Preformed Line Fittings

Preformed Armor Rod

Preformed armor rod is intended or use by trained craftspeople only.Heliformed armour rod for a single(one-time) use and for the specified application.

Armor Rods are intended to protect against bending,compression,abrasion, arc-over,and to provide repair. The degree of protection needed on a specific line depends upon a number of factors such as line design,temperature,tension,exposure to wind flow, and vibration history on similar constrution in the same area.As a general guide,the following recommendations may be adopted to the specific conditions. Armor Rods are recommended as minimum protection for clamp-type supports or suspensions. Line Guards are recommended as minmum protection for hand-tied spans.The use of supplementary damping devices,such as Spiral Vibration Dampers,should be considered whenconductor vibration is present or expected.

Request A Quote Email Us Request A Sample

GroupTransmission and Distribution

CategoryPreformed Line Fittings

StandardsIEC and GB

CustomisationOEM and non standard accepted

Overview Specifications Ordering FAQ Related

Overview

Preformed Armor Rod Description

Heliformed Armor Rod

Safety considerations 1.Preformed armor rod is intended for a single(one-time) use and for the specified application. 2.Heliformed armor rod is intended or use by trained craftspeople only.This product should not be used by anyone who is not farmiliar with and tranined in the use of if. 3.Whe working in the area of energized lines with this Product,extra care should be taken to prevent Accidental electrical contact. 4.For proper performance and personal Safety be sure to selectthe proper size Performed armor rods before application. 5.Preformed armor rods are precision devices.To insure proper performance,they should be stored in Cartons under cover and handled carefully. 6.The armor rod can use with much fitting.

Heliformed armor rod is used to protect the wire form vibration,clamp pressure stress,firction,arcing and all other esternal damages.Where the wire vibration is noy servere,helocal armour rod may protect wire from vibration,friction or other damags in short span lines.

Heliformed Armour Rod for ACSR

Heliformed Armour Rod for AAAC

Heliformed Armour Rod for Steel Conductor

Specifications

Codes Ranges and Dimensions

Figures below are reproduced from the CROP catalogue for this item.

Model	Applicable type of guide wire(GB1179-83) Steel core aluminum stranded wire LGJ/LGJF	Reference length of wire clamp(mm)	Monofil diameter (mm)	Color code
Model of wire	outer diameter
CAR-35/6	35/6	8.16	1100	3	Red
CAR-50/8	50/8	9.60	1270	3	Black
CAR-95/15	95/15	13.61	1400	3.6	Yellow
CAR-95/20	95/20	13.87	1400	3.6	Yellow
CAR-95/55	95/55	16.00	1500	3.6	Red
CAR-120/7	120/7	14.50	1400	3.6	White
CAR-120/20	120/20	15.07	1400	3.6	Brown
CAR-120/25	120/25	15.74	1400	3.6	Red
CAR-120/70	120/70	18.00	1800	4.6	Brown
CAR-150/8	150/8	16.00	1500	3.6	Red
CAR-150/20	150/20	16.67	1500	3.6	Blue
CAR-150/25	150/25	17.10	1500	3.6	Blue
CAR-150/35	150/35	17.50	1500	3.6	Green
CAR-185/10	185/10	18.00	1800	4.6	Yellow
CAR-185/25	185/25	18.90	1800	4.6	White
CAR-185/30	185/30	18.88	1800	4.6	Green
CAR-185/45	185/45	19.60	1800	4.6	Orange
CAR-210/10	210/10	19.00	1800	4.6	White
CAR-210/25	210/25	19.98	1800	4.6	Orange
CAR-210/35	210/35	20.38	1800	4.6	Purple
CAR-210/50	210/50	20.86	1800	4.6	Purple
CAR-240/30	240/30	21.60	1900	4.6	Blue
CAR-240/40	240/40	21.66	1900	4.6	Blue
CAR-240/55	240/55	22.40	1900	4.6	Green
CAR-300/15	300/15	23.01	2000	6.3	Black
CAR-300/20	300/20	23.43	2000	6.3	Black
CAR-300/25	300/25	23.76	2000	6.3	White
CAR-300/40	300/40	23.94	2000	6.3	White
CAR-300/50	300/50	24.26	2000	6.3	White
CAR-300/70	300/70	25.20	2000	6.3	Orange
CAR-400/20	400/20	26.91	2200	6.3	Blue
CAR-400/35	400/35	26.82	2200	6.3	Blue
CAR-400/50	400/50	27.63	2200	6.3	Green
CAR-400/65	400/65	28.00	2200	6.3	Yellow
CAR-400/95	400/95	29.14	2500	6.3	White
CAR-500/35	500/35	30	2500	6.3	Orange
CAR-500/45	500/45	30	2500	6.3	Orange
CAR-500/65	500/65	30.96	2500	6.3	Purple
CAR-630/45	630/45	33.6	2500	7.8	Yellow
CAR-630/55	630/55	34.23	2500	7.8	Black
CAR-630/80	630/80	34.82	2500	7.8	Black
CAR-800/55	800/55	38.4	2500	7.8	Red
CAR-800/70	800/70	38.58	2500	7.8	Blue
CAR-800/100	800/100	38.98	2500	7.8	Yellow

