The slab is a near-black neutral surface with subtle variations in dark neutral tones. It features a uniform distribution of aggregate chips in a bound matrix, creating a consistent terrazzo effect without visible veining or bright highlights.
Swatches sampled from the slab photograph. Screen colour is not slab colour, so approve a physical sample before ordering.
Inky Green Terrazzo is a manufactured terrazzo slab with a high quartz content and a bound matrix. It is used by countertop fabricators and builders for interior surfaces in residential and commercial projects. The slab is available in standard and custom thicknesses with multiple surface finishes.
Countertop fabricators and builders seeking a consistent, dark neutral terrazzo slab
Sourcing a uniform dark terrazzo slab with predictable colour and chip distribution across batches
Consistent colour across all slabs due to controlled manufacturing
Durable surface suitable for high-traffic areas
Available in multiple textures and edge profiles for design flexibility
Compared with poured terrazzo this slab arrives finished, with no site grinding and no curing time in the programme. Joints exist, but chip pattern stays consistent between slabs of the same code.
Values marked TBC are confirmed per order rather than guessed at here.
| Colour code | Inky Green Terrazzo |
|---|---|
| Collection | Terrazzo |
| Material | Aggregate chip terrazzo in a bound matrix |
| Thickness | 2 cm and 3 cm standard, custom on request |
| Surface finish | Polished, honed or leathered |
| Edge profiles | Six profiles including bullnose, ogee bullnose step, radius and mitre |
| Slab size | TBC - confirmed per order |
| Minimum order quantity | TBC - confirmed per order |
| Production standard | ISO 9001 production control |
| Manufactured in | Nanyang, Henan, China |
Quartz aggregate, resin and pigment are weighed to the recipe recorded against the colour code.
The mix is laid up so the pattern falls the way the design specifies rather than at random.
The slab is compacted under vacuum and vibration to drive out air voids.
The pressed slab is cured so the binder reaches full strength before any machining.
Slabs are calibrated to thickness and finished polished, honed or leathered.
Slabs are checked against the colour code, then bundled on A-frames for sea freight.
Store slabs vertically on an A-frame. Flat stacking large formats invites cracks that only show when the slab is lifted.
Confirm vein direction before cutting on patterned codes, and dry-lay bookmatched pairs before committing the cut.
Warm water, a soft cloth and a mild detergent. Avoid oven cleaner, drain products and abrasive pads on a polished finish.
Commercial interiors put surfaces in front of a lot of people and very little maintenance budget.
Cladding is a yield exercise.
Furniture makers buy stone by the piece, not the container, and they need the same top made a hundred times.
Yes, the slab is suitable for standard fabrication processes including cutting, polishing, and edge profiling.
The slab is available in polished, honed, and leathered textures to suit different design preferences.
Yes, custom thicknesses are available upon request to meet specific project requirements.
Yes. Email [email protected] with the code Inky Green Terrazzo, the thickness and the finish you want, plus a shipping address. Samples are free to distributors, builders and countertop factories.
2 cm and 3 cm are standard across the range. Custom thicknesses are developed on request.
Order against the same code, thickness and finish. Codes are produced to a recorded recipe, which is what makes a repeat order match.
The order sequence we use, from first sample through to a loaded container.
Two ways to get the same look, with very different programme and cost profiles.
What arrives at your yard, and what to confirm before the container is packed.
Tell us the thickness, finish and quantity you need and we will come back with availability.
