What to tell an end client after installation, and what to keep away from the surface.
Warm water, a soft cloth and a mild detergent. That is the entire routine for a non-porous engineered surface.
There is no sealing schedule. A 93% quartz body is not porous, so sealers have nothing to do.
Quartz Series from our own production. See the Quartz Series range.
Strong alkaline or acidic cleaners, oven cleaner and drain products. These attack the resin binder, not the quartz.
Abrasive pads on a polished finish. They dull the gloss in a way that cannot be cleaned back.
Hot pans placed directly on the surface. Use a trivet, or specify sintered stone where that habit is certain.
Wipe spills when they happen. Nothing soaks in, but pigmented liquids left to dry still need scrubbing.
Resin-bound quartz is an interior material. For terraces and outdoor kitchens use porcelain or sintered stone.
How the three engineered surfaces differ in body, heat behaviour and where each one belongs in a project.
Thickness decides edge detail, handling weight and support requirements. Both are standard in our production.
The three textures we produce, and what each one does to colour, fingerprints and maintenance.
The order sequence we use, from first sample through to a loaded container.
Two ways to get the same look, with very different programme and cost profiles.
Three ways to specify white, and how to avoid the warm-cast problem on large areas.
Codes exist so the same slab can be produced twice. Here is how to use them properly.
What arrives at your yard, and what to confirm before the container is packed.
Yes. Email [email protected] with the application, the exposure conditions and the look you are after.
Free samples go to distributors, builders and countertop factories. Testing a physical sample beats any article, including this one.
Engineered quartz at 93% quartz content, artificial marble, terrazzo, porcelain, sintered stone and nano glass, all on our own site in Nanyang.
Send the application and the exposure conditions and we will tell you which surface fits.
