Dry Wall Joint Tape
Fiberglass and Paper Drywall Joint Tape
A complete range of innovative drywall joint tapes and cracks repair products, each offering strength, flexibility, easy installation and considerable cost savings.
Key Benefits
- Stronger joint
- Suitable used in wet circumstance, protect crack and distortion
- Easy application
Application Scenarios
- Gypsum Board
- Kinds of wall cracks repairmen
Send the specification, weight or grit and the quantity you need. We reply with a quotation, packing details and lead time.
Request A Quote Request A SampleOverview
JOWA FIBER offers a full line of products for wall finishing. JOWA drywall joint tape family of products includes a complete range of innovative drywall joint tapes and cracks repair products, each offering strength, flexibility, easy installation and considerable cost savings.
Tape Range
1. Classic fiberglass drywall joint tape
Self-adhesive — for an easy application. High mechanical strength — fiberglass mesh for stronger joints. Smooth finish — open mesh to eliminate blisters and air bubbles.
2. Ultra-thin drywall tape
Thinner profile — over 30% thinner than standard paper drywall tape and regular fiberglass mesh tape, without compromising strength. Increased strength — 50% more intersection points and an increased number of fabric yarns for unparalleled durability. Ideal for ceilings — a thinner profile requires less compound for easier feathering and sanding.
3. Paper tape
Drywall joint tape with high strength and water tolerant, easy to cut by hands, symmetrical eyelet avoid fourthly for rudimental air. High strength and water tolerant.
Fiberglass Drywall Joint Tape
| Category | Specification | Density warp (count/25mm) | Density weft (count/25mm) | Unit weight (g/㎡) | Tensile strength warp (≥N/5cm×20cm) | Tensile strength weft (≥N/5cm×20cm) | Woven structure | Content of resin (%) |
|---|---|---|---|---|---|---|---|---|
| Standard | CNT55-8×6 | 8 | 6 | 55 | 550 | 450 | Leno | 28±2 |
| Standard | CNT65-9×9 | 9 | 9 | 65 | 550 | 550 | Leno | 28±2 |
| Standard | CNT75-9×9 | 9 | 9 | 75 | 550 | 650 | Leno | 28±2 |
| Extra thin | CNT75-20×10 | 20 | 10 | 75 | 700 | 700 | Plain | 28±2 |
| High strength | CNT110-2.5×2.3 | 2.5 | 2.3 | 110 | 1000 | 1000 | Leno | 28±2 |
| High strength | CNT110-5×5 | 5 | 5 | 110 | 1000 | 1000 | Leno | 28±2 |
Paper Tape
| Item | Unit | Index |
|---|---|---|
| Weight | g/㎡ | 145±5 |
| Tear strength ≥ vertical/horizontal | g/㎡ | 9/10 |
| Thickness | mm | 0.215–0.235 |
| Burst strength ≥ | KPAg/㎡ | 1.8 |
| Tensile strength after dipping water ≥ vertical/horizontal | KN/m | 1.2/0.7 |
Dry Wall Joint Tape FAQ
Which fiberglass joint tape specifications are standard?
CNT55-8×6, CNT65-9×9 and CNT75-9×9 are the standard grades, in unit weights of 55, 65 and 75 g/㎡.
What is the difference between the extra thin and high strength tapes?
The extra thin CNT75-20×10 uses a plain woven structure at 75 g/㎡ with 700 N tensile strength in both directions, while the high strength CNT110 grades reach 110 g/㎡ and 1000 N in both directions with a leno structure.
Can the tape be used in wet conditions?
Yes. The tape is suitable used in wet circumstance and protects against crack and distortion.
What are the paper tape indexes?
Weight 145±5 g/㎡, thickness 0.215–0.235 mm, burst strength ≥1.8 KPAg/㎡ and tensile strength after dipping water 1.2/0.7 KN/m vertical/horizontal.
Quote Dry Wall Joint Tape
Tell us the specification and quantity. Samples can be sent with the quotation.