mm × 14.5 mm |
| Shaft | M8 × 40 with self locking nut |
| Frame Size | 70 mm × 55 mm × 3.2 mm |
| Roller Track Height | 60 mm |
| Roller Track Length | 1000 mm, 2000 mm, 3000 mm |
| Roller Pitch | 75 mm, 100 mm, 150 mm |
| Load Capacity | 80 kg per piece |
| Material | Carbon Steel |
| Standard Finish | Galvanized |
| Custom Finish | Chrome plating available |
Manufacturing Process
Step 1
Cutting circle steel and pipe to form the roller track structure
Step 2
Machining of roller wheel and shaft mounting holes
Step 3
Assembly of roller wheel onto M8x40 shaft with self locking nut
Step 4
Frame fabrication and welding to form the 70 mm × 55 mm × 3.2 mm profile
Step 5
Final assembly of rollers into the frame at specified pitch
Compared With Other Options
| Pressed bearing metal roller tracks | Cutting bearing tracks offer smoother operation and longer wear life due to precision machining of steel and pipe |
|---|---|
| Standard galvanized finish | Chrome plating provides a harder surface and better appearance but is available only as a custom option |
| Other W Series models | W-50BS has a larger wheel size and higher load rating than smaller models like W-2015BS or W-25BS |
cutting bearing metal skate wheel track W-50BS Questions
What is the load capacity of one roller unit on the W-50BS track?
Each roller unit is rated for 80 kg per piece.
What shaft size is used on the W-50BS skate wheel track?
The shaft is M8x40 with a self locking nut for secure attachment.
Is chrome plating available for the W-50BS track?
Yes, chrome plating is available as a custom finish, in addition to the standard galvanized finish.
What lengths are available for the W-50BS roller track?
Available in 1000 mm, 2000 mm, and 3000 mm lengths.
What roller pitch options are offered for the W-50BS?
Roller pitch options are 75 mm, 100 mm, and 150 mm.
What material is used in the construction of the W-50BS track?
The track is made from carbon steel with a standard galvanized finish.
Get a Price for cutting bearing metal skate wheel track W-50BS
Send the quantity and any material or surface option you need, and a quotation comes back against this model number.