Metal Roller End Cap Housing MTR
The Metal Roller End Cap Housing MTR is a precision metal housing designed for use with roller shafts of 12 mm diameter and tubes with outer diameter of 32 mm and wall thickness of 1.0 mm or 1.5 mm. It is used to secure and support roller bearings in gravity, sprocket, O-belt, and poly-V roller systems. The housing is made from metal and is engineered to fit standard tube and shaft dimensions commonly used in industrial conveyor applications.
Product Overview
The Metal Roller End Cap Housing MTR is a precision metal housing designed for use with roller shafts of 12 mm diameter and tubes with outer diameter of 32 mm and wall thickness of 1.0 mm or 1.5 mm. It is used to secure and support roller bearings in gravity, sprocket, O-belt, and poly-V roller systems. The housing is made from metal and is engineered to fit standard tube and shaft dimensions commonly used in industrial conveyor applications.
Part of the Metal Roller Bearings MTR range, used in Conveyor OEMs and System Integrators.
Key Benefits
- Designed for 32 mm tube with 1.0 mm or 1.5 mm wall thickness and 12 mm shaft diameter
- Metal housing provides durability and consistent fit in high-load conveyor systems
- Supports free-running operation with precision bearings for smooth roller performance
- Reduces noise and vibration during operation due to precision fit and material quality
- Compatible with gravity, sprocket, O-belt, and poly-V roller systems
Application Scenarios
- Gravity roller conveyors in warehouse loading and unloading areas
- Sprocket roller systems in medium to heavy weight manufacturing lines
- O-belt and poly-V roller conveyors in electrical parts and mould manufacturing
- Assembly line transfer points requiring consistent roller alignment and support
- Conveyor sections where roller end caps must withstand repeated loading and impact
Who It Is For
- Conveyor system integrators building gravity and powered roller lines
- Material handling equipment builders sourcing standardized end caps
- Industrial distributors stocking roller components by tube and shaft size
- Manufacturers of sprocket, O-belt, and poly-V rollers requiring consistent end caps
- Production line builders needing reliable roller end caps for medium to heavy loads
Problems It Solves
- Rollers that wobble or misalign due to mismatched end cap and tube dimensions
- End caps that deform under load when using low-strength or non-standard materials
- Inconsistent roller performance caused by poor fit between end cap and shaft
- Frequent maintenance due to end caps failing under repeated impact or vibration
- Difficulty sourcing end caps that match both tube diameter and shaft size in one unit
Technical Features
- Engineered for 32 mm tube with 1.0 mm or 1.5 mm wall thickness and 12 mm shaft diameter
- Metal housing ensures structural integrity under repeated loading
- Precision fit designed to support roller bearings and maintain alignment
- Housing is fully integrated with the roller system for consistent performance
- Suitable for use in gravity, sprocket, O-belt, and poly-V roller configurations
Materials
- Metal housing for high strength and resistance to deformation under load
- Designed to work with standard steel, stainless steel, and PVC tubes
- Suitable for use in dry, wet, and washdown environments due to metal construction
Quality Control
- Dimensional check against 32 mm tube and 12 mm shaft specifications before packing
- Bore size verified to ensure smooth bearing fit and free rotation
- Visual inspection for burrs, cracks, or surface defects in the metal housing
- Fit test with sample tube and shaft to confirm alignment and stability
- Batch sampling to ensure consistency across production runs
Customization Options
- Special bore sizes available upon request for large volume orders
- Alternative tube or shaft dimensions can be considered with sufficient volume
- Material options beyond standard metal may be discussed for high-volume projects
Use Guide
- Verify that the tube outer diameter is 32 mm and wall thickness is 1.0 mm or 1.5 mm
- Confirm the shaft diameter is 12 mm before installation
- Ensure the housing is fully seated on the shaft and aligned with the tube
- Check for smooth rotation of the roller after installation
- Use only with compatible roller types such as gravity, sprocket, O-belt, or poly-V rollers
Specifications
| Model No | MTR-32X1.0-12 |
|---|---|
| Model No | MTR-32X1.5-12 |
| Tube Diameter | 32 mm |
| Tube Thickness | 1.0 mm or 1.5 mm |
| Shaft Diameter | 12 mm |
| Material | Metal |
| Application | Gravity, sprocket, O-belt, poly-V rollers |
Manufacturing Process
Step 1
Metal blanking and shaping to form the end cap housing
Step 2
Precision machining of bore and mounting surfaces to match shaft and tube dimensions
Step 3
Assembly of roller bearing into the housing
Step 4
Final inspection for dimensional accuracy and fit
Step 5
Packaging for shipment and storage
Compared With Other Options
| Plastic end caps | Metal housing offers higher strength and resistance to deformation under heavy or repeated loads |
|---|---|
| Standard stamped metal end caps | Precision machined metal housing ensures better fit and alignment with shaft and tube |
| Non-standard end caps from multiple suppliers | One consistent range of end caps matching tube and shaft size reduces sourcing complexity |
Metal Roller End Cap Housing MTR Questions
What tube and shaft sizes does the MTR-32X1.0-12 model fit?
It fits tubes with 32 mm outer diameter and 1.0 mm wall thickness, and shafts with 12 mm diameter.
Is there a version for 1.5 mm tube thickness?
Yes, the MTR-32X1.5-12 model is designed for 32 mm tubes with 1.5 mm wall thickness.
What material is the end cap housing made from?
The housing is made from metal, designed for durability and consistent fit in industrial applications.
Can I get custom bore sizes?
Yes, special bore sizes are available for large volume orders based on your specific requirements.
Which roller types are compatible with this end cap?
It is compatible with gravity, sprocket, O-belt, and poly-V rollers that use 12 mm shafts and 32 mm tubes.
Is the end cap suitable for washdown environments?
Yes, the metal construction allows use in wet or washdown areas, especially when paired with stainless steel shafts and tubes.
Get a Price for Metal Roller End Cap Housing MTR
Send the quantity and any material or surface option you need, and a quotation comes back against this model number.