Turning
CK5225 Double Column Vertical CNC Lathe Machine
1.C52- Double Column vertical lathe is suitable for all sectors of the machining, it can be used for the outer cylinder, round-dimensional surface, end, grooving and cutting of rough and fine turning.
The published data for this model lists worktable diameter of mm 2250 2830 2830/3150 3200/3600 and range of table speeds of r/min 2-63 2-63 2-63 2-63.
- Model code CK5225
- Supplied by Shaanxi Jiade Group Co., Ltd, Xi'an, China
- Trade terms FOB, CFR, CIF, payment TT 30% with order and 70% before shipment
- Manual, packing list and shipping documents included
Product Overview
What the CK5225 Double Column Vertical CNC Lathe Machine Does
1.C52- Double Column vertical lathe is suitable for all sectors of the machining, it can be used for the outer cylinder, round-dimensional surface, end, grooving and cutting of rough and fine turning.
The vertical beam rail car and ram guideways super audio quenching treatment (HRC≥50), rail sliding surface laminating process (including the swash plate surface and the Iron Mask), precision products to maintain lasting, extending at least overhaul period more than 10 years.
Key Benefits
Why Workshops Buy This Machine
Keeps the Work In House
Operations that would otherwise be sent out stay on your floor, which is what removes long lead times on turned shafts and flanges sourced outside the shop.
Parameters You Can Plan Around
The published data for this model lists worktable diameter of mm 2250 2830 2830/3150 3200/3600 and range of table speeds of r/min 2-63 2-63 2-63 2-63.
Documented and Supported
The machine ships with an operation manual and a named contact who answers on WhatsApp, so commissioning questions do not go unanswered.
Matched Tooling Available
Chucks, arbors, vises and measuring equipment from the same supplier, quoted with the machine instead of chased separately.
Application Scenarios
Where the CK5225 Double Column Vertical CNC Lathe Machine Earns Its Place
- Turning shafts, pins and bushings to drawing
- Facing and boring flanges and end caps
- Thread cutting for repair parts that are no longer available
- Roll and axle reconditioning in maintenance shops
Scenarios are typical for turning of this type. If your part is outside them, send the drawing and we will say plainly whether this model suits it.
Who It Is For
The Buyers This Machine Was Specified For
Problems It Solves
Three Situations This Machine Fixes
Subcontracting Delay
Sending this operation out adds days to every job. Running it in house on the CK5225 Double Column Vertical CNC Lathe Machine removes the queue you do not control.
Parts No Longer Available
When an original part cannot be bought, the only route left is to make or restore it, which needs the capacity this machine provides.
Unpredictable Quality
Work done on improvised equipment varies between operators. A purpose built machine with published parameters makes the result repeatable.
Technical Features
Features Listed by the Manufacturer
- Feed system adopts AC servo motor drive leadscrew though gear box.
- Tow axis feed system all adopts leadscrew, both ends fixed and prestretching, advanced high rigidity.
- Machine adopts push button station, feed system configure handheld unit, easy to operate.
- The configuration of spindle driver and feed system can be interchangeable with general type and CNC type.
- Electrical Japanese Omron PLC control, electrical parts are made of ultra-high-quality components, specifications (CE standard) wiring technology, electrical machine with ultra-high reliability.
- Complete fitting configuration, users only need to prepare tools and gauges can be immediately put into production.
Specifications
Published Parameter Table
| Worktable diameter | mm 2250 2830 2830/3150 3200/3600 |
|---|---|
| Range of table speeds | r/min 2-63 2-63 2-63 2-63 |
| Max torque of work table | KN .m 63 63 63 100 |
| Travel of arm | mm 1000 1000 1000 1250 |
| Section of arm | mm 255×200 255×200 255×200 240×240 |
| Section of tool | mm 40×50 40×50 40×50 50×50 |
Materials Manufacturing and Quality Control
How the Machine Is Built and Checked
Casting and Machining
Beds, columns and housings are machined in the group's production workshop on conventional and CNC equipment.
