The slab is a near-white neutral surface with a consistent mid-warm beige tone. No visible veining or chips are present in the tones range.
Swatches sampled from the slab photograph. Screen colour is not slab colour, so approve a physical sample before ordering.
Porcelain AS (8) is a full-body porcelain slab with a uniform mid-beige appearance. It is used by slab importers, countertop fabricators, and builders for interior surfaces. The slab is suitable for applications where a subtle, consistent tone is required.
Slab importers and countertop fabricators seeking a consistent mid-beige porcelain slab
Sourcing a uniform, mid-beige porcelain slab with minimal colour variation across batches
Consistent colour across all slabs minimizes batch variation
High quartz content improves durability and resistance to wear
Available in multiple thicknesses and surface finishes for fabrication flexibility
Compared with engineered quartz this slab holds colour under UV and tolerates outdoor use, which quartz is not specified for. It needs the right tooling to cut without chipping.
Values marked TBC are confirmed per order rather than guessed at here.
| Colour code | Porcelain AS (8) |
|---|---|
| Collection | Porcelain Slabs |
| Material | Full-body porcelain |
| Thickness | 2 cm and 3 cm standard, custom on request |
| Surface finish | Polished, honed or leathered |
| Edge profiles | Six profiles including bullnose, ogee bullnose step, radius and mitre |
| Slab size | TBC - confirmed per order |
| Minimum order quantity | TBC - confirmed per order |
| Production standard | ISO 9001 production control |
| Manufactured in | Nanyang, Henan, China |
Quartz aggregate, resin and pigment are weighed to the recipe recorded against the colour code.
The mix is laid up so the pattern falls the way the design specifies rather than at random.
The slab is compacted under vacuum and vibration to drive out air voids.
The pressed slab is cured so the binder reaches full strength before any machining.
Slabs are calibrated to thickness and finished polished, honed or leathered.
Slabs are checked against the colour code, then bundled on A-frames for sea freight.
Store slabs vertically on an A-frame. Flat stacking large formats invites cracks that only show when the slab is lifted.
Confirm vein direction before cutting on patterned codes, and dry-lay bookmatched pairs before committing the cut.
Warm water, a soft cloth and a mild detergent. Avoid oven cleaner, drain products and abrasive pads on a polished finish.
Vanity work is a small-part business: many pieces, tight sizes, high cut-out count.
Hospitality projects buy a look once and then need it repeated across hundreds of rooms and several phases.
Commercial interiors put surfaces in front of a lot of people and very little maintenance budget.
Yes, free samples are available for distributors, builders, and countertop factories.
Polished, honed, and leathered finishes are available for Porcelain AS (8).
Yes, standard thicknesses are 2 cm and 3 cm. Custom thicknesses can be requested.
Yes. Email [email protected] with the code Porcelain AS (8), the thickness and the finish you want, plus a shipping address. Samples are free to distributors, builders and countertop factories.
2 cm and 3 cm are standard across the range. Custom thicknesses are developed on request.
Order against the same code, thickness and finish. Codes are produced to a recorded recipe, which is what makes a repeat order match.
Porcelain AS (36)Porcelain Slabs
Porcelain AS (35)Porcelain Slabs
Porcelain AS (34)Porcelain Slabs
Porcelain AS (33)Porcelain Slabs
Porcelain AS (32)Porcelain Slabs
Porcelain AS (31)Porcelain Slabs
Porcelain AS (30)Porcelain Slabs
Porcelain AS (29)Porcelain Slabs
Porcelain AS (28)Porcelain Slabs
Porcelain AS (27)Porcelain SlabsHow the three engineered surfaces differ in body, heat behaviour and where each one belongs in a project.
Thickness decides edge detail, handling weight and support requirements. Both are standard in our production.
The order sequence we use, from first sample through to a loaded container.
Tell us the thickness, finish and quantity you need and we will come back with availability.