Customized Mahcined Ball Transfer Unit FB-017
The FB-017 is a press mount ball transfer unit with a 25.4 mm diameter ball, rated for 15 kg working load and 20 kg maximum load. It is designed for use in flat, smooth surface handling applications where omnidirectional movement is required. The unit weighs 90 g and is available with a nylon, steel or stainless steel ball in a steel or stainless steel case. It mounts via a press fit into a 28 mm diameter hole in a deck plate.
Product Overview
The FB-017 is a press mount ball transfer unit with a 25.4 mm diameter ball, rated for 15 kg working load and 20 kg maximum load. It is designed for use in flat, smooth surface handling applications where omnidirectional movement is required. The unit weighs 90 g and is available with a nylon, steel or stainless steel ball in a steel or stainless steel case. It mounts via a press fit into a 28 mm diameter hole in a deck plate.
Part of the NJ LW FB Series range, used in Sheet Metal and Press Shops.
Key Benefits
- Carries 15 kg per unit in normal service and 20 kg at peak load
- Press mount fixes the unit into a hole in the deck plate for a flush fit
- 25.4 mm diameter ball allows smooth movement of flat trays and panels
- Nylon ball option protects painted or polished surfaces from marking
- Stainless steel ball and case option for wet or washdown environments
Application Scenarios
- Transfer points in packaging lines where flat trays need to be rotated or repositioned
- Feeding systems on processing machinery where small flat components are moved in any direction
- Assembly line stations where a fixture is turned by hand between operations
- Conveyor transfer decks between two lines running at right angles
- Workbenches with curved sections where omnidirectional movement is needed
Who It Is For
- Conveyor system integrators building transfer points with low load requirements
- Material handling equipment builders designing small-scale handling decks
- Industrial distributors stocking ball transfer units by load and size
- Assembly line builders needing compact, low-profile transfer units
Problems It Solves
- Flat trays or panels that jam when pushed across a fixed deck plate
- Transfer points where product must change direction without powered diverters
- Operators struggling to rotate or align small loads by hand at the end of a line
- Need for a compact unit that fits into a small deck area with minimal height
- Requirement for a unit that does not mark painted or polished surfaces
Technical Features
- 25.4 mm diameter ball for consistent contact with flat, smooth objects
- Press mount design with 28 mm mounting diameter for secure fit in deck plates
- Fine machined ball seat to maintain low rolling resistance under load
- Ball supplied in nylon, steel or stainless steel to match surface requirements
- Case supplied in steel or stainless steel for dry or wet environments
- Unit weight of 90 g for deck load and shipping calculations
Materials
- Nylon ball for non marking contact with painted or polished surfaces
- Carbon steel ball and case for general industrial decks
- Stainless steel ball and case for wet, washdown or corrosive areas
Quality Control
- Load capacity checked against the 15 kg rating before packing
- Ball rotation checked by hand for free movement in all directions
- Material grade confirmed against the ball and case option ordered
Customization Options
- Ball material selected between nylon, steel and stainless steel
- Case material selected between steel and stainless steel
- Other FB Series load ratings available where 15 kg is not the right size
Use Guide
- Divide the load by the number of units in contact to check the 15 kg per unit rating
- Keep peak and impact loading below the 20 kg maximum load figure
- Mount units on a flat deck plate so all balls sit at the same height
- Choose the nylon ball where the load surface must not be marked
- Choose stainless steel ball and case where the deck is washed down
Specifications
| Model No | FB-017 |
|---|---|
| Mounting | Press mount |
| Load Capacity | 15 kg |
| Max Load Capacity | 20 kg |
| Weight | 90 g |
| Ball Diameter | 25.4 mm |
| Mount Diameter | 28 mm |
| Ball Material | Nylon, steel or stainless steel |
| Case Material | Steel or stainless steel |
Manufacturing Process
Step 1
Machining of the case and ball seat
Step 2
Ball and support ball assembly
Step 3
Press fit preparation for mounting hole
Step 4
Load check and packing
Compared With Other Options
| Flange mount ball transfer units | Press mount is faster to install but harder to remove for service, while flange mount allows easier replacement |
|---|---|
| Lower rated FB Series units | The FB-017 suits 15 kg loads, so lighter applications are better served by a smaller unit that rolls with less effort |
| Plain conveyor rollers | Ball transfer units allow movement in any direction, while rollers only move product along one axis |
Customized Mahcined Ball Transfer Unit FB-017 Questions
What load can one FB-017 ball transfer unit carry?
The rated load capacity is 15 kg per unit and the maximum load capacity is 20 kg.
How is the FB-017 mounted?
It is a press mount unit, so it is pressed into a 28 mm diameter hole in the deck plate.
Which ball material should I choose?
Nylon for surfaces that must not be marked, carbon steel for general use and stainless steel for wet or washdown areas.
Is a stainless steel version available?
Yes, both the ball and the case can be supplied in stainless steel.
How much does the unit weigh?
Each FB-017 weighs 90 g, which is used when calculating deck weight and shipping.
Can I get other load ratings in the same series?
Yes, the FB Series covers other load ratings, so ask for the model that matches your load per unit.
Get a Price for Customized Mahcined Ball Transfer Unit FB-017
Send the quantity and any material or surface option you need, and a quotation comes back against this model number.