metal frame HIPS roller track W-3222NPS
The W-3222NPS is a metal frame HIPS roller track with roller wheels made of HIPS, ABS or PE, sized Φ32.5mm x 22.5mm, mounted on a 45 carbon steel shaft, with a pitch of 36mm and a load capacity of 10 kg per roller wheel. It is designed for use in material handling equipment and warehouse systems where smooth, low-noise operation and resistance to rust are required. The frame is galvanized and has a width of 40 mm, height of 33 mm and thickness of 0.8 mm. The track height is 44 mm and the unit is available in yellow, white or black. The product is manufactured using Euroroll technology and can support up to 60 kg per meter of track length.
Product Overview
The W-3222NPS is a metal frame HIPS roller track with roller wheels made of HIPS, ABS or PE, sized Φ32.5mm x 22.5mm, mounted on a 45 carbon steel shaft, with a pitch of 36mm and a load capacity of 10 kg per roller wheel. It is designed for use in material handling equipment and warehouse systems where smooth, low-noise operation and resistance to rust are required. The frame is galvanized and has a width of 40 mm, height of 33 mm and thickness of 0.8 mm. The track height is 44 mm and the unit is available in yellow, white or black. The product is manufactured using Euroroll technology and can support up to 60 kg per meter of track length.
Part of the Plastic Roller Track range, used in Warehouse and Distribution Centres.
Key Benefits
- 10 kg load capacity per roller wheel with a pitch of 36 mm
- Galvanized metal frame resists rust and suits indoor and outdoor use
- Low noise and smooth running due to Euroroll technology
- Application temperature range down to minus 40 degrees Celsius
- Roller wheels made of HIPS, ABS or PE for different wear and load needs
- Lightweight frame and components reduce deck and system weight
- Available in yellow, white or black for visual integration with existing systems
Application Scenarios
- Conveyor lines in cold storage environments where low temperature operation is required
- Warehouse sorting systems where quiet operation reduces noise in shared workspaces
- Assembly lines with light to medium load transfer requiring smooth, consistent motion
- Material handling systems in food processing or clean environments where rust resistance is critical
- Customized conveyor sections where roller track is joined to form longer transfer paths
Who It Is For
- Conveyor system integrators building light-duty transfer and accumulation lines
- Material handling equipment builders requiring low-noise, rust-resistant tracks
- Warehouse automation contractors installing compact, lightweight roller tracks
- Industrial distributors stocking roller tracks by load rating and material type
- Production line builders needing tracks that operate smoothly at low temperatures
Problems It Solves
- Roller tracks that vibrate or make noise under light load due to poor bearing or material quality
- Rust formation in metal frames when used in humid or wet environments
- Track misalignment or uneven rolling caused by poorly machined or warped frames
- Lack of temperature tolerance in standard plastic rollers when used in cold storage
- Inconsistent load distribution across a track due to mismatched roller pitch or wheel size
Technical Features
- Roller wheel diameter of 32.5 mm and width of 22.5 mm with a 36 mm pitch
- 45 carbon steel shaft with a 3.5 mm diameter and 38 mm length
- Galvanized metal frame with dimensions 40 mm (width) x 33 mm (height) x 0.8 mm (thickness)
- Track height of 44 mm for consistent product ride height
- Roller wheel material available in HIPS, ABS or PE to suit different surface and load conditions
- Load capacity of 10 kg per roller wheel with a maximum of 60 kg per meter of track length
- Designed for use in environments down to minus 40 degrees Celsius
Materials
- HIPS roller wheels for general industrial use with good impact resistance
- ABS roller wheels for higher wear resistance and durability
- PE roller wheels for low friction and chemical resistance
- 45 carbon steel shafts for strength and consistent fit in the roller wheel
- Galvanized metal frame to resist rust and extend service life in humid or wet areas
Quality Control
- Each roller wheel checked for free rotation and smooth movement on the shaft
- Frame dimensions verified against the 40 x 33 x 0.8 mm specification
- Shaft diameter and length confirmed to match the 3.5 mm x 38 mm requirement
- Load capacity tested per roller wheel to ensure 10 kg rating is met
- Galvanization layer inspected for uniformity and coverage
Customization Options
- Roller wheel material selected between HIPS, ABS or PE based on application needs
- Roller wheel color selected from yellow, white or black
- Frame color can be matched to existing system aesthetics
- Length available in customized sizes to fit specific conveyor sections
- Other models in the W-3222 series available with different shafts, pitches or load ratings
Use Guide
- Ensure the roller track is mounted on a flat, stable surface to maintain consistent roller height
- Check that the 36 mm pitch matches the spacing of adjacent components or drive systems
- Use only the 10 kg per roller wheel load rating to avoid overloading and premature wear
- Choose HIPS for general use, ABS for higher durability, or PE for low friction and chemical resistance
- Install in environments where temperature does not exceed minus 40 degrees Celsius
- Use M6 bolts and nuts for installation through punched holes in the frame
- Install brake plates at low ends to stop rolling when needed, and use multiple plates if required
Specifications
| Model No | W-3222NPS |
|---|---|
| Roller Wheel Material | HIPS, ABS or PE |
| Roller Wheel Size | Φ32.5mm x 22.5mm |
| Shaft Material | 45 Carbon Steel |
| Shaft Diameter | 3.5 mm |
| Shaft Length | 38 mm |
| Pitch | 36 mm |
| Load Capacity | 10 kg per roller wheel |
| Frame Material | Galvanized Metal |
| Frame Width | 40 mm |
| Frame Height | 33 mm |
| Frame Thickness | 0.8 mm |
| Track Height | 44 mm |
| Application Temperature | Down to minus 40 degrees Celsius |
| Color Options | Yellow, White, Black |
Manufacturing Process
Step 1
Machining of the galvanized metal frame to precise dimensions
Step 2
Assembly of the roller wheels onto the 45 carbon steel shafts
Step 3
Insertion of the shafted rollers into the frame at 36 mm pitch
Step 4
Inspection of roller alignment and free rotation before packaging
Step 5
Final packing with protective film to prevent surface damage during transport
Compared With Other Options
| Plastic frame roller tracks | Metal frame provides higher rigidity and longer life under repeated loading, while plastic frames are lighter but more prone to deformation |
|---|---|
| Non-galvanized metal frames | Galvanized frame resists rust better in humid or wet environments, but may have a slightly higher initial cost |
| Fixed pitch roller tracks | 36 mm pitch allows consistent spacing for standard conveyor components, but other pitches are available in similar models |
| Higher load rated tracks | W-3222NPS suits 10 kg per roller, so heavier loads require a model with larger wheels or higher capacity |
| Standard plastic rollers | HIPS wheels offer better impact resistance than standard plastic rollers, but ABS or PE may be preferred for specific wear or chemical resistance |
metal frame HIPS roller track W-3222NPS Questions
What is the load capacity per roller wheel?
The load capacity is 10 kg per roller wheel, with a maximum of 60 kg per meter of track length.
What materials are available for the roller wheels?
Roller wheels are available in HIPS, ABS or PE, depending on the application requirements.
Is the frame galvanized?
Yes, the metal frame is galvanized to resist rust and suit indoor and outdoor use.
What is the pitch between rollers?
The pitch is 36 mm between each roller wheel.
Can the track be customized in length?
Yes, the length is available in customized sizes to fit specific conveyor sections.
What colors are available?
The roller track is available in yellow, white or black.
What is the operating temperature range?
The track can operate down to minus 40 degrees Celsius.
Get a Price for metal frame HIPS roller track W-3222NPS
Send the quantity and any material or surface option you need, and a quotation comes back against this model number.