Drilling
Drilling
Radial drilling machine Z3040x16/2, Z3050x16/2, ZQ3050x20/2
All controls centralized on the head stock easy operation and change.Clamping for assemblies and speed change of spindle achiered by hydrandic power,cmle is sensitne owet.
The published data for this model lists max. drilling diameter of mm Φ40 Φ50 Φ50 and distance spindle axis to column generating line of mm 350 ~ 1600 350 ~ 1600.
- Part of the Drilling range
- Supplied by Shaanxi Jiade Group Co., Ltd, Xi'an, China
- Trade terms FOB, CFR, CIF, payment TT 30% with order and 70% before shipment
- Manual, packing list and shipping documents included
Product Overview
What the Radial drilling machine Z3040x16/2, Z3050x16/2, ZQ3050x20/2 Does
All controls centralized on the head stock easy operation and change.Clamping for assemblies and speed change of spindle achiered by hydrandic power,cmle is sensitne owet.
Key Benefits
Why Workshops Buy This Machine
Keeps the Work In House
Operations that would otherwise be sent out stay on your floor, which is what removes hole patterns drilled by hand on parts too large for a bench drill.
Parameters You Can Plan Around
The published data for this model lists max. drilling diameter of mm Φ40 Φ50 Φ50 and distance spindle axis to column generating line of mm 350 ~ 1600 350 ~ 1600.
Documented and Supported
The machine ships with an operation manual and a named contact who answers on WhatsApp, so commissioning questions do not go unanswered.
Matched Tooling Available
Chucks, arbors, vises and measuring equipment from the same supplier, quoted with the machine instead of chased separately.
Application Scenarios
Where the Radial drilling machine Z3040x16/2, Z3050x16/2, ZQ3050x20/2 Earns Its Place
- Hole patterns in plate and structural steel
- Tapping threads after drilling in one setup
- Bench work on small brackets and fittings
- Large fabrications handled under a radial arm
Scenarios are typical for drilling of this type. If your part is outside them, send the drawing and we will say plainly whether this model suits it.
Who It Is For
The Buyers This Machine Was Specified For
Problems It Solves
Three Situations This Machine Fixes
Subcontracting Delay
Sending this operation out adds days to every job. Running it in house on the Radial drilling machine Z3040x16/2, Z3050x16/2, ZQ3050x20/2 removes the queue you do not control.
Parts No Longer Available
When an original part cannot be bought, the only route left is to make or restore it, which needs the capacity this machine provides.
Unpredictable Quality
Work done on improvised equipment varies between operators. A purpose built machine with published parameters makes the result repeatable.
Technical Features
Features Listed by the Manufacturer
- With wide range of speed and feed.
- with manυ power and fine feeds.
- The feed of machines are very easily engaged and designgagedat any time.
- With safe and reliable feed safety machine all parts easy operation and change All controls centralized on the head stock easy operation and change.
- Clamping for assembli-es and speed change of spindle achie by hydrandic power .
- Main parts are made by machine center which import form KIA with high precision and efficiency.
Specifications
Published Parameter Table
| Max. drilling diameter | mm Φ40 Φ50 Φ50 |
|---|---|
| Distance spindle axis to column generating line | mm 350 ~ 1600 350 ~ 1600 |
| Diameter of column | mm 350 350 350 |
| Spindle speeds range | r/min 25 ~ 2000 25 ~ 2000 |
| Range of spindle feeds | mm/r 0.04 ~ 3.2 0.04 ~ 3.2 |
| Spindle nose to working surface of base plate | mm 350 ~ 1250 320 ~ 1220 |
| Dimension of worktable | mm 630 x 500 x 500 630 |
| Dimension of base | mm 2400 x 1000 x 200 2400 |
| Overall size | mm 2500 x 1060 x 2650 2500 |
| Power of main motor | kw 4 |
| Gross / Net Wight | kg 3650 / 3400 3650 / 3400 |
| Packing dimension | mm 2600 x 1120 x 2600 2600 |
Materials Manufacturing and Quality Control
How the Machine Is Built and Checked
Casting and Machining
Beds, columns and housings are machined in the group's production workshop on conventional and CNC equipment.
Assembly
Assembly is done in a dedicated workshop rather than on the production floor, which keeps swarf away from fitted surfaces.
Inspection
The inspection department checks components and assemblies before the machine goes to paint. Test records per machine are TBC on request.
