200mm Modern Art Sculpture Blue Stainless Steel Mirror Oval Concave Wall Decorations
A hand-polished oval concave wall decoration in 304 or 316 stainless steel, sized at 200mm as standard but available in any dimension you specify. The surface is formed as a single curved shell with a mirror finish, achieved throu
What This Piece Is
A hand-polished oval concave wall decoration in 304 or 316 stainless steel, sized at 200mm as standard but available in any dimension you specify. The surface is formed as a single curved shell with a mirror finish, achieved through hand polishing after welding. Because stainless steel resists corrosion and high temperature, the piece maintains its reflective surface in indoor and outdoor environments without requiring protective coating. Kapur builds it from your photo, drawing or 3D file, and inspects it at every stage from fabrication through to loading on the vessel.
Key Benefits
- Made to your exact size rather than a fixed catalogue dimension so it fits the wall space and sightlines
- 304 or 316 stainless steel selected based on the installation environment rather than defaulted to one grade
- Mirror finish applied by hand so the surface reflects light evenly without visible tool marks
- Corrosion and high temperature resistance allow permanent installation in both indoor and outdoor settings
- Built from your photo, drawing or 3D file so an architect’s concept can be produced directly
- Inspected at each production stage with digital photos sent before shipment
Buyers and Specifiers
- Interior designers specifying a reflective wall feature for a high-end project
- Hotel and property developers commissioning branded interior artwork
- Corporate clients installing custom wall art in headquarters and showrooms
- Sculpture galleries and importers sourcing modern metal wall decor from China
- Landscape architects integrating reflective elements into covered public spaces
What It Fixes
- Fixed catalogue sizes do not match real wall dimensions so the piece is made to your exact size
- Painted or coated surfaces fade and chip over time while stainless steel keeps its finish
- Welded seams on curved surfaces often show under light so the entire surface is hand polished
- Buyers cannot inspect an overseas factory so digital photos are supplied at each stage
- Large wall pieces are damaged in transit so each unit ships in a wooden crate with foam or plastic lining
Where This Sculpture Is Installed
Hotel lobbies and reception areas where a reflective surface enhances ambient lighting
Shopping mall interior walls and atriums that need a modern, high-gloss accent
Corporate office entrances and executive suites with minimalist design
Residential interior walls in high-end apartments and penthouses
Public art installations in covered plazas and indoor civic spaces
Interior design projects requiring a large, eye-catching wall feature
How It Is Built
- Single curved shell formed from welded stainless steel panels over a support frame
- Grade selected between 304 and 316 according to indoor or outdoor exposure
- Surface hand polished to a mirror finish after welding to remove tool marks
- Curvature and overall size set by the customer rather than fixed
- Any shape reproduced from a supplied sample drawing or reference photo
- Base plate and fixing detail prepared for the installation surface
Materials
- 304 stainless steel for indoor installations and inland outdoor use
- 316 stainless steel for coastal or high-salt environments where chloride resistance is needed
- Internal support frame to maintain shape and rigidity behind the visible shell
- Material grade confirmed with you before cutting rather than assumed
Specification Table
| Material | 304 or 316 stainless steel |
|---|---|
| Size | Custom size, including 200cm, 180cm, 150cm, 120cm, 100cm, 80cm, 60cm, 40cm, 30cm |
| Shape | Oval with concave surface |
| Finish | Mirror polished by hand |
| Thickness | 1mm to 4mm |
| Packing | Outer standard wooden crate, inner in plastic or foam |
| Custom Input Accepted | Photo or drawing from customer |
| Application | Indoor and outdoor walls, hotels, shopping malls, offices |
| Wind Load Rating | TBC |
Additional figures quoted elsewhere for this item are still being confirmed with the factory and are marked TBC rather than published here.
