Sawing
Double column horizontal metal band sawing machine GZ4233
Hydraulic control of feeding speed of sawing/cutting, stepless speed regulation.
The published data for this model lists band saw wire specifications ( of mm ) 34×1.1×4115mm and hydraulic motor ( of kw ) 0.75.
- Model code GZ4233
- Supplied by Shaanxi Jiade Group Co., Ltd, Xi'an, China
- Trade terms FOB, CFR, CIF, payment TT 30% with order and 70% before shipment
- Manual, packing list and shipping documents included
Product Overview
What the Double column horizontal metal band sawing machine GZ4233 Does
Hydraulic control of feeding speed of sawing/cutting, stepless speed regulation.
Manual or hydraulic clamping.
Small materials can be bundled cutting, with high efficiency.
Using antifriction bearing and hard alloy for guiding, thus prolonging service life of the saw blade.
Key Benefits
Why Workshops Buy This Machine
Keeps the Work In House
Operations that would otherwise be sent out stay on your floor, which is what removes bar stock cut by angle grinder, wasting material and squareness.
Parameters You Can Plan Around
The published data for this model lists band saw wire specifications ( of mm ) 34×1.1×4115mm and hydraulic motor ( of kw ) 0.75.
Documented and Supported
The machine ships with an operation manual and a named contact who answers on WhatsApp, so commissioning questions do not go unanswered.
Matched Tooling Available
Chucks, arbors, vises and measuring equipment from the same supplier, quoted with the machine instead of chased separately.
Application Scenarios
Where the Double column horizontal metal band sawing machine GZ4233 Earns Its Place
- Cutting bar stock to length before turning
- Sectioning tube and profile for fabrication
- Bundle cutting in a production bay
- Cut-off work in maintenance stores
Scenarios are typical for sawing of this type. If your part is outside them, send the drawing and we will say plainly whether this model suits it.
Who It Is For
The Buyers This Machine Was Specified For
Problems It Solves
Three Situations This Machine Fixes
Subcontracting Delay
Sending this operation out adds days to every job. Running it in house on the Double column horizontal metal band sawing machine GZ4233 removes the queue you do not control.
Parts No Longer Available
When an original part cannot be bought, the only route left is to make or restore it, which needs the capacity this machine provides.
Unpredictable Quality
Work done on improvised equipment varies between operators. A purpose built machine with published parameters makes the result repeatable.
Technical Features
Features Listed by the Manufacturer
- Small materials can be bundled cutting, with high efficiency.
- Using antifriction bearing and hard alloy for guiding, thus prolonging service life of the saw blade.
Specifications
Published Parameter Table
| Band saw wire specifications ( | mm ) 34×1.1×4115mm |
|---|---|
| Hydraulic motor ( | kw ) 0.75 |
| Clamping method Hydraulic Band saw wire speed (m/ | min ) 22/35/50/75m/ |
| Cooling pump ( | kw ) 0.09 |
Materials Manufacturing and Quality Control
How the Machine Is Built and Checked
Casting and Machining
Beds, columns and housings are machined in the group's production workshop on conventional and CNC equipment.
Assembly
Assembly is done in a dedicated workshop rather than on the production floor, which keeps swarf away from fitted surfaces.
Inspection
The inspection department checks components and assemblies before the machine goes to paint. Test records per machine are TBC on request.
Paint and Packing
Painting is done in house, then the machine is rust protected, crated and prepared for the container.
Certification scope for this model is marked TBC. We attach the certificates that actually apply to the machine and destination instead of publishing a blanket claim.
Customization Options
What Can Be Changed Before Production
- Motor voltage and frequency to match your supply, stated with the order
- Tooling and workholding packages selected for your first jobs
- Model variant chosen against your maximum workpiece size
- Documentation and marking requirements for your destination, TBC per country
Send a drawing of the part you need to produce. We select the model against that drawing rather than pushing the largest machine in the range.
Comparison With Other Models
Other Sawing Models Worth Comparing
| Double column horizontal metal band sawing machine GZ4233 | Band saw wire specifications ( mm ) 34×1.1×4115mm · this page |
|---|---|
| G7016 Metal cutting Hack Saw machine | Hack saw blade( mm ) 350x25x1.25mm · compare |
| Automatic Power Hacksaw Machine G7025 | Machine Net Weight/G W 550kg/600kg · compare |
| Hack Sawing Machine GL7132 | Parameters supplied with quotation · compare |
| G4250 Double Column Horizontal Metal Band Sawing Machine | Saw belt ( mm ) 3505*27*0.9 4115*34*1.1 5000×41×1.3 5450*41*1.3 · compare |
Use Guide
Before and After the Machine Arrives
Check the Foundation
Confirm floor loading, levelling points and the space needed around the machine before the container arrives.
Power and Air
Match supply voltage and frequency to the machine data plate and provide the isolator and any compressed air the model needs.
Level and Run In
Level the machine, check the oil levels, then run the spindle or drive up through its speed range before cutting.
First Article and Service
Machine a test piece, measure it, and keep a service schedule from day one. Send us the measurement if something looks wrong.
Related Products
More From the Sawing Range
Related Guides and Solutions
Read Before You Order
Buying Guide
Choosing a Band Saw for Bar Stock and Profile
Blade speed, feed force and how the material is clamped decide cut quality and blade life. Machine class follows from how much you cut, not from what you cut.
SolutionComplete Engine Rebuilding Workshop
A machine list that covers a cylinder head and block from strip-down to final assembly.
Answers
Double column horizontal metal band sawing machine GZ4233 Questions
What is the band saw wire specifications ( of the Double column horizontal metal band sawing machine GZ4233?
The manufacturer data for this model gives band saw wire specifications ( mm ) 34×1.1×4115mm. The full parameter list for every variant is in the specification table on this page and is confirmed in writing with the quotation.
Can you help me select the right variant of the Double column horizontal metal band sawing machine GZ4233?
Yes. Send the part drawing, the workpiece size and the output you need and our engineers propose the model that fits. If you already know the model code, quote it and we confirm availability.
What are the trade and payment terms?
We work on FOB, CFR, CIF terms. Payment is TT 30% with order and 70% before shipment, or irrevocable L/C at sight. Orders placed through our Alibaba account carry trade assurance cover up to USD 300,000.
How is the Double column horizontal metal band sawing machine GZ4233 packed for export?
The machine is cleaned, rust protected and fixed to a pallet or into a wooden case sized for that machine, then stuffed into a container or shipped break bulk when it is over height. Packing is confirmed before production starts.
What is the delivery time?
Delivery depends on the model and on stock at the time of order, so we confirm a firm date on the proforma invoice instead of quoting one standard figure for the whole catalogue.
Do you supply tooling and spare parts for the Double column horizontal metal band sawing machine GZ4233?
Yes. Chucks, arbors, vises and consumables are listed in our accessories range, and wear parts for this machine can be quoted with the machine or shipped later.
Get a Price for the Double column horizontal metal band sawing machine GZ4233
Tell us the destination port and the variant you need. You get a specification, packing dimensions and a price.