200mm Kapoor Modern Art Red Stainless Steel Mirror Recessed Wall Decor
A concave recessed wall decor in 304 or 316 stainless steel, sized at 200mm or custom dimensions, with a mirror-polished finish and red surface treatment. The form is developed as a single curved panel welded to a backing frame, t
What This Piece Is
A concave recessed wall decor in 304 or 316 stainless steel, sized at 200mm or custom dimensions, with a mirror-polished finish and red surface treatment. The form is developed as a single curved panel welded to a backing frame, then hand-polished to eliminate visible seams and achieve a reflective surface. Because stainless steel resists corrosion and high temperature, the piece is suitable for indoor and sheltered outdoor use in hotels, lobbies, and commercial interiors. Kapur builds it from your photo, drawing or 3D file, and inspects it at every stage from fabrication through to loading on the vessel.
Key Benefits
- Made to your specified size, including 200mm or any custom dimension, so it fits the exact wall space
- 304 or 316 stainless steel selected based on environmental exposure rather than defaulting to one grade
- Hand-polished mirror finish carried across the entire curved surface so welds are not visible
- Corrosion and high temperature resistance allow permanent indoor or sheltered outdoor installation
- Built from your photo, drawing or 3D file so an interior design concept can be produced directly
- Inspected at each production stage with digital photos sent before shipment
Buyers and Specifiers
- Interior designers specifying a reflective wall element in a high-end residential or commercial space
- Hotel and property developers commissioning wall art for guest areas on a build schedule
- Commercial fit-out contractors needing a custom metal element with a polished finish
- Sculpture galleries sourcing small-scale metal wall decor for exhibitions
- Importers of modern metal art looking for consistent quality from a Chinese manufacturer
What It Fixes
- Fixed catalogue sizes do not fit actual wall dimensions so the piece is made to your exact size
- Painted surfaces fade and scratch over time while stainless steel maintains its finish
- Welded seams on curved panels often show under light so joints are hand-polished to match the surface
- Buyers cannot inspect an overseas factory so digital photos are supplied at each stage
- Small wall sculptures are damaged in transit so each piece ships in a wooden crate with foam or plastic lining
Where This Sculpture Is Installed
Hotel lobbies and reception areas needing a reflective wall feature at eye level
Commercial interiors and office atriums with high ceilings and limited wall space
Shopping mall corridors and retail entrances with a modern aesthetic
Residential interiors with minimalist or contemporary design themes
Interior design projects requiring a focal point with light reflection and depth
Sculpture galleries and art importers sourcing small-scale metal wall art from China
How It Is Built
- Single curved panel formed over a backing frame for structural support
- Grade selected between 304 and 316 based on installation environment
- Hand-polished to a mirror finish after welding so seams are not visible
- Overall size and curvature set by the customer rather than fixed
- Any shape reproduced from a supplied sample drawing or reference photo
- Base mounting detail prepared for wall installation with anchor points
Materials
- 304 stainless steel for indoor installations and low-exposure environments
- 316 stainless steel for areas with higher humidity or potential chloride exposure
- Internal backing frame to support the curved panel and ensure flat mounting
- Material grade confirmed with you before cutting rather than assumed
Specification Table
| Material | 304 or 316 stainless steel |
|---|---|
| Size | 200mm or custom size |
| Thickness | 1mm to 4mm |
| Finish | Hand polished to mirror finish |
| Color | Red surface treatment available |
| Packing | Outer standard wooden crate, inner in plastic or foam |
| Custom Input Accepted | Photo or drawing from customer |
| Application | Indoor and sheltered outdoor spaces |
| Wind Load Rating | TBC |
Additional figures quoted elsewhere for this item are still being confirmed with the factory and are marked TBC rather than published here.
