Two ways to get the same look, with very different programme and cost profiles.
Mixed and poured in place, then ground and polished on site. The result is genuinely seamless across a floor.
It needs a specialist crew, curing time and a dust-tolerant site. On a fit-out with a short programme that is often the deciding constraint.
Terrazzo from our own production. See the Terrazzo range.
Produced and finished in the factory, then cut to size. The surface arrives finished, so there is no site grinding.
Joints exist, but chip pattern and colour are consistent between slabs of the same code.
Large continuous floors with time in the programme: poured.
Counters, vanities, wall cladding, table tops and any job on a fixed handover date: slab.
Our terrazzo runs from fine speckle to large chip patterns, so the same material can read as a quiet background or as the feature of a room.
How the three engineered surfaces differ in body, heat behaviour and where each one belongs in a project.
Thickness decides edge detail, handling weight and support requirements. Both are standard in our production.
The three textures we produce, and what each one does to colour, fingerprints and maintenance.
The order sequence we use, from first sample through to a loaded container.
What to tell an end client after installation, and what to keep away from the surface.
Three ways to specify white, and how to avoid the warm-cast problem on large areas.
Codes exist so the same slab can be produced twice. Here is how to use them properly.
What arrives at your yard, and what to confirm before the container is packed.
Yes. Email [email protected] with the application, the exposure conditions and the look you are after.
Free samples go to distributors, builders and countertop factories. Testing a physical sample beats any article, including this one.
Engineered quartz at 93% quartz content, artificial marble, terrazzo, porcelain, sintered stone and nano glass, all on our own site in Nanyang.
Send the application and the exposure conditions and we will tell you which surface fits.
