IK UK Series
Downward ball transfer units from 12 kg to 76 kg per unit, with load capacity from 200 kg to 500 kg, for transfer points where a load must move in any direction by hand on a fixed deck.
All 20 Models
Downward Ball Transfer Unit UK-76
Downward Ball Transfer Unit UK-51
Downward Ball Transfer Unit UK-50T
Downward Ball Transfer Unit UK-45T
Downward Ball Transfer Unit UK-38T
Downward Ball Transfer Unit UK-38
Downward Ball Transfer Unit UK-30T
Downward Ball Transfer Unit UK-25
Downward Ball Transfer Unit UK-19T
Downward Ball Transfer Unit UK-12
Downward Ball Transfer Unit IK-76B
Downward Ball Transfer Unit IK-51N
Downward Ball Transfer Unit IK-51B
Downward Ball Transfer Unit IK-38N
Downward Ball Transfer Unit IK-38B
Downward Ball Transfer Unit IK-25N
Downward Ball Transfer Unit IK-25B
Downward Ball Transfer Unit IK-22N
Downward Ball Transfer Unit IK-19N
Downward Ball Transfer Unit IK-19BProblems It Solves
- Loads that need to change direction at the end of a conveyor without a powered diverter
- Operators pushing heavy cartons, pallets or steel sheets across a fixed deck plate
- Transfer tables between two lines running at right angles to each other
- Decks in wet or washdown areas where a carbon steel unit would corrode
- Mixed product weights that require several load ratings on the same table
Who It Is For
- Conveyor builders designing transfer and rotation points into a line
- Sheet metal shops loading heavy blanks onto cutting and forming machines
- Material handling equipment makers building ball decks and transfer tables
- Industrial distributors stocking ball transfer units by load rating and mounting type
Why This Range
- Load capacity and maximum load capacity published for each model
- Nine model series so the load rating can be matched unit by unit
- Ball and case available in steel galvanized, steel chrome plated, or stainless steel
- Weight listed for each unit to support deck load calculations
- Fine machined and pressed housings supplied from the same catalogue
Application Scenarios
- Ball decks at the discharge end of a roller conveyor
- Transfer tables between two conveyor lines
- Sheet metal loading tables feeding a press brake or laser cutter
- Die change trolleys where a heavy tool is pushed sideways into position
- Assembly stations where a fixture is turned by hand between operations
IK UK Series Questions
How do I work out how many ball transfer units I need?
Divide the load by the number of units in contact with it and choose a model whose rated load capacity covers that figure, keeping peak loads under the maximum load capacity.
What is the difference between flange mount and press mount?
Flange mount units are bolted to the deck through a flange and can be removed for service, while press mount units are pressed into a hole in the deck and install faster.
Can I get stainless steel ball transfer units?
Yes, both the ball and the case can be supplied in stainless steel for wet and washdown areas.
Which ball material should I use on painted panels?
A nylon ball is used where the load surface must not be marked, and carbon steel where marking is not a concern.
Do you publish the weight of each unit?
Yes, load capacity, maximum load capacity and unit weight are listed on each product page so deck weight can be calculated.
Which series should I look at first?
Start from the load per unit, then choose the series that offers that rating in the mounting style your deck plate allows.
Quote IK UK Series Against Your Model List
Send the models and quantities you need, or the dimensions of the line you are building, and a quotation comes back on those figures.