Preformed Line Fittings

Preformed Dead End Clamp, NL

Name: Preformed Dead End Clamp, NL
Brand: CROP

Peformed dead end clamp is intended for a single (one-time) use.Heliformed tension clamp intended for use by trained craftspeople only.

Request A Quote Email Us Request A Sample

GroupTransmission and Distribution

CategoryPreformed Line Fittings

StandardsIEC and GB

CustomisationOEM and non standard accepted

Overview Specifications Gallery Ordering FAQ Related

Overview

Preformed Dead End Clamp, NL Description

Heliformed Dead End Clamp

NL

1.Preformed dead end clamp is intended for a single (one-time) use and for the specified application. 2.Heliformed tension clamp intended for use by trained craftspeople only. dead end clamp should not be used by anyone who is not familiar with and trained in the use of it. 3.When working in the area of energized lines with this product,extra care should be taken to prevent accidental electrical contact. 4.For proper performance and personal safety be sure to select the proper size with preformed Armor Rods and clamps according the conductors size before application. 5.Tension clamp are precision devices.To insure proper performance,they should be stored in cartons under cover and handled carefully. 6.The dead end clamp are simple installation,except the need the screwdriver to seperated the conductor ends,usually needn’t a ny other tools,just install by hand.

Preformed Dead End Clamp for ACSR

Heliformed Tension Clamp for AAAC

1KV Insulated Helical Conductor Tension Clamp

10KV Insulated Helical Conductor Tension Clamp

Specifications

Codes Ranges and Dimensions

Figures below are reproduced from the CROP catalogue for this item.

Model	Applicable type of guide wire(GB1179-83)	Reference length(mm)	Color code	Optional matching fittings
Applicablediameter of guide wire(mm)	ACSR(LGJ/LGJF)
NL-16/3	5.55	16/3	444	Brown	TC-05-B
NL-25/4	6.96	25/4	546	Yellow
NL-35/6	8.16	35/6	622	Red
NL-50/8	9.6	50/8	685	Yellow
NL-70/10	11.4	70/10	736	Blue
NL-95/15	13.61	95/15	876	Red	TC-07-B
NL-70/40	13.6	70/40	876
NL-95/20	13.87	95/20	876
NL-120/7	14.5	120/7	876
NL-120/20	15.07	120/20	889	Black	TC-10-B
NL-120/25	15.74	120/25	889
NL-150/8	16	150/8	889
NL-150/20	16.67	150/20	1016	Green
NL-150/25	17.1	150/25	1016
NL-150/35	17.5	150/35	1016
NL-185/10	18	185/10	1016
NL-185/25	18.9	185/25	1155	Orange
NL-185/30	18.88	185/30	1155
NL-210/10	19	210/10	1155
NL-185/45	19.96	185/45	1155
NL-210/25	19.98	210/25	1155
NL-210/35	20.68	210/35	1155
NL-240/30	21.6	240/30	1270	Blue	TC-10-B
NL-240/40	21.66	240/40	1270
NL-240/55	22.4	240/55	1700	Purple	TC-12-B
NL-300/15	23.01	300/15	1442	Blue	TC-10-B
NL-300/20	23.43	300/20	1442
NL-300/25	23.76	300/25	1620	Brown	TC-10-B
NL-300/40	23.94	300/40	1620
NL-300/50	24.26	300/50	1770	Brown	TC-12-B
NL-400/20	26.91	400/20	1860	Red	TC-12-B
NL-400/25	26.64	400/25	1860
NL-400/35	26.82	400/35	1860

Model	Applicable diameter of guide wire(mm)	Applicable type of guide wire(GB1179-83)AAC(LJ)	Reference length (mm)	Color code	Optional matching fittings
min.	max.
NL-16/LJ	4.62	5.16	16	406	Blue	TC-070B
NL-25/LJ	5.8	6.53	25	444	Orange
NL-35/LJ	7.35	8.26	35	622	Red
NL-50/LJ	8.27	9.25	50	685	Green
NL-70/LJ	10.4	11.68	70	736	Blue
NL-95/LJ	11.69	13.11	95	800	Orange
NL-120/LJ	13.12	14.66	120	876	Red
NL-150/LJ	14.67	16.59	150	889	Black
NL-185/LJ	16.6	18.77	185	1016	Green
NL-210/LJ	16.6	18.77	210	1016	Green
NL-240/LJ	18.78	21.26	240	1155	Orange
NL-300/LJ	21.27	24.05	300	1270	Blue
NL-400/LJ	24.06	27.2	400	1422	Brown
NL-500/LJ	27.21	30.78	500	1651	Orange	TC-10-B