Paint and Packing
Painting is done in house, then the machine is rust protected, crated and prepared for the container.
Certification scope for this model is marked TBC. We attach the certificates that actually apply to the machine and destination instead of publishing a blanket claim.
Customization Options
What Can Be Changed Before Production
- Motor voltage and frequency to match your supply, stated with the order
- Tooling and workholding packages selected for your first jobs
- Model variant chosen against your maximum workpiece size
- Documentation and marking requirements for your destination, TBC per country
Send a drawing of the part you need to produce. We select the model against that drawing rather than pushing the largest machine in the range.
Comparison With Other Models
Other Drilling Models Worth Comparing
| Radial drilling machine Z3040x16/2, Z3050x16/2, ZQ3050x20/2 | Max. drilling diameter mm Φ40 Φ50 Φ50 · this page |
|---|---|
| Auto-feed drilling machine ZB4116G, ZB4120G, ZB4132G, ZB4132GP, ZB5032B & ZB5032GP | Max. tapping capacity (Cast iron/Steel) mm M12/M10 M20/M16 M24/M20 M24/M20 · compare |
| Bench strong drilling machine Z4006G, Z4116G, Z4120G, Z4132G, Z5032G & Z5032GP | Max. tapping capacity (Cast iron/Steel) mm / M12/M10 M20/M16 M24/M20 M24/M20 · compare |
| Pillar type vertical drilling machine Z5025, Z5025B | Diameter of column mm 100 100 · compare |
| Pillar type vertical drilling machine Z5030, Z5035, Z5040 & Z5050 | Max. tapping capacity mm M20 M24 M27 M30 · compare |
Use Guide
Before and After the Machine Arrives
Check the Foundation
Confirm floor loading, levelling points and the space needed around the machine before the container arrives.
Power and Air
Match supply voltage and frequency to the machine data plate and provide the isolator and any compressed air the model needs.
Level and Run In
Level the machine, check the oil levels, then run the spindle or drive up through its speed range before cutting.
First Article and Service
Machine a test piece, measure it, and keep a service schedule from day one. Send us the measurement if something looks wrong.
Related Products
More From the Drilling Range
Drilling
Bench strong drilling machine Z4006G, Z4116G, Z4120G, Z4132G, Z5032G & Z5032GP
View specifications →
Related Guides and Solutions
Read Before You Order
Comparison
Bench Upright and Radial Drilling Machines Compared
Bench, upright, gear head and radial drilling machines differ by how the work gets under the spindle. That single question usually settles the choice.
SolutionMachine Shop Start Up Package
The four processes a general job shop needs before it can quote most local work.
Answers
Radial drilling machine Z3040x16/2, Z3050x16/2, ZQ3050x20/2 Questions
What is the max. drilling diameter of the Radial drilling machine Z3040x16/2, Z3050x16/2, ZQ3050x20/2?
The manufacturer data for this model gives max. drilling diameter mm Φ40 Φ50 Φ50. The full parameter list for every variant is in the specification table on this page and is confirmed in writing with the quotation.
Can you help me select the right variant of the Radial drilling machine Z3040x16/2, Z3050x16/2, ZQ3050x20/2?
Yes. Send the part drawing, the workpiece size and the output you need and our engineers propose the model that fits. If you already know the model code, quote it and we confirm availability.
What are the trade and payment terms?
We work on FOB, CFR, CIF terms. Payment is TT 30% with order and 70% before shipment, or irrevocable L/C at sight. Orders placed through our Alibaba account carry trade assurance cover up to USD 300,000.
How is the Radial drilling machine Z3040x16/2, Z3050x16/2, ZQ3050x20/2 packed for export?
The machine is cleaned, rust protected and fixed to a pallet or into a wooden case sized for that machine, then stuffed into a container or shipped break bulk when it is over height. Packing is confirmed before production starts.
What is the delivery time?
Delivery depends on the model and on stock at the time of order, so we confirm a firm date on the proforma invoice instead of quoting one standard figure for the whole catalogue.
Do you supply tooling and spare parts for the Radial drilling machine Z3040x16/2, Z3050x16/2, ZQ3050x20/2?
Yes. Chucks, arbors, vises and consumables are listed in our accessories range, and wear parts for this machine can be quoted with the machine or shipped later.
Get a Price for the Radial drilling machine Z3040x16/2, Z3050x16/2, ZQ3050x20/2
Tell us the destination port and the variant you need. You get a specification, packing dimensions and a price.