Measuring Tools
Flexible Magnetic Base Stand Holder
Magnetic stand that uses a switchable permanent magnet for convenient mounting onto flat iron or steel surfaces.The arm can be hydraulically locked in any position using the knob on the upright.
The published data for this model lists usually we can send goods of in 1-2.
- Part of the Measuring Tools range
- Supplied by Shaanxi Jiade Group Co., Ltd, Xi'an, China
- Trade terms FOB, CFR, CIF, payment TT 30% with order and 70% before shipment
- Manual, packing list and shipping documents included
Product Overview
What the Flexible Magnetic Base Stand Holder Does
Magnetic stand that uses a switchable permanent magnet for convenient mounting onto flat iron or steel surfaces.The arm can be hydraulically locked in any position using the knob on the upright.
Useful for holding dial indicators or dial test indicators during alignment operations.
Permanent magnet operation with ON/OFF control.
V-grooved base for secure mounting on cylindrical surfaces.
Key Benefits
Why Workshops Buy This Machine
Keeps the Work In House
Operations that would otherwise be sent out stay on your floor, which is what removes parts shipped without measurable proof of dimension.
Parameters You Can Plan Around
The published data for this model lists usually we can send goods of in 1-2.
Documented and Supported
The machine ships with an operation manual and a named contact who answers on WhatsApp, so commissioning questions do not go unanswered.
Matched Tooling Available
Chucks, arbors, vises and measuring equipment from the same supplier, quoted with the machine instead of chased separately.
Application Scenarios
Where the Flexible Magnetic Base Stand Holder Earns Its Place
- Incoming inspection of machined parts
- Bore measurement during boring and honing
- Shop floor checks between operations
- Final inspection before packing
Scenarios are typical for measuring tools of this type. If your part is outside them, send the drawing and we will say plainly whether this model suits it.
Who It Is For
The Buyers This Machine Was Specified For
Problems It Solves
Three Situations This Machine Fixes
Subcontracting Delay
Sending this operation out adds days to every job. Running it in house on the Flexible Magnetic Base Stand Holder removes the queue you do not control.
Parts No Longer Available
When an original part cannot be bought, the only route left is to make or restore it, which needs the capacity this machine provides.
Unpredictable Quality
Work done on improvised equipment varies between operators. A purpose built machine with published parameters makes the result repeatable.
Technical Features
Features Listed by the Manufacturer
- V-grooved base for secure mounting on cylindrical surfaces.
- Ideal for holding lever indicators at any orientation on a machine tool for alignment operations.
- Flexible, strong, and precise rotary joints,can adjust any direction and location Powerful magnetic base, with on/off switch for magnet With high stability, it will be your ideal tool in the measurement of precision workpiece field.
- Designed with three joints Easy using for metalwork pieces Base Size(L x W x H) : Approx.
- Weight(kg) Base WCZ-1B 200 0.4 Magnetic WCZ-6F 355 1.26 Magnetic WCZ-6B 410 1.5 Magnetic FAQ: Q:How can we place the order ?
- A:Please place order online directly , or you can send us an inquiry , or check with our sales online, we will reply you within 12 hours.
Specifications
Published Parameter Table
| Usually we can send goods | in 1-2 |
|---|
Materials Manufacturing and Quality Control
How the Machine Is Built and Checked
Casting and Machining
Beds, columns and housings are machined in the group's production workshop on conventional and CNC equipment.
Assembly
Assembly is done in a dedicated workshop rather than on the production floor, which keeps swarf away from fitted surfaces.
Inspection
The inspection department checks components and assemblies before the machine goes to paint. Test records per machine are TBC on request.
Paint and Packing
Painting is done in house, then the machine is rust protected, crated and prepared for the container.
Certification scope for this model is marked TBC. We attach the certificates that actually apply to the machine and destination instead of publishing a blanket claim.
Customization Options
What Can Be Changed Before Production
- Motor voltage and frequency to match your supply, stated with the order
- Tooling and workholding packages selected for your first jobs
- Model variant chosen against your maximum workpiece size
- Documentation and marking requirements for your destination, TBC per country
Send a drawing of the part you need to produce. We select the model against that drawing rather than pushing the largest machine in the range.
Comparison With Other Models
Other Measuring Tools Models Worth Comparing
| Flexible Magnetic Base Stand Holder | Usually we can send goods in 1-2 · this page |
|---|---|
| Dial Indicator dial gauge indicator | Parameters supplied with quotation · compare |
| Dial Bore Gauge | Parameters supplied with quotation · compare |
| Internal outside micrometer | Parameters supplied with quotation · compare |
| Digital Vernier Caliper | Parameters supplied with quotation · compare |
Use Guide
Before and After the Machine Arrives
Check the Foundation
Confirm floor loading, levelling points and the space needed around the machine before the container arrives.
Power and Air
Match supply voltage and frequency to the machine data plate and provide the isolator and any compressed air the model needs.
Level and Run In
Level the machine, check the oil levels, then run the spindle or drive up through its speed range before cutting.
First Article and Service
Machine a test piece, measure it, and keep a service schedule from day one. Send us the measurement if something looks wrong.
Related Products
More From the Measuring Tools Range
Related Guides and Solutions
Read Before You Order
Answers
Flexible Magnetic Base Stand Holder Questions
What is the usually we can send goods of the Flexible Magnetic Base Stand Holder?
The manufacturer data for this model gives usually we can send goods in 1-2. The full parameter list for every variant is in the specification table on this page and is confirmed in writing with the quotation.
Can you help me select the right variant of the Flexible Magnetic Base Stand Holder?
Yes. Send the part drawing, the workpiece size and the output you need and our engineers propose the model that fits. If you already know the model code, quote it and we confirm availability.
What are the trade and payment terms?
We work on FOB, CFR, CIF terms. Payment is TT 30% with order and 70% before shipment, or irrevocable L/C at sight. Orders placed through our Alibaba account carry trade assurance cover up to USD 300,000.
How is the Flexible Magnetic Base Stand Holder packed for export?
The machine is cleaned, rust protected and fixed to a pallet or into a wooden case sized for that machine, then stuffed into a container or shipped break bulk when it is over height. Packing is confirmed before production starts.
What is the delivery time?
Delivery depends on the model and on stock at the time of order, so we confirm a firm date on the proforma invoice instead of quoting one standard figure for the whole catalogue.
Do you supply tooling and spare parts for the Flexible Magnetic Base Stand Holder?
Yes. Chucks, arbors, vises and consumables are listed in our accessories range, and wear parts for this machine can be quoted with the machine or shipped later.
Get a Price for the Flexible Magnetic Base Stand Holder
Tell us the destination port and the variant you need. You get a specification, packing dimensions and a price.