How We Make It
- Confirm the form from your photo, drawing or 3D file and agree final dimensions
- Build the internal backing frame and set out the concave curvature
- Cut and form the stainless steel panel to the developed surface
- Weld the panel to the frame section by section
- Grind the seams flat and hand-polish the entire surface to mirror finish
- Inspect, photograph and crate for ocean freight
How It Is Checked
- Kapur runs its own QC team rather than relying on the fabrication crew to sign off their work
- Inspection at all stages from production up to loading on vessel
- Digital pictures supplied at each stage so you can approve before the next step
- Weekly reports during the production window
- Your own QC team or third party inspector is welcome to check quality in our factory
Certifications
No certification is claimed for this piece because none is documented on our source records. Tell us what your local authority or main contractor requires and we will confirm per project before you order.
From Your Drawing to the Vessel
Every project runs through the same six stages, and you see photographs at each one before the next begins.
Enquiry
Send dimensions, a reference photo or drawing and the site conditions
Design
Our designers confirm the form, material grade and finish with you
Fabrication
Frame built, panels cut and formed, shell welded section by section
Finishing
Seams ground back and the surface polished or left to weather
Inspection
Our QC team checks each stage and sends digital pictures
Crating
Outer wooden crate, inner plastic or foam, then loading on vessel
What You Can Change
- Overall size and curvature set to your drawing or reference
- Choice of 304 or 316 stainless steel
- Mirror polished or brushed surface finish
- Coloured or coated variants on request
- Base plate and fixing detail adapted to your wall structure
- OEM and ODM orders accepted
Ordering and Care
- Send the wall dimensions, viewing angle and a reference photo or drawing when you enquire
- Confirm 304 or 316 based on proximity to coastal areas or exposure to de-icing salt
- Ensure the wall surface is level and structurally sound to support the mounting system
- Allow access for mounting hardware installation and alignment during installation
- Clean the surface with water and a soft cloth; avoid abrasive pads on the mirror finish
- Rinse more often in high-humidity areas to prevent water spots or mineral deposits
How It Compares With Other Options
An honest read on the trade-offs, so the material decision is made before fabrication starts.
| Corten weathering steel wall decor | Corten develops a rusted patina that changes over time, while stainless steel maintains a consistent mirror finish and reflects light |
|---|---|
| Fiberglass wall panel | Fiberglass is lighter and cheaper to ship and takes any colour, but it is not as durable as stainless steel under impact or abrasion |
| Painted steel wall decor | Painted steel requires recoating over time and can chip, while stainless steel keeps its finish without maintenance |
| Aluminum wall panel | Aluminum is lighter and less expensive but scratches more easily and does not hold a mirror polish as well as stainless steel |
Project Types for This Piece
More From Stainless Steel Wall Decorations
Questions About This Sculpture
Can you make this in a size other than 200mm?
Yes. Size is custom on this piece, and any dimension from 30cm up to larger sizes is available. Send your drawing or dimensions and we will confirm feasibility and price.
How long does production and shipping take?
Production takes 25-30 days and ocean transport a further 15-20 days. Some items are held in stock, which shortens the production window.
Should I choose 304 or 316 stainless steel?
304 covers most indoor and low-exposure environments. 316 is the safer choice near the coast or where de-icing salt is used, because it resists chloride corrosion better.
Can you work from my own design?
Yes. Orders are accepted from your photo or drawing, and OEM and ODM work is welcome. Send a 3D file, a sketch or detail pictures and our design team will work from it.
How is the wall decor packed for sea freight?
Each piece ships in an outer standard wooden crate with plastic or foam lining inside to protect the polished surface during handling.
Can I inspect the sculpture before it ships?
Yes. Our QC team inspects at all stages up to loading on the vessel and supplies digital pictures, and your own QC team is welcome to check quality in our factory.
Do you supply a certificate or load calculation?
Certification and structural documentation are confirmed per project. Tell us what your local authority requires when you send the enquiry.
Request a Quote for This Sculpture
Send your dimensions, the installation site and the finish you want. We will confirm the material grade, price and production window.