How We Make It
- Confirm the form from your photo, drawing or 3D file and agree final dimensions
- Build the internal support frame and set out the oval concave geometry
- Cut and form the stainless steel panels to the developed surface
- Weld the shell to the frame section by section
- Grind the seams flat and hand polish the entire surface to mirror finish
- Inspect, photograph and crate for ocean freight
How It Is Checked
- Kapur runs its own QC team rather than relying on the fabrication crew to sign off their work
- Inspection at all stages from production up to loading on vessel
- Digital pictures supplied at each stage so you can approve before the next step
- Weekly reports during the production window
- Your own QC team or third party inspector is welcome to check quality in the factory
Certifications
No certification is claimed for this piece because none is documented on our source records. Tell us what your local authority or main contractor requires and we will confirm per project before you order.
From Your Drawing to the Vessel
Every project runs through the same six stages, and you see photographs at each one before the next begins.
Enquiry
Send dimensions, a reference photo or drawing and the site conditions
Design
Our designers confirm the form, material grade and finish with you
Fabrication
Frame built, panels cut and formed, shell welded section by section
Finishing
Seams ground back and the surface polished or left to weather
Inspection
Our QC team checks each stage and sends digital pictures
Crating
Outer wooden crate, inner plastic or foam, then loading on vessel
What You Can Change
- Overall size and curvature set to your drawing
- Choice of 304 or 316 stainless steel
- Mirror polished surface finish
- Coloured or coated variants on request
- Base plate and fixing detail adapted to your wall or foundation
- OEM and ODM orders accepted
Ordering and Care
- Send the wall dimensions, viewing distance and a reference photo or drawing when you enquire
- Confirm 304 or 316 based on proximity to the sea or exposure to road salt
- Prepare a solid wall surface with mounting points matched to the base plate drawing
- Allow access for a small team to install the piece with hand tools or a lift
- Clean the surface with water and a soft cloth; avoid abrasive pads on the mirror finish
- Rinse more often at coastal sites to prevent salt residue from dulling the polish
How It Compares With Other Options
An honest read on the trade-offs, so the material decision is made before fabrication starts.
| Corten weathering steel wall decoration | Corten develops a stable rust patina over time and suits natural or industrial settings, while stainless steel maintains a bright, reflective surface |
|---|---|
| Fiberglass wall decoration | Fiberglass is lighter and cheaper to ship and takes any colour, but it is not as durable as stainless steel in high-traffic or outdoor environments |
| Painted carbon steel wall panel | Painted steel costs less initially but requires recoating; stainless steel keeps its finish without a paint cycle |
| Glass wall panel | Glass is fragile and can break under impact; stainless steel is impact-resistant and maintains its shape |
Project Types for This Piece
More From Stainless Steel Wall Decorations
Questions About This Sculpture
Can you make this in a size that is not listed?
Yes. Size is custom on this piece, and both curvature and height are made to your drawing. Send your dimensions and we will confirm feasibility and price.
How long does production and shipping take?
Production takes 25-30 days and ocean transport a further 15-20 days. Some items are held in stock, which shortens the production window.
Should I choose 304 or 316 stainless steel?
304 covers most indoor and inland outdoor installations. 316 is the safer choice near the coast or where de-icing salt is used, because it resists chloride corrosion better.
Can you work from my own design?
Yes. Orders are accepted from your photo or drawing, and OEM and ODM work is welcome. Send a 3D file, a sketch or detail pictures and our design team will work from it.
How is the sculpture packed for sea freight?
Each piece ships in an outer standard wooden crate with plastic or foam lining inside to protect the polished surface during handling.
Can I inspect the sculpture before it ships?
Yes. Our QC team inspects at all stages up to loading on the vessel and supplies digital pictures, and your own QC team is welcome to check quality in our factory.
Do you supply a certificate or load calculation?
Certification and structural documentation are confirmed per project. Tell us what your local authority requires when you send the enquiry.
Request a Quote for This Sculpture
Send your dimensions, the installation site and the finish you want. We will confirm the material grade, price and production window.