CuAl10Fe3 — C62300
CuAl10Fe3 – UNS.C62300 Aluminum Bronze Alloys, which recommended for medium-duty applications involving wear and fatigue, especially where high ductility is required for cold working
CuAl10Fe3 — C62300
CuAl10Fe3 – UNS.C62300 Aluminum Bronze Alloys, which recommended for medium-duty applications involving wear and fatigue, especially where high ductility is required for cold working, C62300 and C62400 aluminum bronze applications include valve and pump components for industrial process streams, as well as for marine equipment, high strength fasteners and pole line hardware.
Where C62300 Is Used
Typical end uses published by ALB for this grade.
Fasteners
Nuts, Bolts
Industrial
Cams, Bushings, Bearing retainer Cages, Gears, Bearing Races, Valve Stems, Worm Gears, Valve Guides, Valve Seats, Bearing, Pump Rods, sleeve bearings
Marine
Marine Hardware
Specifications And Material Data
| Al | 8.50-10.00% |
|---|---|
| Fe | 2.00-4.00% |
| Mn | 0.50% Max. |
| Ni | 1.00% Max. |
| Si | 0.25% Max. |
| Sn | 0.60% Max. |
| Cu | Balance |
Copper plus additions equal 99.50% minimum.
| Specific Gravity | 7.70 g/cm3 |
|---|---|
| Coefficient of Thermal Expansion per °C | 16.20 x 10-6 (20-300°C) |
| Electrical Conductivity (% IACS) | 12 % @ 68 F |
| Thermal Conductivity | 31.0 Btu · ft/(hr · ft2·oF)at 68F |
| Modulus of Elasticity in tension | 17000 ksi |
1). the units are based upon US Customary. 2). the typical physical properties apply to age hardened products.
Sizes And Product Forms
Available Sizes
Custom Diameter & Sizes, Random Mill lengths
Available Products And Forms
Round bars, Flat bars, Square bars, Rectangular bars, Hexagon bars
Custom shapes are available upon request.
International Specification
| Rods/Bars | UNS.C62300, CDA623, ASTM B150, B124 |
|---|---|
| European Standards | CuAl9Fe3, DIN.2.0936, CW306G to EN ，CA106 |
Unless otherwise specified, material will be produced to DIN & RWMA.
Abbreviations
- ASTM — American Society for Testing and Materials
- RWMA — Resistance Welder Manufacturers' Association
Tempers And Mechanical Data
The detailed Mechanical Properties will be available on request from customers.
Frequently Asked Questions
Answers drawn from the ALB technical data for this page.
What is the chemical composition of C62300?
C62300 is supplied to the following nominal composition:
- Al: 8.50-10.00%
- Fe: 2.00-4.00%
- Mn: 0.50% Max.
- Ni: 1.00% Max.
- Si: 0.25% Max.
- Sn: 0.60% Max.
- Cu: Balance
What are the typical physical properties of C62300?
Typical values published by ALB for C62300:
- Specific Gravity: 7.70 g/cm3
- Coefficient of Thermal Expansion per °C: 16.20 x 10-6 (20-300°C)
- Electrical Conductivity (% IACS): 12 % @ 68 F
- Thermal Conductivity: 31.0 Btu · ft/(hr · ft2·oF)at 68F
- Modulus of Elasticity in tension: 17000 ksi
Which international specifications does C62300 meet?
- Rods/Bars: UNS.C62300, CDA623, ASTM B150, B124
- European Standards: CuAl9Fe3, DIN.2.0936, CW306G to EN ，CA106
Can you supply mechanical property data for C62300?
The detailed Mechanical Properties will be available on request from customers.
Which product forms and sizes are available?
Custom Diameter & Sizes, Random Mill lengths Round bars, Flat bars, Square bars, Rectangular bars, Hexagon bars Custom shapes are available upon request.
How do I request a quotation?
Email the grade, temper, dimensions and quantity to [email protected]. Unless otherwise specified, material is produced to ASTM.
Quote C62300 To Your Specification
Send grade, temper, dimensions and quantity. Custom shapes are available on request.