Stainless Steel Bands and Buckles

Stainless Steel Strapping Tool

Stainless steel strapping tool also named steel strapping crimper,it is used to install stainless steel banding in width 1.2-20mm.

  • Stainless Steel Strapping Tool Description of Stainless steel strapping tool Stainless steel strapping tool also named steel strapping crimper,it is
Request A Quote Email Us Request A Sample
GroupABC Accessories
CategoryStainless Steel Bands and Buckles
StandardsIEC and GB
CustomisationOEM and non standard accepted
Stainless Steel Strapping Tool
OverviewSpecificationsGalleryOrderingFAQRelated

Overview

Stainless Steel Strapping Tool Description

Description of Stainless Steel Strapping Tool

Stainless steel strapping tool also named steel strapping crimper, it is used to install stainless steel banding in width 1.2-20mm.Stainless steel strapping tool is developed for tension the stainless steel banding and mounting the fittings on wooden,concrete or metal poles. Application scenarios are pipe bundling, communication product securement, marine/construction projects.

Material

The stainless steel strapping tool is made of stainless steel.

Size: 325x210mm /12.8×8.27 inch

Stainless Steel Strapping Tool Part

1.The operation knob is coordinated and properly matched.

2.The tightening handle and the adjustment knob are combined to fix the cable tie.

3.The cutter head control knob cooperates with the sharp special cutter head.

4.Blue, epoxy powder coated finish resists corrosive elements

Advantage

1.Easy to use.Use correct band size and buckle for your project by measuring length from roll band (or use a pre-cut clamp) and installing a buckle.

2.Flexible.This tensioner can realize tightening different irregular shape pipes or concretes.

3.Wear-resistant and resistant to corrosion,Radiation and fire-retardant.

4.Have long durability and extended service life.

5.Fit your stainless steel banding.Banding tool strapping tensioners tool works with stainless steel and galvanized carbon steel bands; Accepts band sizes 1/5-inch to 3/4-inch (4.76mm to 19mm); 0.4mm to 0.8mm thickness strap; Most commonly used sizes are 1/2-inch, 5/8-inch, 3/4-inch; Band and buckle not included.

6.High strength.Tensions over 2,000 pounds (907 kg) of force.Drop forged with epoxy powder-coat finish for maximum strength and longevity that resists rust and corrosion.

The stainless steel strapping tool has superior rust corrosion resistance and trouble proofed design, which strictly clamped the band and buckles.The cut knife withholds plenty of cutting cycles and guarantee long service period of tool.To complete the installation there is only one tool needed.

Catalogue download here

Specifications

Codes Ranges and Dimensions

Figures below are reproduced from the CROP catalogue for this item.

PRODUCT CODESTTA1(NORMAL)STTA2(HEAVY DUTY)
Max.band width(mm)＜20＜20
Max.band thickness(mm)＜1.2＜1.2

Ordering and Support

From Enquiry To Delivered Order

1

Send The Requirement

Item code, conductor or cable size and quantity, or a drawing and a photograph for a non standard part.

2

Quotation

Price, packing, carton quantity and lead time are confirmed against the catalogue reference.

3

Sample or Tooling

Samples are sent for approval. Parts that need a new mould go through the in house mould division.

4

Production and Shipment

Production to IEC and GB standards, then packing and shipment on the agreed terms.

Answers

Frequently Asked Questions

How do I choose the right size?
Match your conductor or cable size against the range column in the specification table on this page, then quote the code on that row. If the size falls between two rows, send both figures with your enquiry and the correct item will be confirmed.
Is Stainless Steel Strapping Tool available as a sample before a production order?
Yes. Ask for a sample by WhatsApp on 0086 138 6832 9796 or by email and the item, the packing and the lead time for a full order will be confirmed together.
Which standards do CROP products follow?
All CROP products are made to comply with IEC and GB standards. Where a project calls for a national or utility specification, send the standard reference with your enquiry and the matching item will be quoted.
Can items be produced to our own drawing?
Yes. Non-standard and OEM orders are part of the normal range. Send the drawing, a picture, the weight or the written specification to [email protected] or by WhatsApp and a quotation will be prepared against your requirement. CROP also runs its own mould division for plastic, SMC and stamped parts.
How do I obtain the PDF catalogue?
The catalogue is issued on request. Ask for the section you need by email or WhatsApp on 0086 138 6832 9796 and the PDF will be sent back to you. The catalogue page lists every section that is available.

Next Step

Get A Price For Stainless Steel Strapping Tool

Send the code, the size and the quantity. Drawings for non standard versions are welcome.

Chat on WhatsApp Email Us
Chat on WhatsApp