Model	Applicable diameter of guide wire (mm)	Applicable type of guide wire (GB1179-83) Aluminum stranded wire LJ	Reference length of wire clamp (mm)	Color code
Min.	Max.
CAR-50L	8.81	9.30	50	1210	Green
CAR-70L	10.52	11.07	70	1320	Brown
CAR-95L	12.47	13.23	95	1370	Green
CAR-120L	14.01	14.86	120	1520	Red
CAR-150L	15.40	16.00	150	1500	Purple
CAR-185L	17.30	17.86	185	1730	Blue
CAR-210L	17.87	18.80	210	1830	Green
CAR-240L	20.69	21.46	240	1930	Red
CAR-300L	21.47	23.04	300	1980	Blue
CAR-400L	25.82	26.29	400	2380	Brown

Model	Applicable diameter of guide wire (mm)	Applicable type of guide wire (GB1179-83) Steel stranded wire GJ	Reference length of wire clamp (mm)	Color code
Min.	Max.
CAR-25G	6.20	6.58	25	1020	Yellow
CAR-35G	7.37	7.82	35	1110	Red
CAR-50G	8.81	9.47	50	1210	Orange
CAR-70G	10.52	11.07	70	1320	Green
CAR-80G	11.09	11.76	80	1371	Yellow
CAR-90G	11.77	12.46	90	1400	Brown
CAR-95G	12.47	13.23	95	1420	Blue
CAR-100G	12.47	13.23	100	1420	Blue

Ordering and Support

From Enquiry To Delivered Order

Send The Requirement

Item code, conductor or cable size and quantity, or a drawing and a photograph for a non standard part.

Quotation

Price, packing, carton quantity and lead time are confirmed against the catalogue reference.

Sample or Tooling

Samples are sent for approval. Parts that need a new mould go through the in house mould division.

Production and Shipment

Production to IEC and GB standards, then packing and shipment on the agreed terms.

Answers

Frequently Asked Questions

How do I choose the right size?

Match your conductor or cable size against the range column in the specification table on this page, then quote the code on that row. If the size falls between two rows, send both figures with your enquiry and the correct item will be confirmed.

Is Preformed Armor Rod available as a sample before a production order?

Yes. Ask for a sample by WhatsApp on 0086 138 6832 9796 or by email and the item, the packing and the lead time for a full order will be confirmed together.

Which standards do CROP products follow?

All CROP products are made to comply with IEC and GB standards. Where a project calls for a national or utility specification, send the standard reference with your enquiry and the matching item will be quoted.

Can items be produced to our own drawing?

Yes. Non-standard and OEM orders are part of the normal range. Send the drawing, a picture, the weight or the written specification to [email protected] or by WhatsApp and a quotation will be prepared against your requirement. CROP also runs its own mould division for plastic, SMC and stamped parts.

How do I obtain the PDF catalogue?

The catalogue is issued on request. Ask for the section you need by email or WhatsApp on 0086 138 6832 9796 and the PDF will be sent back to you. The catalogue page lists every section that is available.

Next Step

Get A Price For Preformed Armor Rod

Send the code, the size and the quantity. Drawings for non standard versions are welcome.

Chat on WhatsApp Email Us