Assembly
Assembly is done in a dedicated workshop rather than on the production floor, which keeps swarf away from fitted surfaces.
Inspection
The inspection department checks components and assemblies before the machine goes to paint. Test records per machine are TBC on request.
Paint and Packing
Painting is done in house, then the machine is rust protected, crated and prepared for the container.
Certification scope for this model is marked TBC. We attach the certificates that actually apply to the machine and destination instead of publishing a blanket claim.
Customization Options
What Can Be Changed Before Production
- Motor voltage and frequency to match your supply, stated with the order
- Tooling and workholding packages selected for your first jobs
- Model variant chosen against your maximum workpiece size
- Documentation and marking requirements for your destination, TBC per country
Send a drawing of the part you need to produce. We select the model against that drawing rather than pushing the largest machine in the range.
Comparison With Other Models
Other Turning Models Worth Comparing
| CK5225 Double Column Vertical CNC Lathe Machine | Worktable diameter mm 2250 2830 2830/3150 3200/3600 · this page |
|---|---|
| BV20-1/BV20L-1 Manual small bench lathe machine | Parameters supplied with quotation · compare |
| BVB25 3in1 multipurpose milling drilling machine | Range of inch threads 8-56T.P.I · compare |
| HQ800 Multi purpose type drilling milling machine | Parameters supplied with quotation · compare |
| Universal desktop lathe machine BL1224 | Parameters supplied with quotation · compare |
Use Guide
Before and After the Machine Arrives
Check the Foundation
Confirm floor loading, levelling points and the space needed around the machine before the container arrives.
Power and Air
Match supply voltage and frequency to the machine data plate and provide the isolator and any compressed air the model needs.
Level and Run In
Level the machine, check the oil levels, then run the spindle or drive up through its speed range before cutting.
First Article and Service
Machine a test piece, measure it, and keep a service schedule from day one. Send us the measurement if something looks wrong.
Related Products
More From the Turning Range
Related Guides and Solutions
Read Before You Order
Buying Guide
How to Choose a Metal Lathe for Your Shop
Swing, centre distance, spindle bore and drive type decide whether a lathe fits your work. Here is how to read those four figures before you compare prices.
SolutionMachine Shop Start Up Package
The four processes a general job shop needs before it can quote most local work.
Answers
CK5225 Double Column Vertical CNC Lathe Machine Questions
What is the worktable diameter of the CK5225 Double Column Vertical CNC Lathe Machine?
The manufacturer data for this model gives worktable diameter mm 2250 2830 2830/3150 3200/3600. The full parameter list for every variant is in the specification table on this page and is confirmed in writing with the quotation.
Can you help me select the right variant of the CK5225 Double Column Vertical CNC Lathe Machine?
Yes. Send the part drawing, the workpiece size and the output you need and our engineers propose the model that fits. If you already know the model code, quote it and we confirm availability.
What are the trade and payment terms?
We work on FOB, CFR, CIF terms. Payment is TT 30% with order and 70% before shipment, or irrevocable L/C at sight. Orders placed through our Alibaba account carry trade assurance cover up to USD 300,000.
How is the CK5225 Double Column Vertical CNC Lathe Machine packed for export?
The machine is cleaned, rust protected and fixed to a pallet or into a wooden case sized for that machine, then stuffed into a container or shipped break bulk when it is over height. Packing is confirmed before production starts.
What is the delivery time?
Delivery depends on the model and on stock at the time of order, so we confirm a firm date on the proforma invoice instead of quoting one standard figure for the whole catalogue.
Do you supply tooling and spare parts for the CK5225 Double Column Vertical CNC Lathe Machine?
Yes. Chucks, arbors, vises and consumables are listed in our accessories range, and wear parts for this machine can be quoted with the machine or shipped later.
Get a Price for the CK5225 Double Column Vertical CNC Lathe Machine
Tell us the destination port and the variant you need. You get a specification, packing dimensions and a price.