Thermostat Assembly for VW & Audi OEM 03L121111S

Product Overview

A Thermostat Housing Assembly for Audi vehicles, held against OEM 03L121111S. In service the part carries the wax element, housing, seals and — on mapped units — the heater and temperature sensor that govern warm-up. In service the part carries the wax element, housing, seals and — on mapped units — the heater and temperature sensor that govern warm-up. When it fails it usually shows leaking sensor bosses and elements that stick part open, and the driver sees a gauge that never settles in the normal band, higher fuel consumption and thermostat fault codes. The part belongs to a cooling-system catalogue of more than 4000 types, which is the practical reason buyers consolidate a mixed pallet with us rather than splitting it across suppliers.

The source photograph for this reference is low resolution. A higher-resolution image can be sent by email on request.

Key Benefits

• Matched to how the part actually fails — Leaking sensor bosses and elements that stick part open are the reasons this reference is bought, so those are the features checked before packing.
• Aftermarket buyers, not one-off retail — Pricing and packing are set up for distributors and workshop chains buying by the carton, not for single-piece retail.
• One reference set on every document — OEM 03L121111S appears on the quotation, the packing list and the carton label, so a warehouse can check a delivery without opening the box.
• Mixed pallets instead of single lines — A cooling-system range of more than 4000 types means a slow-moving line can travel with fast movers instead of being ordered on its own.

Application Scenarios

Breakdown repair

The vehicle is off the road and the part has to be right the first time, which makes the reference match the whole decision. With 03L121111S on the list the rest of the coolant control circuit can be priced at the same time.

Rebuild of an obsolete platform

The original reference is no longer produced, so the part is made from a supplied sample. With 03L121111S on the list the rest of the coolant control circuit can be priced at the same time.

Mixed container for a distributor

A quarterly container is filled across families — intake, charge air, coolant and thermostat lines — to a single packing list. This reference, 03L121111S, is bought for exactly that situation on Audi vehicles.

Who It Is For

• Fleet and bus operators — running Audi vehicles past warranty and buying cooling-system parts by the box to keep downtime short. What they need from 03L121111S is that it fits the Audi on the ramp today.
• Radiator and cooling specialists — rebuilding cooling systems and sourcing the hoses, flanges and housings for a platform in one go. They judge 03L121111S on one thing: whether it matches the part that came off.
• Exporters and consolidators — shipping mixed cooling-system pallets into Europe, the Middle East and South America. For them 03L121111S is a line on a shelf, not a project.

Problems It Solves

Reference mismatch

Visually identical parts carry different connector geometry between model years. Quoting OEM 03L121111S fixes the identity before money moves. For Audi buyers it is the difference between a stocked line and a credit note on 03L121111S.

Split ordering

Sourcing one hose from one supplier and the matching flange from another doubles the freight and the paperwork for the same repair. For Audi buyers it is the difference between a stocked line and a credit note on 03L121111S.

Parts that are no longer produced

When the original reference is dropped, the repair still exists. Sample-based production and mould development keep the line alive. For Audi buyers it is the difference between a stocked line and a credit note on 03L121111S.

Technical Features

The part serves the coolant control circuit and carries the wax element, housing, seals and — on mapped units — the heater and temperature sensor that govern warm-up. Material for this reference is confirmed per enquiry. The listed opening temperature is 92°C, which is the figure that has to match the vehicle.

Matched to the circuit the part serves. Confirm the compound against the reference before ordering, because visually identical parts are moulded in different materials.

Specifications

Values marked TBC are not stated on the source catalogue. They are confirmed in writing on the quotation rather than estimated here.

Comparison With the Alternatives

Use Guide

1. Confirm the reference

   Match OEM 03L121111S against the number on the part you removed. Do not match on outline alone.

2. Check the interfaces

   Compare the opening temperature, the housing outline and whether the unit is map-controlled before the vehicle is stripped further.

3. Inspect on arrival

   Look for transit damage on sealing faces and connectors. Confirm the compound against the reference before ordering, because visually identical parts are moulded in different materials.

4. Fit with the original clamp style

   Reuse the clamp type the Audi platform was designed around, and fit any seal or O-ring supplied with 03L121111S rather than carrying the old one over.

5. Pressure check before handover

   Refill, bleed the circuit and check for cracked plastic housings at working temperature before the vehicle leaves.