CuZr — C15000
CuZr – UNS.C15000 Zirconium Copper is an excellent and unique copper alloy with high electrical conductivity, hardness, and ductility, moderate strength
CuZr — C15000
CuZr – UNS.C15000 Zirconium Copper is an excellent and unique copper alloy with high electrical conductivity, hardness, and ductility, moderate strength, and excellent resistance to softening at elevated temperatures. The addition of 0.15% zirconium (Zr) to copper results in a heat treatable copper alloy which may be solution treated and subsequently aged to produce these desirable properties. Rod is supplied from the mill in the fully aged and drawn condition so no further heat treatment is required by the fabricator. The softening temperature of properly heat treated C15000 rod exceeds 500°C as compared to unalloyed, pure copper which softens at 200°C and silver bearing coppers which soften at 350°C.
Where C15000 Is Used
Typical end uses published by ALB for this grade.
Electrical Industry
Resistance Welding Electrodes, Circuit Breaker Switches, Stud Bases for Power Transmitters, Rectifiers, Diodes, Switches, Commutators
Consumer
Rod Extensions, Pencil-type, Light Soldering Guns, Tips
Industrial
Connectors, Solderless Wrapped, Welding Wheels, Resistance Welding Tips
Specifications And Material Data
| Zr | 0.15-0.20% |
|---|---|
| Cu | Balance |
Copper plus additions equal 99.90% minimum.
| Density at 68°F | 0.321 Lbs./In.3 |
|---|---|
| Specific Gravity | 8.89 |
| Melting Point (Liquidus) | 1080°C (1976°F) |
| (Solidus) | 980°C (1796°F) |
| Coefficient of Thermal Expansion per °F | 9.4 x 10-6 (68-212°F) 9.8 x 10-6 (68-572°F) 11.2 x 10-6 (68-1200°F) |
| Electrical Conductivity at 68°F (volumetric) | 85-95% IACS (aged and drawn) 55-72% IACS (solution annealed) |
| Thermal Conductivity Btu/ft.2/ft./hr./°F at 68°F | 212 |
| Modulus of Elasticity - Tension | 18,700 ksi |
1). the units are based upon US Customary. 2). the typical physical properties apply to age hardened products.
Sizes And Product Forms
Available Sizes
Custom Diameter & Sizes, Random Mill lengths
Available Products And Forms
Round bars, Flat bars, Square bars, Rectangular bars, Hexagon bars, Plates
Custom shapes are available upon request.
International Specification
| Rods/Bars/Plates/Sheets | UNS.C15000, RWMA Class 1, SAE J461,463; ISO5182-1991 |
|---|---|
| European Standards | CuZr, DIN 2.1580, CW120C to EN |
Unless otherwise specified, material will be produced to ISO & RWMA.
Abbreviations
- ASTM — American Society for Testing and Materials
- SAE — Society of Automotive Engineers
- RWMA — Resistance Welder Manufacturers' Association
Tempers And Mechanical Data
The detailed Mechanical Properties will be available on request from customers.
Frequently Asked Questions
Answers drawn from the ALB technical data for this page.
What is the chemical composition of C15000?
C15000 is supplied to the following nominal composition:
- Zr: 0.15-0.20%
- Cu: Balance
What are the typical physical properties of C15000?
Typical values published by ALB for C15000:
- Density at 68°F: 0.321 Lbs./In.3
- Specific Gravity: 8.89
- Melting Point (Liquidus): 1080°C (1976°F)
- (Solidus): 980°C (1796°F)
- Coefficient of Thermal Expansion per °F: 9.4 x 10-6 (68-212°F) 9.8 x 10-6 (68-572°F) 11.2 x 10-6 (68-1200°F)
- Electrical Conductivity at 68°F (volumetric): 85-95% IACS (aged and drawn) 55-72% IACS (solution annealed)
- Thermal Conductivity Btu/ft.2/ft./hr./°F at 68°F: 212
- Modulus of Elasticity - Tension: 18,700 ksi
Which international specifications does C15000 meet?
- Rods/Bars/Plates/Sheets: UNS.C15000, RWMA Class 1, SAE J461,463; ISO5182-1991
- European Standards: CuZr, DIN 2.1580, CW120C to EN
Can you supply mechanical property data for C15000?
The detailed Mechanical Properties will be available on request from customers.
Which product forms and sizes are available?
Custom Diameter & Sizes, Random Mill lengths Round bars, Flat bars, Square bars, Rectangular bars, Hexagon bars, Plates Custom shapes are available upon request.
How do I request a quotation?
Email the grade, temper, dimensions and quantity to [email protected]. Unless otherwise specified, material is produced to ASTM.
Quote C15000 To Your Specification
Send grade, temper, dimensions and quantity. Custom shapes are available on request.