3 Section Trekking Poles for Mountain Climbing MW1043F1
A three-section flick-lock pole for mountain climbing and Nordic walking, offered as a pair or as a single hiking staff and available with adjustability, foldability, shock absorption and different locking mechanisms. The right length is the one that puts a 90-degree bend in the elbow with the tip on the ground, which is the sizing rule the range is built around.
Who It Is For
Retailers who want to offer both the pair and the single-staff configuration from one product family.
The Problem It Solves
Single-staff walkers and pole-pair hikers are normally served by two different suppliers with two different finishes.
Technical Features
- Single or double: You’ll start by choosing between a pair of trekking poles or a single hiking staff
- Find the right length: You’re aiming for a 90-degree bend at your elbow when pole tips touch the ground
- Choose features: Adjustability, foldability, shock absorption, weight and locking mechanisms (for adjustable poles) are just some of the features and options that will guide your buying choice
- Learn tips for using poles: Knowing a few handy tips, like how to use poles to get around obstacles in the trail, will get you on your way
Specifications
| Material | Aluminum 7075, also accept aluminum 6061, carbon file pole |
|---|---|
| Handle | EVA grip |
| Strap | Adjustable length Strap, can change to the large glove |
| Lock | Flick lock |
| Tip | Tungsten with pad, basket |
| Diameter | 16-14-12mm |
| Telescopic Length | 65-135cm |
| Length | You're aiming for a 90-degree bend at your elbow when pole tips touch the ground. Choose |
| Color | As your request, customized color is acceptable |
| Finish | Anodization, painted |
| MOQ | 300pcs |
| Individual Packing | 1pc per PE bag, or 1pc per drawstring bag, or as your request |
| Delivery Time | 25days |
All 13 figures above come from the supplier production sheet for this model. Nothing on this table is estimated.
Where the 3 Section Trekking Poles for Mountain Is Used
Taken from the use cases named in the supplier data for this model, which lists 4 of them, not from a category template.
- Hiking and Day Walks
- Trekking and Backcountry Routes
- Skiing and Snow Sports
- Boating Kayaking and Water Sports
How the Trekking Poles Options Compare
The honest trade-offs around Aluminum 7075, also accept aluminum 6061, carbon file pole, so you can place the 3 Section Trekking Poles for Mountain Climbing correctly in your own range.
| 80% carbon shafts | Lightest over a long day and warmer in the hand below freezing. |
|---|---|
| 7075 aluminium | Higher impact tolerance if a pole is trapped between rocks. |
| 6061 aluminium | The value tier, heavier and more prone to bending under load. |
| Fixed wooden staffs | No adjustment, no packed size advantage, no accessory fit. |
Getting the Most Out of It
- 1Avoid pinch loads
Carbon is stronger in line than across it. Do not lever a jammed pole sideways out of rock.
- 2Set the length before the climb
Shorten for ascents and lengthen for descents at the change of gradient, not halfway down.
- 3Keep the locks clean
Grit in a lock scores a carbon shaft. Rinse and dry the sections after wet or sandy routes.
- 4Inspect after impacts
Carbon fails visibly. Check for splintering or whitening after a fall before the next outing.
- 5Store extended
Store the sections open and dry so moisture does not sit inside the tube joints.
How This Product Is Made and Checked
Mango is a shareholder in the partner factory that builds this item, which is why the four checks below are decisions we make rather than requests we pass on. The catalogued finish for this model is Anodization, painted.
- Approved Sample
The sample you sign off for the 3 Section Trekking Poles for Mountain Climbing MW1043F1 becomes the written production standard for the whole run.
- Material Check
Incoming stock is confirmed as Aluminum 7075, also accept aluminum 6061, carbon file pole against the quotation sheet before cutting or cropping begins.
- In-Line Check
Layup finish, ferrule bonding and lock seating are checked on the carbon shafts as the batch runs.
- Finished Goods Check
Shaft weight, lock hold and finish are compared against the approved sample, then packing is verified.
What Can Be Changed on This Model
Colour
Catalogued as As your request, customized color is acceptable. Anodised or painted metalwork is matched to a Pantone reference.
Branding
Laser marking or pad printing on the shaft, plus a printed carry bag.
Size and Build
Catalogued at 65-135cm. Customised sizes are quoted on most models in this range and confirmed before production.
Packing
1pc per PE bag, or 1pc per drawstring bag, or as your request. Carton marks follow your export specification.
Other Models in This Range
Buying Guides Worth Reading First
Questions About This Product
What is the minimum order quantity for the 3 Section Trekking Poles for Mountain Climbing MW1043F1?
The catalogued minimum for this model is 300pcs. If you need a smaller first run to test the market, say so when you write to us and we will quote it.
What material is this model made from?
This model is produced in Aluminum 7075, also accept aluminum 6061, carbon file pole. Alternative shells, alloys or finishes can be quoted where the pattern allows it.
What size is it and can it be changed?
The catalogued size is stated in the specification table above. Customised sizes are available on most models in this range, confirmed on the quotation sheet before production.
Can we put our own brand on it?
Yes. On the 3 Section Trekking Poles for Mountain Climbing MW1043F1 the branding routes are laser marking or pad printing on the shaft or frame, an anodised or painted finish to your Pantone reference, and a printed carry or drawstring bag. Artwork and placement are confirmed on the quotation sheet before the sample is made.
How long will production take?
Sample lead time is typically three to fifteen days. Production lead time for this item is 25days.
What cover is there if a unit fails?
A one-year limited warranty runs from delivery on the 3 Section Trekking Poles for Mountain Climbing MW1043F1, as it does on everything Mango ships. Within that period a lock, ferrule or frame that fails through no fault of the user is answered with a replacement or a refund.
Get a Quotation for the 3 Section Trekking Poles for Mountain Climbing
Tell us the quantity against a catalogued minimum of 300pcs, the colour and the market. A quotation sheet comes back with unit price, Aluminum 7075, also accept aluminum 6061, carbon file pole, logo placement, packing and a 25days lead time.