Model	Applicable diameter of guide wire(mm)	Applicable wiremodel below 1KV GB12527-90	Applicable wiremodel below 10KV GB14049-93 thinner insulation	Reference length (mm)	Color code	Optional matching fittings
min.	max.
NL-10/JY-1KV	5.82	6.53	10		460	Orange	TC-05-B
NL-16/JY-1KV	6.55	7.34	16		530	Yellow
NL-25/JY-1KV	8.28	9.25	25		690	Green
NL-35/JY-1KV	9.26	10.39	35		690	Yellow
NL-50/JY-1KV	10.4	11.68	50		740	Blue
NL-70/JY-1KV	11.6	13.11	70	25	790	Orange
35
NL-95/JY-1KV	13.12	14.66		50	860	Purple
NL-120/JY-1KV	14.67	16.59	95	70	889	Blue	TC-07-B
120
NL-150/JY-1KV	16.6	18.77	150	95	980	Red
NL-185/JY-1KV	18.78	21.26	185	120	1016	Brown	TC-10-B
150
NL-240/JY-1KV	21.27	24.05	240	185	1016	Green
NL-300JYQ-10KV	24.06	27.2		240	1016	Black
300

Model	Applicable diameter of guide wire(mm)	Applicable wiremodel below 10KV GB14049-93 ordinary insulation	Reference length(mm)	Color code	Optional matching fittings
min.	max.
NL-10/JY-10KV	10.40	11.68	10	740	Blue	TC-05-B
NL-16/JY-10KV	11.69	13.11	16	790	Orange
NL-25/JY-10KV	13.12	14.66	25	860	Purple
NL-35/JY-10KV	14.67	16.59	35	889	Blue	TC-07-B
NL-50/JY-10KV	14.67	16.59	50	889	Blue
NL-70/JY-10KV	16.60	18.77	70	980	Red
NL-95/JY-10KV	18.78	21.26	95	1016	Brown
NL-120/JY-10KV	18.78	21.26	120	1016	Brown
NL-150/JY-10KV	21.27	24.05	150	1016	Green	TCB-10-B
NL-185/JY-10KV	24.06	27.20	185	1016	Black
NL-240/JY-10KV	24.06	27.20	240	1016	Black
NL-300/JY-10KV	27.21	30.78	300	1016	Purple

Product Images

Ordering and Support

From Enquiry To Delivered Order

Send The Requirement

Item code, conductor or cable size and quantity, or a drawing and a photograph for a non standard part.

Quotation

Price, packing, carton quantity and lead time are confirmed against the catalogue reference.

Sample or Tooling

Samples are sent for approval. Parts that need a new mould go through the in house mould division.

Production and Shipment

Production to IEC and GB standards, then packing and shipment on the agreed terms.

Answers

Frequently Asked Questions

How do I choose the right size?

Match your conductor or cable size against the range column in the specification table on this page, then quote the code on that row. If the size falls between two rows, send both figures with your enquiry and the correct item will be confirmed.

Is Preformed Dead End Clamp, NL available as a sample before a production order?

Yes. Ask for a sample by WhatsApp on 0086 138 6832 9796 or by email and the item, the packing and the lead time for a full order will be confirmed together.

Which standards do CROP products follow?

All CROP products are made to comply with IEC and GB standards. Where a project calls for a national or utility specification, send the standard reference with your enquiry and the matching item will be quoted.

Can items be produced to our own drawing?

Yes. Non-standard and OEM orders are part of the normal range. Send the drawing, a picture, the weight or the written specification to [email protected] or by WhatsApp and a quotation will be prepared against your requirement. CROP also runs its own mould division for plastic, SMC and stamped parts.

How do I obtain the PDF catalogue?

The catalogue is issued on request. Ask for the section you need by email or WhatsApp on 0086 138 6832 9796 and the PDF will be sent back to you. The catalogue page lists every section that is available.

Next Step

Get A Price For Preformed Dead End Clamp, NL

Send the code, the size and the quantity. Drawings for non standard versions are welcome.

Chat on WhatsApp Email Us