Fiberglass Mat
Chopped strand mat, stitched mat, core combination mat, woven roving combo mat, surface veil and peel ply for hand lay-up, RTM and vacuum infusion.
7 Products
Fiberglass Reinforcement · TongXiang China
Fiberglass Mat Roving Fabric and Infusion Consumables
HongMing Composites produces and distributes fiberglass and its fabrics for hand lay-up vacuum infusion RTM filament winding spray up and pultrusion. 15 products across 6 ranges supplied to leading manufacturers in more than 40 countries.
15Products
6Product Ranges
40+Countries Supplied
2800mm Max Width
Product Ranges
6 Ranges of Fiberglass Reinforcement
Every product page carries the technical data sheet HongMing publishes for that item.
Woven Roving and Multi-axial Fabric
E glass woven roving and multi-axial fabric for hand lay-up, filament winding and pultrusion reinforcement.
2 Products
Fiberglass Roving
E glass assembled roving and direct roving for spray up, SMC, filament winding, pultrusion and weaving.
2 Products
Vacuum Process Film
Bagging film and perforated film for vacuum infusion and pre-preg processing.
2 Products
Polyester Net
Polyester net used as a resin flow and distribution layer in vacuum infusion.
1 Product
Other Products
Flow media for resin distribution in the vacuum infusion process.
1 Product
By Process
Matched to the Moulding Process You Run
Which HongMing products suit each composite process, taken from the application notes on the product pages.
Hand Lay-up
Chopped strand mat, woven roving and surface veil for open moulding.
Vacuum Infusion
Flow media, polyester net, peel ply, bagging film and perforated film.
RTM and LRTM
Core combination mat and stitched mat for closed mould processing.
Filament Winding
Direct roving and surface veil for pipe and tank winding.
Spray Up and SMC
Assembled roving in gun, SMC, chop and panel grades.
Pultrusion
Direct roving and multi-axial fabric for continuous profiles.
Catalogue
All 15 Products
Film
Bagging Film
Bagging film has good elongation, and excellent performance. The auto-release property makes it a good choice
Mat
Core Combination Mat
Core Combination mat consists of a synthetic non-woven core or woven fabrics, sandwiched between chopped
Roving
E Glass Assembled Roving
E glass assembled roving includes Gun roving (Spray up roving), SMC roving, Chop roving, Panel roving, HOBAS
Mat
E Glass Chopped Strand Mat
Chopped strand mat is made with chopped strands of E-glass bound with a powder binder or emulsion binder
Roving
E Glass Direct Roving
Direct Roving is primarily designed for production of composites by filament winding, pultrusion and weaving
Woven Roving
E Glass Woven Roving
E glass woven roving are compatible with many resin systems such as polyester, vinyl ester, epoxy and
Mat
Fiberglass Surface mat (Veil)
Surface mat is mainly used in the surface layers of FRP products, its features even Fiber distribution, soft
Others
Flow Media
Mould Flow media is a low cost mesh for ease the flow property of resin under vacuum infusion process. Which
Woven Roving
Multi-axial Fabric
Multi - axial include Uni-Directional, Biaxial, Triaxial and Quadraxial Fabrics. The entire Partial warp
Mat
Nylon Peel Ply
A removable outside fabric ply molded onto the surface of a laminate to provide a chemically clean surface
Film
Perforated Film
Perforated film is a very clean and smooth film. Which have very good mechanical property, even transparent
Net
Polyester Net
Polyester net is mainly used for the squeezing out the air bubbles. Normally is used after the pipe liner is
Mat
Polyester Veil
Polyester veil are textile fabrics made of oriented o randomly polyester fibers.
Mat
Stitched Chopped Strand mat
Stitched Chopped mat is made by chopping continuous strands into chopped strands and stitching them together.
Mat
Woven Roving Combo Mat
Woven Roving Combo Mat is a complex mat made by stitching together woven roving and a layer of distributed
About HongMing
A Fiberglass Producer and Distributor
HongMing Composites specializes in producing and distributing fiberglass and its fabrics, and is committed to participating in partnerships with our customers that are based on supplying quality products at the most competitive prices, as well as offering first class service with professional advice.
HongMing Composites currently is supplying leading manufacturers in more than 40 countries worldwide.
- Company
- HONGMING COMPOSITES CO., LTD.
- Address
- No.816 DongSheng Road, WuZhen Town, TongXiang, ZheJiang, China
- Telephone
- +86 573 8818 2056
- Fax
- +86 573 8818 5050
- [email protected]
Answers
Frequently Asked Questions
Where is HongMing Composites located?
HONGMING COMPOSITES CO., LTD. is at No.816 DongSheng Road, WuZhen Town, TongXiang, ZheJiang, China, postcode 314504. The telephone number is +86 573 8818 2056 and the fax number is +86 573 8818 5050.
How many countries does HongMing supply?
HongMing Composites currently supplies leading manufacturers in more than 40 countries worldwide.
How do I request a quotation?
Email the product names and quantities you need to [email protected], or call +86 573 8818 2056.
What does HongMing Composites produce?
HongMing Composites specializes in producing and distributing fiberglass and its fabrics, including chopped strand mat, stitched mat, core combination mat, surface veil, woven roving, multi-axial fabric, assembled and direct roving, polyester net, flow media and vacuum process film.
Which composite processes do HongMing products suit?
The catalogue covers hand lay-up, vacuum infusion, RTM and LRTM, filament winding, spray up, SMC, pultrusion and weaving. Each product page states the processes given in its own technical data.
What is the widest material HongMing supplies?
Core combination mat is listed at a maximum width of 2700 mm, chopped strand mat at 100 to 2800 mm and bagging film at a maximum width of 6.1 m.
Next Step
Send Us Your Specification
Give us the product, the unit weight and the width you need and we will come back with a quotation.