F1215DB FR Cotton Coverall – Flame Resistant, Anti-Static, Arc Flash Protection
The F1215DB is a 100% FR cotton coverall certified to EN ISO 11612, EN ISO 11611 Class 1, EN 1149-5 and IEC 61482-2, with an arc rating of 13 cal/cm². It is the garment to quote when a tender asks for flame, anti-static and arc protection in one piece rather than three separate certificates.
- One garment answers flame, anti-static and arc flash clauses in the same tender
- 13 cal/cm² arc rating documented, so electrical contractors can match it to their hazard assessment
- Triple-needle stitching and a heavy-duty brass zipper with storm flap survive industrial laundering
- Seven pockets keep tools on the worker instead of on the floor of a live area
Manufactured by Guangxi Dahua Mingshun Protective Products Co., Ltd in Dahua County, Guangxi, China. OEM and ODM available.
Who It Is For
- Safety distributors bidding certified FR tenders
- Oil, gas and petrochemical contractors
- Utilities running arc flash programmes
Problems It Solves
- Buying separate FR, anti-static and arc-rated garments doubles stock lines and cost
- Uncertified coveralls fail site audits even when the fabric performs
- Zippers and seams are usually the first failure point after repeated industrial washing
Technical Data
| Model | F1215DB |
|---|---|
| Category | FR Clothing, WORK CLOTHES |
| Size Range | Range S–5XL (Custom s available) Colors Navy, Orange, Red, Custom Closure Heavy-duty brass zipper with snap storm flap Pockets 2 chest pockets, 2 side pockets |
| Stitching | Stitching – Reinforced seams for longer garment life. Comfort & Fit – Breathable |
| Standards | EN ISO 11612, EN ISO 11611, EN 1149-5, IEC 61482-2, ISO 11612, ISO 11611 |
| Customisation | OEM and ODM, custom colours, labels and packaging |
Technical Features
- Flame
- Resistant
- Protection – Certified to
- EN ISO 11612 and
- EN ISO 11611
- Class 1. Anti-Static
- Properties – Meets
- EN 1149-5 for electrostatic discharge protection. Arc
- Flash
- Protection – IEC 61482-2 compliant for electric arc safety. Durable
- Triple
- Stitching – Reinforced seams for longer garment life. Comfort & Fit – Breathable
Where This Model Is Used
Welding and metal fabrication
Oil and gas operations
Petrochemical plants
Power and electrical maintenance
How This Product Is Made And Checked
Raw Material Inspection
Leather and FR fabric are checked for thickness, grain, colour consistency and defects before cutting.
Cutting Control
Panels are cut to the pattern set for each model, with waste and orientation checked so the leather grain runs correctly.
In-Line Sewing Check
Kevlar thread, stitch density and reinforcement points are checked on the line while the garment is still being built.
Finished Product Inspection
Sizing, closures, snaps, straps and labelling are verified against the model specification.
Packing Inspection
Quantities, size splits, inner packing and carton marks are checked against the order before shipment.
Standards referenced on this model: EN ISO 11612, EN ISO 11611, EN 1149-5, IEC 61482-2, ISO 11612, ISO 11611. Test reports are supplied with export orders on request.
Use Guide
- Close the storm flap over the zipper so no metal is exposed to the arc
- Do not use fabric softener or bleach; both degrade FR performance and anti-static behaviour
- Replace the coverall when fabric is torn, worn through or contaminated with flammable product
Customisation Options
- Custom colours and leather combinations
- Own-brand labels, hang tags and cuff branding
- Custom size charts and mixed size splits
- Polybag printing, inner packing and carton marks
How It Compares With Other Models
| MS-316 FR cotton coverall | F1215DB adds EN 1149-5 anti-static and IEC 61482-2 arc protection; MS-316 covers EN ISO 11612 and NFPA 2112 flame protection |
|---|---|
| FR jacket and trousers sold separately | A coverall leaves no gap at the waist when the wearer bends or reaches overhead |
Questions About The F1215DB
What is the arc rating of this coverall?
Which standards is it certified to?
What sizes and colours are available?
Is OEM branding possible on a certified garment?
What is the standard lead time?
What is the minimum order quantity?
Where This Model Is Specified
Guides That Cover This Product
Request A Quotation For The F1215DB
Send the quantity, size split and any branding requirement. We will reply with pricing, lead time and sample options.