CuAl10Ni5Fe4 — C63000
CuAl10Ni5Fe4–UNS.C63000 Aluminum Nickel Bronze Alloy is a special high strength copper aluminum alloy containing 81% copper, 10% aluminum, 5% nickel, 4% iron
CuAl10Ni5Fe4 — C63000
CuAl10Ni5Fe4–UNS.C63000 Aluminum Nickel Bronze Alloy is a special high strength copper aluminum alloy containing 81% copper, 10% aluminum, 5% nickel, 4% iron, which is an excellent choice for applications involving heavy loads, abrasive wear resistant, friction, abrasive wear and corrosion. The addition of nickel increases the alloys strength without diminishing its excellent ductility, toughness and corrosion resistance. Typical applications for C63000 nickel aluminum bronze included aircraft landing gear components strut bearings, main pistons, trunnion bearings and similar vital components.
Where C63000 Is Used
Typical end uses published by ALB for this grade.
Plumbing
Faucets
Industrial
Hydraulic Bushings for Earth Moving Equipment, Corrosion Resistant Articles, Bushings, Bearings, Heat Exchanger Flanges, Heat Exchanger Headers, Tanks, Valve Balls, Structural Members, Pump Shafts, Aircraft Parts, Valve Guides, Plunger Tips, Welded Piping Systems, Balls, Gears, Cams, Pump Parts, Shafting, Condenser Tube for Power Stations and Desalting Units, Valve Seats
Marine
Pump Parts, Bolts, Nuts, Propellers, Ship Propellers
Specifications And Material Data
| Al | 8.50-11.00% |
|---|---|
| Fe | 2.00-5.00% |
| Ni | 4.00-6.00% |
| Mn | 1.50% Max. |
| Sn | 0.20% Max. |
| Zn | 0.30% Max. |
| Cu | Balance |
Copper plus additions equal 99.50% minimum.
| Specific Gravity | 7.58 g/cm3 |
|---|---|
| Coefficient of Thermal Expansion per °C | 16.20 x 10-6 (20-300°C) |
| Electrical Conductivity (% IACS) | 7% @ 68 F |
| Thermal Conductivity | 22.60 Btu · ft/(hr · ft2·oF)at 68F |
| Modulus of Elasticity in tension | 17500 ksi |
1). the units are based upon US Customary. 2). the typical physical properties apply to age hardened products.
Sizes And Product Forms
Available Sizes
Custom Diameter & Sizes, Random Mill lengths
Available Products And Forms
Round bars, Flat bars, Square bars, Rectangular bars, Hexagon bars
Custom shapes are available upon request.
International Specification
| Rods/Bars | UNS.C63000, CDA630, ASTM B150, B124 |
|---|---|
| European Standards | CuAl10Ni5Fe4, DIN.2.0966, DIN17665, CA104 |
Unless otherwise specified, material will be produced to DIN & RWMA.
Abbreviations
- ASTM — American Society for Testing and Materials
- RWMA — Resistance Welder Manufacturers' Association
Tempers And Mechanical Data
The detailed Mechanical Properties will be available on request from customers.
Frequently Asked Questions
Answers drawn from the ALB technical data for this page.
What is the chemical composition of C63000?
C63000 is supplied to the following nominal composition:
- Al: 8.50-11.00%
- Fe: 2.00-5.00%
- Ni: 4.00-6.00%
- Mn: 1.50% Max.
- Sn: 0.20% Max.
- Zn: 0.30% Max.
- Cu: Balance
What are the typical physical properties of C63000?
Typical values published by ALB for C63000:
- Specific Gravity: 7.58 g/cm3
- Coefficient of Thermal Expansion per °C: 16.20 x 10-6 (20-300°C)
- Electrical Conductivity (% IACS): 7% @ 68 F
- Thermal Conductivity: 22.60 Btu · ft/(hr · ft2·oF)at 68F
- Modulus of Elasticity in tension: 17500 ksi
Which international specifications does C63000 meet?
- Rods/Bars: UNS.C63000, CDA630, ASTM B150, B124
- European Standards: CuAl10Ni5Fe4, DIN.2.0966, DIN17665, CA104
Can you supply mechanical property data for C63000?
The detailed Mechanical Properties will be available on request from customers.
Which product forms and sizes are available?
Custom Diameter & Sizes, Random Mill lengths Round bars, Flat bars, Square bars, Rectangular bars, Hexagon bars Custom shapes are available upon request.
How do I request a quotation?
Email the grade, temper, dimensions and quantity to [email protected]. Unless otherwise specified, material is produced to ASTM.
Quote C63000 To Your Specification
Send grade, temper, dimensions and quantity. Custom shapes are available on request.